Author Topic: My 500HP Engine Build (Read 25574 times)

ihawk95 · « **Reply #25 on:** January 19, 2015, 09:32:11 AM »

Quote from: IBDRINKEN on January 17, 2015, 08:55:32 PM

What does anyone know about the Opel injectors. Any I sight on these would be much appreciated.

http://shop.zzperformance.com/store/p/1239-Opel-HP-Direct-Injection-Fuel-Injectors.aspx

I thought I read Antonio was going to try them on his build. Check with him as I know I read he had researched them.

GXP_Matt · « **Reply #26 on:** January 19, 2015, 11:19:28 AM »

Yeah that dyno is from a Subaru, probably with a single scroll, super long up-pipe. That really hurts the ability to make high HP numbers- I would expect a 7163 running high boost with enough fuel to make over 500whp on an LNF. There are some Subarus running single scroll 7163s making over 500whp- check out the Jager Racing Time Attack car. It is a very well built (read:$$$$$) setup though. I would suggest a twin scroll manifold and the 0.8 A/R twin scroll "G" turbine housing for your build for best results, but a "ZFR" style single scroll TH on the stock exhaust manifold should still work okay.

IBDRINKEN · « **Reply #27 on:** January 19, 2015, 12:45:26 PM »

Thanks for the info Matt. I'll hit him up and see what he says. I just bought the werks springs to go along with the ferra valves

IBDRINKEN · « **Reply #28 on:** January 22, 2015, 03:38:04 PM »

These came in today

TomatoSoup · « **Reply #29 on:** January 22, 2015, 03:51:08 PM »

I guess you'll still have to wait for the other 14?

IBDRINKEN · « **Reply #30 on:** January 22, 2015, 03:55:01 PM »

Lmao. I have the other 14

Sol Asylum · « **Reply #31 on:** January 22, 2015, 04:31:48 PM »

Quote from: TomatoSoup on January 22, 2015, 03:51:08 PM

I guess you'll still have to wait for the other 14?

Yeah he just got the final two he needed.

elff · « **Reply #32 on:** January 22, 2015, 05:23:28 PM »

Hahahahahahaha

IBDRINKEN · « **Reply #33 on:** January 22, 2015, 05:36:08 PM »

All I could afford was the 2 lol

IBDRINKEN · « **Reply #34 on:** January 23, 2015, 03:03:26 PM »

These arrived

Sol Asylum · « **Reply #35 on:** January 23, 2015, 04:31:38 PM »

Wow! Is that a complete set?

IBDRINKEN · « **Reply #36 on:** January 23, 2015, 04:48:55 PM »

Quote from: Sol Asylum on January 23, 2015, 04:31:38 PM

Wow! Is that a complete set?

Yes it is

Gentleman Jack · « **Reply #37 on:** January 23, 2015, 06:50:51 PM »

Slinky?

Kelu · « **Reply #38 on:** January 25, 2015, 02:22:27 PM »

Quote from: Sol Asylum on January 23, 2015, 04:31:38 PM

Wow! Is that a complete set?

Looks like a half of a set if we are talking about a V8

Sol Asylum · « **Reply #39 on:** January 25, 2015, 07:50:07 PM »

Or if he was doing a dual spring upgrade.

IBDRINKEN · « **Reply #40 on:** January 25, 2015, 08:06:53 PM »

The reason for the single springs is that I have had mixed reviews on the supertechs so I went with the werks springs.

Kelu · « **Reply #41 on:** January 26, 2015, 05:21:35 AM »

I will let you know about supertech ones, I just got those

What are the bad parts of supertech which you didn't like?

IBDRINKEN · « **Reply #42 on:** January 26, 2015, 10:08:00 AM »

I thought i read somewhere that on the 78# springs that there was a problem with them and they stopped making them. Which ones did you get buy

Kelu · « **Reply #43 on:** January 26, 2015, 01:34:14 PM »

I got the #75 kit, you heard anything about these?

IBDRINKEN · « **Reply #44 on:** January 26, 2015, 01:56:21 PM »

Quote from: Kelu on January 26, 2015, 01:34:14 PM

I got the #75 kit, you heard anything about these?

No not at all.

LatinVenom · « **Reply #45 on:** January 26, 2015, 06:11:33 PM »

Those are the ones ZZP sells and are the ones you should have purchased for your build.

Kelu · « **Reply #46 on:** January 26, 2015, 06:43:01 PM »

Quote from: LatinVenom on January 26, 2015, 06:11:33 PM

Those are the ones ZZP sells and are the ones you should have purchased for your build.

To which ones do you refer?

IBDRINKEN · « **Reply #47 on:** January 26, 2015, 07:43:35 PM »

Me or kelu

blackbirdracing · « **Reply #48 on:** January 26, 2015, 08:23:17 PM »

Well obviously Kelu. Zzp doesn't sell Werks springs.

Your werks springs will be fine. They are made by the same company that makes the Katec springs for the C6r race teams to us.

IBDRINKEN · « **Reply #49 on:** January 26, 2015, 09:49:32 PM »

That's what's I thought I got confused for a minute

News:

Welcome Guest!!!

Author Topic: My 500HP Engine Build (Read 25574 times)