Welcome Guest!!!

Thank you for visiting the GM Kappa Performance Forum. This forum is the only performance oriented forum for all GM Kappa Platform Enthusiasts.  We hope you will join and share your experiences.  Becoming a member is FREE! If you want to advertise on this forum, email KappaPerformance at yahoo.com.


Registration required to view the forum attachments. Below is a sample of the current top 25 topics.
Supporting Membership has many advantages.


More information on becoming a supporting member or vendor can be found on the sub forum; Site Help and Suggestions; thread - Supporting Members and Vendors.

Author Topic: DDMWorks Puddle Lights  (Read 3136 times)

0 Members and 1 Guest are viewing this topic.

Offline Dave@DDMworks

  • Vendor
  • Gearhead
  • *
  • Posts: 1030
  • Karma: +11/-0
  • Location: Greenville, South Carolina
    • DDMworks
DDMWorks Puddle Lights
« on: January 23, 2015, 04:50:54 PM »
DDMWorks Puddle Lights for the Solstice and Sky.

If you are looking for a nice little winter project, here it is!

This was a fun little project that we came up with to add a little style and functionality to the Solstice/Sky. These are specifically designed puddle lights to mount in the bottom of your door and use the Solstice and Sky silhouette's. After installation our puddle lights automatically project a 16" diameter Solstice or Sky silhouette at your feet everytime you open the door. The projected silhouette creates a nice light to help you see at night, while also giving a little bit of eye catching style. The kit is only $55 and can be ordered on our site now -

Link for more information or to order - Puddle Lights for the Solstice and Sky by DDMWorks



Installation does take a couple hours to complete, but is pretty straightforward and does not require any specialized tools. Our kit comes complete with everything needed to do the installation including the lights, instructions for install and even the drill bit needed to install the lights in the doors. When installed you can not see the lights themselves, just the projected image on the ground. Of course if you have any questions before, during or after the install you can reach us on our tech support line - 864-907-6004.

If you have an idea for a Custom logo, just let us know, we can do it!



Link for more information or to order - Puddle Lights for the Solstice and Sky by DDMWorks
Dave Michel
DDMWorks
Sales - 864-438-4949
Tech Support - 864-907-6004

WWW.DDMworks.com
Dave@DDMWorks.com

Stage 3 Supercharged 2.4L - 314whp - 93 octane
Rotrex Supercharged 2.4L - 303whp - 93 octane
2871 Hybrid turbo 2.0L - 371whp - 93 octane

Offline Critterman

  • Retired, thank you very much
  • Lifetime Supporting
  • General Manager
  • *
  • Posts: 12335
  • Karma: +17/-54
  • Baltimore/Washington Corridor
Re: DDMWorks Puddle Lights
« Reply #1 on: January 23, 2015, 06:46:26 PM »
Will they fit in my existing light fittings?
2006 Cool named BIXABEL (BISH-AH-BEL) Mayan for "Good Roads"

DDM
StageIII intercooled Supercharger, Wisco ceramic coated pistons, Carrillo rods, superTech valves and Springs
Ported and polished head
Exedy Stage II Clutch
big brake kit, slotted/drilled Rotors w/Porterfield pads & blue juice
Backbone, Probeam, Cross Strut Brace
Underhood, trunk, & door Lights
ZOK suspension
Lambo Doors

JPM
Center console, door inserts, & dash
Seat bolster & lumbar support

Focuztech Tri-Y Header & hi-flow cat
Solo Performance SQR-2
Norm's Rear facia
Heated Seats
Black Cat inserts

Offline Gentleman Jack

  • I haven't been relevant for a while
  • Lifetime Supporting
  • Shop Foreman
  • *
  • Posts: 8254
  • Karma: +19/-78
  • Location: Unknown
  • When I'm walkin' I strut my stuff
Re: DDMWorks Puddle Lights
« Reply #2 on: January 23, 2015, 06:49:54 PM »
No credit to Critterman, the originator of the under door lighting  in the solstice.
Wow. I really thought Ivy liked Critter. But, as with most women, she can't stand him.

Sorry to break your heart Critterman.
May the Schwartz be wit you

Online Sol Asylum

  • Lifetime Supporting
  • Shop Foreman
  • *
  • Posts: 8684
  • Karma: +35/-63
  • Location: Tolono Illinois
  • THAT'S MISTER KAPPA ASSYLUM TO YOU!
Re: DDMWorks Puddle Lights
« Reply #3 on: January 23, 2015, 07:42:19 PM »
Dave can we get a set of these lights that project recessed grills on the front of the car?

GJ I think we would have to install these on the front of Critter's doors to get them to work right.

PS Critter, sorry to hear about you and Ivy.
2007 Aggressive GXP

Offline DeepBlueGXP

  • KappaPerformance Site Owner
  • Administrator
  • Shop Foreman
  • *
  • Posts: 8902
  • Karma: +11/-6
  • Location: Southern Maryland
  • Displaced Buffalo Bills Fan
    • Kappa Performance Forum
Re: DDMWorks Puddle Lights
« Reply #4 on: January 23, 2015, 08:16:00 PM »
Can you do the Pontiac symbol?


Offline Dave@DDMworks

  • Vendor
  • Gearhead
  • *
  • Posts: 1030
  • Karma: +11/-0
  • Location: Greenville, South Carolina
    • DDMworks
Re: DDMWorks Puddle Lights
« Reply #5 on: February 02, 2015, 02:39:43 PM »
Will they fit in my existing light fittings?

I am not sure actually, I don't remember what size hole we had to drill for those. If you can take a look at the bottom of your door, the hole size for these lights is just about 15/16".

Dave Michel
DDMWorks
Sales - 864-438-4949
Tech Support - 864-907-6004

WWW.DDMworks.com
Dave@DDMWorks.com

Stage 3 Supercharged 2.4L - 314whp - 93 octane
Rotrex Supercharged 2.4L - 303whp - 93 octane
2871 Hybrid turbo 2.0L - 371whp - 93 octane

Offline Dave@DDMworks

  • Vendor
  • Gearhead
  • *
  • Posts: 1030
  • Karma: +11/-0
  • Location: Greenville, South Carolina
    • DDMworks
Re: DDMWorks Puddle Lights
« Reply #6 on: February 02, 2015, 02:40:21 PM »
Can you do the Pontiac symbol?



Yeap!, these have actually been selling really well, so we are going to get some of the Pontiac Logo made, the Saturn Logo and the Solstice Coupe
Dave Michel
DDMWorks
Sales - 864-438-4949
Tech Support - 864-907-6004

WWW.DDMworks.com
Dave@DDMWorks.com

Stage 3 Supercharged 2.4L - 314whp - 93 octane
Rotrex Supercharged 2.4L - 303whp - 93 octane
2871 Hybrid turbo 2.0L - 371whp - 93 octane

Offline Critterman

  • Retired, thank you very much
  • Lifetime Supporting
  • General Manager
  • *
  • Posts: 12335
  • Karma: +17/-54
  • Baltimore/Washington Corridor
Re: DDMWorks Puddle Lights
« Reply #7 on: February 02, 2015, 07:24:58 PM »
How about one that says "DDMWorks"?
2006 Cool named BIXABEL (BISH-AH-BEL) Mayan for "Good Roads"

DDM
StageIII intercooled Supercharger, Wisco ceramic coated pistons, Carrillo rods, superTech valves and Springs
Ported and polished head
Exedy Stage II Clutch
big brake kit, slotted/drilled Rotors w/Porterfield pads & blue juice
Backbone, Probeam, Cross Strut Brace
Underhood, trunk, & door Lights
ZOK suspension
Lambo Doors

JPM
Center console, door inserts, & dash
Seat bolster & lumbar support

Focuztech Tri-Y Header & hi-flow cat
Solo Performance SQR-2
Norm's Rear facia
Heated Seats
Black Cat inserts

Offline ihawk95

  • Lifetime Supporting
  • Gearhead
  • *
  • Posts: 3044
  • Karma: +14/-27
  • Location: Cleveland Rocks/Sweet Home Chicago
Re: DDMWorks Puddle Lights
« Reply #8 on: February 02, 2015, 08:30:02 PM »
How about the DDM Devil??

Offline MomsSol

  • Lifetime Supporting
  • Gearhead
  • *
  • Posts: 1189
  • Karma: +4/-11
  • Location: In the back room!
Re: DDMWorks Puddle Lights
« Reply #9 on: February 02, 2015, 10:34:37 PM »
Yeap!, these have actually been selling really well, so we are going to get some of the Pontiac Logo made, the Saturn Logo and the Solstice Coupe
Pontiac logo with Red LEDs ???? 
Just here to help a friend! :thumbs:
True Lady Gearhead :)
We'll Miss You PONTIAC! :cryin:


Offline bds

  • Tech
  • **
  • Posts: 17
  • Karma: +0/-0
  • Location: Holly Springs, NC
Re: DDMWorks Puddle Lights
« Reply #10 on: February 02, 2015, 11:57:11 PM »
Has anyone installed the puddle lights so that they work with the VDI hinges? (Doors up?)

Offline MARVIC 1

  • Lifetime Supporting
  • Master Tech
  • *
  • Posts: 263
  • Karma: +1/-6
  • Location: Florida
Re: DDMWorks Puddle Lights
« Reply #11 on: February 03, 2015, 12:56:08 AM »
Has anyone installed the puddle lights so that they work with the VDI hinges? (Doors up?)
No reason why they shouldn't work with VDI door hinges. Only difference, light will be shining on someones forehead instead of the ground.... :)

Offline Gentleman Jack

  • I haven't been relevant for a while
  • Lifetime Supporting
  • Shop Foreman
  • *
  • Posts: 8254
  • Karma: +19/-78
  • Location: Unknown
  • When I'm walkin' I strut my stuff
Re: DDMWorks Puddle Lights
« Reply #12 on: February 03, 2015, 03:14:51 AM »
Install the light fixture in a gyro mount and it will always point down. The image would be huge with the doors up.
May the Schwartz be wit you

Offline Helios

  • Lifetime Supporting
  • Gearhead
  • *
  • Posts: 1268
  • Karma: +4/-3
  • Location: Charleston, SC
  • Play Hard; Drive Harder!
Re: DDMWorks Puddle Lights
« Reply #13 on: February 03, 2015, 08:47:23 AM »
Has anyone installed the puddle lights so that they work with the VDI hinges? (Doors up?)

You could possibly use a piece of PVC pipe with one end cut at an angle and painted black as an adapter ring to orient the puddle light properly with the VDI equipped door up. I'm not sure how it would make the puddle light look when the door is not raised (perhaps a bit oblong?). However, the adapter ring could cause clearance issues.
« Last Edit: February 03, 2015, 10:27:44 AM by Helios »
"Gwyneth"
V8 swap in progress
RPi GT/ SOLO Exhaust

Offline Critterman

  • Retired, thank you very much
  • Lifetime Supporting
  • General Manager
  • *
  • Posts: 12335
  • Karma: +17/-54
  • Baltimore/Washington Corridor
Re: DDMWorks Puddle Lights
« Reply #14 on: February 03, 2015, 10:02:51 AM »
You would just mount them near the front of the door where they point down when the door is up
2006 Cool named BIXABEL (BISH-AH-BEL) Mayan for "Good Roads"

DDM
StageIII intercooled Supercharger, Wisco ceramic coated pistons, Carrillo rods, superTech valves and Springs
Ported and polished head
Exedy Stage II Clutch
big brake kit, slotted/drilled Rotors w/Porterfield pads & blue juice
Backbone, Probeam, Cross Strut Brace
Underhood, trunk, & door Lights
ZOK suspension
Lambo Doors

JPM
Center console, door inserts, & dash
Seat bolster & lumbar support

Focuztech Tri-Y Header & hi-flow cat
Solo Performance SQR-2
Norm's Rear facia
Heated Seats
Black Cat inserts

Online Sol Asylum

  • Lifetime Supporting
  • Shop Foreman
  • *
  • Posts: 8684
  • Karma: +35/-63
  • Location: Tolono Illinois
  • THAT'S MISTER KAPPA ASSYLUM TO YOU!
Re: DDMWorks Puddle Lights
« Reply #15 on: February 03, 2015, 12:01:57 PM »

GJ I think we would have to install these on the front of Critter's doors to get them to work right.

2007 Aggressive GXP

Offline Critterman

  • Retired, thank you very much
  • Lifetime Supporting
  • General Manager
  • *
  • Posts: 12335
  • Karma: +17/-54
  • Baltimore/Washington Corridor
Re: DDMWorks Puddle Lights
« Reply #16 on: February 03, 2015, 07:36:24 PM »
I saw that but these guys don't know where my lights are mounted so they have no reference.
2006 Cool named BIXABEL (BISH-AH-BEL) Mayan for "Good Roads"

DDM
StageIII intercooled Supercharger, Wisco ceramic coated pistons, Carrillo rods, superTech valves and Springs
Ported and polished head
Exedy Stage II Clutch
big brake kit, slotted/drilled Rotors w/Porterfield pads & blue juice
Backbone, Probeam, Cross Strut Brace
Underhood, trunk, & door Lights
ZOK suspension
Lambo Doors

JPM
Center console, door inserts, & dash
Seat bolster & lumbar support

Focuztech Tri-Y Header & hi-flow cat
Solo Performance SQR-2
Norm's Rear facia
Heated Seats
Black Cat inserts

Offline Hoosier GXP

  • Lifetime Supporting
  • Master Tech
  • *
  • Posts: 136
  • Karma: +0/-1
  • Hoosier GXP
Re: DDMWorks Puddle Lights
« Reply #17 on: February 04, 2015, 10:33:26 AM »
How far out will the image project ? Just wondering if one could be mounted to shine on hood blanket and still retain a good image with the hood up.

 

Powered by EzPortal