Welcome Guest!!!

Thank you for visiting the GM Kappa Performance Forum. This forum is the only performance oriented forum for all GM Kappa Platform Enthusiasts.  We hope you will join and share your experiences.  Becoming a member is FREE! If you want to advertise on this forum, email KappaPerformance at yahoo.com.


Registration required to view the forum attachments. Below is a sample of the current top 25 topics.
Supporting Membership has many advantages.


More information on becoming a supporting member or vendor can be found on the sub forum; Site Help and Suggestions; thread - Supporting Members and Vendors.

Author Topic: Roll Bar with associated Panels  (Read 1263 times)

0 Members and 1 Guest are viewing this topic.

Offline Frank 2008

  • Tech
  • **
  • Posts: 15
  • Karma: +0/-1
  • Location: Ar
Roll Bar with associated Panels
« on: April 07, 2015, 11:33:35 AM »
I have removed the roll bar that was in my car when I bought it.  It mounts through the floor with three bolts on each side through a plate under the car, then a cross bar attaches through the rear glove box.  The back panel and the side panels were cut to allow the install.

I will sell the roll bar w/panels for $300.00 + shipping
 
This link will take you to a page where there is a photo of what the bar looks like installed, it's a third of the way down the page. ( it's not my car ) I have pictures of mine but don't know how to attach to this post.  If interested I can email them to you.
 
http://www.skyroadster.com/forums/f40/sky-rollbar-has-anyone-done-39620/index2.html

Offline DaveOC

  • Upgraded Member
  • Master Tech
  • *
  • Posts: 768
  • Karma: +3/-3
  • Location: SE Wisconsin
  • Running Wisconsin
Re: Roll Bar with associated Panels
« Reply #1 on: April 07, 2015, 11:56:30 AM »
Here you go.

Aggressive #000741

Offline Frank 2008

  • Tech
  • **
  • Posts: 15
  • Karma: +0/-1
  • Location: Ar
Re: Roll Bar with associated Panels
« Reply #2 on: April 07, 2015, 12:21:03 PM »
Thanks.   Frank

Offline Frank 2008

  • Tech
  • **
  • Posts: 15
  • Karma: +0/-1
  • Location: Ar
Re: Roll Bar with associated Panels
« Reply #3 on: April 08, 2015, 11:22:41 PM »
The roll bar has been sold, however I have four coil over shocks if your interested in lowering your car two inches.  I don't know how many miles are on them, they were on the car when I got it. They appear to be in good shape no leaks.  Asking 200.00

Offline Sting Ya

  • Premium Member
  • Master Tech
  • *
  • Posts: 311
  • Karma: +2/-2
  • Location: Columbia Station Ohio
Re: Roll Bar with associated Panels
« Reply #4 on: April 09, 2015, 09:32:36 AM »
Frank email me I'm interested in the coil overs / injoycars @aol.com

 

Powered by EzPortal