Welcome Guest!!!

Thank you for visiting the GM Kappa Performance Forum. This forum is the only performance oriented forum for all GM Kappa Platform Enthusiasts.  We hope you will join and share your experiences.  Becoming a member is FREE! If you want to advertise on this forum, email KappaPerformance at yahoo.com.


Registration required to view the forum attachments. Below is a sample of the current top 25 topics.
Supporting Membership has many advantages.


More information on becoming a supporting member or vendor can be found on the sub forum; Site Help and Suggestions; thread - Supporting Members and Vendors.

Author Topic: 2 codes keep popping up help p0558 and p0367  (Read 880 times)

0 Members and 1 Guest are viewing this topic.

Offline phillyphan08

  • Tech
  • **
  • Posts: 41
  • Karma: +0/-3
  • Location: Orlando, Florida
2 codes keep popping up help p0558 and p0367
« on: April 23, 2015, 02:56:51 AM »
i changed both sensors cam and brake booster pressure (2nd map)
all the wiring looks fine, battery has 12.6 volts and hasnt had any issues starting any suggestions? and i changed the crank sensor and looked at the wiring coming into the ecu.

P0558 - Brake Booster Pressure Sensor Circuit High Voltage

P0367 - Camshaft Position Sensor 'B' Circuit Low Bank 1



thanks
mike

Offline scanner

  • Master Tech
  • ***
  • Posts: 307
  • Karma: +0/-2
  • Location: Detroit, MI
Re: 2 codes keep popping up help p0558 and p0367
« Reply #1 on: April 25, 2015, 08:00:44 PM »
Have DVOM & Scantool?  These are needed to do a good investigation. DVOM is needed to test voltages and resistances, 10M Ohm input impedance minimum.  Scantool lets you see what the ECM "sees".

Clear Skies!
Scanner

Offline phillyphan08

  • Tech
  • **
  • Posts: 41
  • Karma: +0/-3
  • Location: Orlando, Florida
Re: 2 codes keep popping up help p0558 and p0367
« Reply #2 on: April 26, 2015, 02:49:52 PM »
i have a colt meter and my scan tool isnt too good

 

Powered by EzPortal