Welcome Guest!!!

Thank you for visiting the GM Kappa Performance Forum. This forum is the only performance oriented forum for all GM Kappa Platform Enthusiasts.  We hope you will join and share your experiences.  Becoming a member is FREE! If you want to advertise on this forum, email KappaPerformance at yahoo.com.

Registration required to view the forum attachments. Below is a sample of the current top 25 topics.
Supporting Membership has many advantages.

More information on becoming a supporting member or vendor can be found on the sub forum; Site Help and Suggestions; thread - Supporting Members and Vendors.

Author Topic: High RPM (5100+ RPMS) WOT Hesitation!!!!!  (Read 9713 times)

0 Members and 1 Guest are viewing this topic.

Offline MattM

  • Master Tech
  • ***
  • Posts: 383
  • Karma: +0/-0
  • Location: Mechanicsburg PA
Re: High RPM (5100+ RPMS) WOT Hesitation!!!!!
« Reply #75 on: August 22, 2019, 09:12:03 AM »
That knock retard number is measured by the ecu but it's the commanded measurement. The ignition cut is happening external to the ecu so the ecu cannot measure the ignition cut from the wot box.  I think the only way it would see the ignition cut in the measurements would be in the misfire measurements.  Now that I think about it...that would actually be the only way the ecu could measure an external ignition cut.

My though was that perhaps it's seeing the misfire and interpreting it as knock (thus triggering knock retard).


Powered by EzPortal