Author Topic: New Product - Custom Fuse Box Covers (Read 37383 times)

BeachParty · « **Reply #50 on:** February 24, 2010, 04:11:05 PM »

Thanks for your PM. I've got a cover ready for you! Check your PM's.

BeachParty · « **Reply #51 on:** February 24, 2010, 04:11:53 PM »

Quote from: GXP Fetish on February 23, 2010, 09:58:12 PM

Howdy,

I am ordering a fuze box cover for my Wicked and am wondering if your cover has the vinyl yellow color under the cover or did you use touch up paint?

BTW your cover looks great!

THX Betty Ann

Betty Ann,
I do believe that one you quoted above is vinyl.

GXPinKC · « **Reply #52 on:** February 25, 2010, 12:15:10 PM »

I ordered the Solstice GXP Custom Fuse Box Cover from Beach Party Custom Fuse Covers some time back and in combination with the MRZ Performance Billet Caps the engine compartment really looks awesome! It is a great additon at very reasonable cost.

GXP Fetish · « **Reply #53 on:** March 02, 2010, 09:17:54 AM »

I received my Fuse Box Cover yesterday and I'm excited about installing it. I'm leaning towards the idea of painting the factory cover before I install the custom cover instead of using the vinyl.

Any pro's or con's regarding vinyl verses paint?

IndyBob · « **Reply #54 on:** March 02, 2010, 07:18:07 PM »

Why doesn't their thread work on here ? Can't find their website either.

GXP Fetish · « **Reply #55 on:** March 02, 2010, 09:40:31 PM »

O

Quote from: IndyBob on March 02, 2010, 07:18:07 PM

Why doesn't their thread work on here ? Can't find their website either.

On the right hand side of the screen you will see Vendors. Click on Beach Party.

1LILNDN · « **Reply #56 on:** March 03, 2010, 12:08:51 AM »

GXP Fetish : My 1st cover was Painted to match Car .Then when I got my B/P cover I used the vinyl and it started coming loose. The Paint peeled off and was on the Back of the vinyl. Don't paint your cover. My 2nd Cover I made sure there was no paint on it. I installed my new cover and before removing any of the protective film cover I painted all the Detail to look like my Car.

Will try to locate Pic

<---- My 1st B/P cover to the right still have it

GXP Fetish · « **Reply #57 on:** March 03, 2010, 08:19:09 AM »

Ah,

Quote from: 1 LIL NDN on March 03, 2010, 12:08:51 AM

GXP Fetish : My 1st cover was Painted to match Car .Then when I got my B/P cover I used the vinyl and it started coming loose. The Paint peeled off and was on the Back of the vinyl. Don't paint your cover. My 2nd Cover I made sure there was no paint on it. I installed my new cover and before removing any of the protective film cover I painted all the Detail to look like my Car.

Will try to locate Pic

THX for the response! I'll follow your advise and post a picture!

1LILNDN · « **Reply #58 on:** March 03, 2010, 12:32:10 PM »

Beach Party Custom Fuse Covers
Beach Party Products - Custom Fuse Box Covers for the Kappa community - 949-632-8063

Quote from: IndyBob on March 02, 2010, 07:18:07 PM

Why doesn't their thread work on here ? Can't find their website either.

At the top of this Page on the left side click forum when the page comes up Scroll down to the vendors and click on that ,It will open to Vendors .Rite near the Top Click on BeachParty

elff · « **Reply #59 on:** March 03, 2010, 12:32:14 PM »

I've had no problems with my painted cover.
Looks exactly like it did when I finished the painting.

BeachParty · « **Reply #60 on:** March 03, 2010, 06:23:24 PM »

Thanks for chiming in guys!!!

BeachParty · « **Reply #61 on:** March 03, 2010, 06:24:10 PM »

Quote from: IndyBob on March 02, 2010, 07:18:07 PM

Why doesn't their thread work on here ? Can't find their website either.

I just sent you a PM. Fire away with any questions that you have!

NormSky · « **Reply #62 on:** March 07, 2010, 02:48:39 PM »

Do they make a cover that holds your toold while your working?

Norm

BeachParty · « **Reply #63 on:** March 07, 2010, 10:05:51 PM »

I can make one with a round circle to hold your "beverage of choice".

Does that count as a tool?

Sol Asylum · « **Reply #64 on:** March 07, 2010, 10:09:39 PM »

Maybe instead of a piece of aluminum or stainless steel you could make it out of some magnetic material. That way Norm could put his hardware there and not have to search for it under the car later.

BeachParty · « **Reply #65 on:** March 07, 2010, 10:14:02 PM »

Ouch!

Sol Asylum · « **Reply #66 on:** March 07, 2010, 10:23:47 PM »

It's not really a slam on Norm. Flat areas in engine compartments tend to be a place to lay tools and hardware while work is going on. I used to do it all the time until I started working on aircraft, then I realized the potential to leave a tool in an engine nacelle and the problems that could cause, I broke that habit pretty quickly. I have however found some real nice tools that people have left where they shouldn't have.

Houstice · « **Reply #67 on:** August 17, 2010, 05:12:17 AM »

I was trying to look at your photos but they are distorted. Is there anyway I can view your product?

Thanks

DeepBlueGXP · « **Reply #68 on:** August 17, 2010, 06:09:10 AM »

Pictures were corrupted in the host site transfer. Will try to get this corrected...

DeepBlueGXP · « **Reply #69 on:** August 17, 2010, 06:39:13 AM »

Found the files, fixed the first post...

Houstice · « **Reply #70 on:** August 17, 2010, 12:31:31 PM »

Thank You for fixing the photos. Very Nice!!

BeachParty · « **Reply #71 on:** August 17, 2010, 03:16:12 PM »

Thanks Joe. What a great Boss Man. Houston Solstice, let me know if you have any questions!

Brad Kenny · « **Reply #72 on:** August 18, 2010, 11:32:15 AM »

E-mail sent per post one.

Johnny-Longtorso · « **Reply #73 on:** March 21, 2011, 12:42:25 AM »

Bill - when posting to publicly accessible forums you should consider obfuscating your email address - at least something like "joe at domain dot com" - if you post your actual email and a spambot surfs this site you'll get a ton of spam.

And in a case like this you may be better served with a private message to BeachParty.

Cheers -
Don

Gentleman Jack · « **Reply #74 on:** March 21, 2011, 01:26:43 AM »

Quote from: Johnny-Longtorso on March 21, 2011, 12:42:25 AM

Bill - when posting to publicly accessible forums you should consider obfuscating your email address - at least something like "joe at domain dot com" - if you post your actual email and a spambot surfs this site you'll get a ton of spam.

And in a case like this you may be better served with a private message to BeachParty.

Cheers -
Don

This is great advice! Spam sucks!

News:

Welcome Guest!!!

Author Topic: New Product - Custom Fuse Box Covers (Read 37383 times)