Welcome Guest!!!

Thank you for visiting the GM Kappa Performance Forum. This forum is the only performance oriented forum for all GM Kappa Platform Enthusiasts.  We hope you will join and share your experiences.  Becoming a member is FREE! If you want to advertise on this forum, email KappaPerformance at yahoo.com.


Registration required to view the forum attachments. Below is a sample of the current top 25 topics.
Supporting Membership has many advantages.


More information on becoming a supporting member or vendor can be found on the sub forum; Site Help and Suggestions; thread - Supporting Members and Vendors.

Author Topic: DDMWorks - Southern Maryland Mod Meet 6 - Signup  (Read 11873 times)

0 Members and 1 Guest are viewing this topic.

Offline Dave@DDMworks

  • Vendor
  • Gearhead
  • *
  • Posts: 1044
  • Karma: +11/-0
  • Location: Greenville, South Carolina
    • DDMworks
DDMWorks - Southern Maryland Mod Meet 6 - Signup
« on: September 08, 2009, 03:24:17 PM »
Hello Everyone,

We will be coming up to the Maryland Mod Meet at Joe's and wanted to get together a schedule for the event so we know what to bring everyone, to make sure everyone gets what they want. If you are looking to have something installed or have question about times or installations, give us a call at 864-907-6004, email me at Dave@ddmworks.com or send me a private message.

Friday –

4:00 – Elff – R56 RIS Install, Alignment
5:00 – Morpheus – DDMworks Intercooler, DDMworks LNF Intake, “GXP” caliper

Saturday -
9:00 AM - Tailhooker - HKS Install
12:00 PM - Critterman - LED Underhood light, Trunk light, Door lights, under dash lights, white face gauges, LED lights behind gauges, DDMworks Center Feed Fuel Rail
3:00 PM - Elff - Race Backbone please and 1 R56 Race Intake
4:00 PM - Spikey - LED lights, front license plate mod.

Sunday –

Spartan – Brake Lines, Big Caliper Upgrade with R4-S pads, Rear R4-S pads
Tomato Soup – Backbone/Probeam install/T-bolt Clamp Kit

Stuff to bring for pickup -
2 engine bay lights for elf
2 sets of Portefield R4-S brake pads for Spikey and Morpheus
Dejon Intercooler for Spartan
Ate Brake fluid for Phil


Prices for install:
Install prices for the meet:

Supercharger kits - Stage 1 - $500, Stage 2 - $750, Stage 3 - $850
Pro-beams - $30
Backbones - $30
A-pillar pods - $10
Aeroforce gauges - $30
Valve covers - $35 (advance cores/ordering required)
Coilovers - $250
Shocks and springs - $250
Sway Bars - Front $60, both $75
DDMWorks Big Caliper upgrade and full brake bleed - $75
Intercooler - $160
Intake - $40
Trunk Light - $20
Hood light - $20
Fuel Rail - $40
Custom Work - Just ask
« Last Edit: October 07, 2009, 03:26:46 PM by Dave@DDMworks »
Dave Michel
DDMWorks
Sales - 864-438-4949
Tech Support - 864-907-6004

WWW.DDMworks.com
Dave@DDMWorks.com

Stage 3 Supercharged 2.4L - 314whp - 93 octane
Rotrex Supercharged 2.4L - 303whp - 93 octane
2871 Hybrid turbo 2.0L - 371whp - 93 octane

Offline Helios

  • Premium Member
  • Gearhead
  • *
  • Posts: 1286
  • Karma: +4/-3
  • Location: Charleston, SC
  • Play Hard; Drive Harder!
Re: DDM Works - Southern Maryland Mod Meet 6 - Signup
« Reply #1 on: September 08, 2009, 08:39:49 PM »
You didnt mention the fuel rail install price.   ????
"Gwyneth"
V8 swap in progress
RPi GT/ SOLO Exhaust

Offline Dave@DDMworks

  • Vendor
  • Gearhead
  • *
  • Posts: 1044
  • Karma: +11/-0
  • Location: Greenville, South Carolina
    • DDMworks
Re: DDM Works - Southern Maryland Mod Meet 6 - Signup
« Reply #2 on: September 08, 2009, 09:58:31 PM »
You didnt mention the fuel rail install price.   ????

Fixed for you :) Are you planning on making it up there?
Dave Michel
DDMWorks
Sales - 864-438-4949
Tech Support - 864-907-6004

WWW.DDMworks.com
Dave@DDMWorks.com

Stage 3 Supercharged 2.4L - 314whp - 93 octane
Rotrex Supercharged 2.4L - 303whp - 93 octane
2871 Hybrid turbo 2.0L - 371whp - 93 octane

Offline Helios

  • Premium Member
  • Gearhead
  • *
  • Posts: 1286
  • Karma: +4/-3
  • Location: Charleston, SC
  • Play Hard; Drive Harder!
Re: DDM Works - Southern Maryland Mod Meet 6 - Signup
« Reply #3 on: September 08, 2009, 11:20:49 PM »
Fixed for you :) Are you planning on making it up there?


I looked into it, but the Mod Meet is in October and i'll be back in full swing with my next project in GA. Work, work, work... No rest for the weary. I wish i coulda made it though. I was thinking of MAYBE getting a fuel rail when i went up to Greenville next week (i hope). Not sure if i really need it though. I've got a lot of things still to buy for the house and i'm not sure a fuel rail will fit into the budget.
"Gwyneth"
V8 swap in progress
RPi GT/ SOLO Exhaust

Offline Critterman

  • Retired, thank you very much
  • Premium Member
  • General Manager
  • *
  • Posts: 13571
  • Karma: +17/-58
  • Baltimore/Washington Corridor
Re: DDM Works - Southern Maryland Mod Meet 6 - Signup
« Reply #4 on: September 09, 2009, 08:42:42 AM »
Fuel rail ->->-> possible burnt piston

Decisions, decisions
GONE: (but not forgotten) 2006 Cool named BIXABEL (BISH-AH-BEL) Mayan for "Good Roads"

DDM
StageIII intercooled Supercharger, Wisco ceramic coated pistons, Carrillo rods, superTech valves and Springs
Ported and polished head
Exedy Stage II Clutch
big brake kit, slotted/drilled Rotors w/Porterfield pads & blue juice
Backbone, Probeam, Cross Strut Brace
Underhood, trunk, & door Lights
ZOK suspension

JPM
Center console, door inserts, & dash
Seat bolster & lumbar support

Focuztech Tri-Y Header & hi-flow cat
Solo Performance SQR-2
Norm's Rear facia
Heated Seats
Black Cat inserts

Offline elff

  • Premium Member
  • General Manager
  • *
  • Posts: 11381
  • Karma: +26/-58
  • Location: Keebler Tree House
Re: DDM Works - Southern Maryland Mod Meet 6 - Signup
« Reply #5 on: September 09, 2009, 11:24:10 AM »
Dave
Can you add 2 LED Cool White Engine Lights for me. I want to set mine up like Randy's
I'll be able to do the install myself.  

Thanks

Offline Dave@DDMworks

  • Vendor
  • Gearhead
  • *
  • Posts: 1044
  • Karma: +11/-0
  • Location: Greenville, South Carolina
    • DDMworks
Re: DDM Works - Southern Maryland Mod Meet 6 - Signup
« Reply #6 on: September 09, 2009, 11:41:20 AM »
Dave
Can you add 2 LED Cool White Engine Lights for me. I want to set mine up like Randy's
I'll be able to do the install myself. 

Thanks

Sure thing, added it to the list for you, thanks!
Dave Michel
DDMWorks
Sales - 864-438-4949
Tech Support - 864-907-6004

WWW.DDMworks.com
Dave@DDMWorks.com

Stage 3 Supercharged 2.4L - 314whp - 93 octane
Rotrex Supercharged 2.4L - 303whp - 93 octane
2871 Hybrid turbo 2.0L - 371whp - 93 octane

Offline spicy3480

  • Solo Performance Sales
  • Vendor
  • Gearhead
  • *
  • Posts: 2556
  • Karma: +1/-4
  • Location: New York
Re: DDM Works - Southern Maryland Mod Meet 6 - Signup
« Reply #7 on: September 09, 2009, 11:48:13 AM »
Dave,
Put me down for the trunk light and install.  Also, do you have a picture of the under hood lights?  I have Norm's hood so i don't know how you would hide it or if it would fit.

Also, Can you get me red lighting for under the driver and passenger by the feet and install it...maybe with a switch for one or all of the lights?

Lastly, can you get me the necessary upgraded sway bar that would be best for cornering and install it there?  I am not sure if it is the front or rear, and i have the GXP bars already.
Steve Mariano
Solo Performance
516-655-9002 (7 days a week, until midnight EST)
goingsolo2@hotmail.com


2007 Mysterious Solstice GXP
INTRUDER

Offline Dave@DDMworks

  • Vendor
  • Gearhead
  • *
  • Posts: 1044
  • Karma: +11/-0
  • Location: Greenville, South Carolina
    • DDMworks
Re: DDM Works - Southern Maryland Mod Meet 6 - Signup
« Reply #8 on: September 09, 2009, 12:00:54 PM »
Dave,
Put me down for the trunk light and install.  Also, do you have a picture of the under hood lights?  I have Norm's hood so i don't know how you would hide it or if it would fit.

Also, Can you get me red lighting for under the driver and passenger by the feet and install it...maybe with a switch for one or all of the lights?

Lastly, can you get me the necessary upgraded sway bar that would be best for cornering and install it there?  I am not sure if it is the front or rear, and i have the GXP bars already.

I just put up a couple pictures of the underhood lights, if you have a picture of the bottom of your hood I can give you a better idea if it will fit also. Of course if we bring them up and they do not fit with your hood, I am sure we will be able to install them on someone else's car, so let me know what color you want and we will bring some up for you. :)

We can do the under dash lights for you also, do you want them to come on when the door opens? and then a switch to turn them on also so when you are at shows?

No problem on the sway bar.

Thanks!
Dave Michel
DDMWorks
Sales - 864-438-4949
Tech Support - 864-907-6004

WWW.DDMworks.com
Dave@DDMWorks.com

Stage 3 Supercharged 2.4L - 314whp - 93 octane
Rotrex Supercharged 2.4L - 303whp - 93 octane
2871 Hybrid turbo 2.0L - 371whp - 93 octane

Offline elff

  • Premium Member
  • General Manager
  • *
  • Posts: 11381
  • Karma: +26/-58
  • Location: Keebler Tree House
Re: DDM Works - Southern Maryland Mod Meet 6 - Signup
« Reply #9 on: September 09, 2009, 12:22:03 PM »
Damn you and your light goodness

I just saw the trunk light mod.
Can you ALSO add that in the same color.

Note to self: Do not visit DDM Website between now and mod meet, Do not visit DDM Website between now and mod meet, Do not visit DDM Website between now and mod meet, Do not visit DDM Website between now and mod meet, Do not visit DDM Website between now and mod meet, Do not visit DDM Website between now and mod meet, Do not visit DDM Website between now and mod meet, Do not visit DDM Website between now and mod meet, Do not visit DDM Website between now and mod meet, Do not visit DDM Website between now and mod meet,
 :woohoo:

Offline spicy3480

  • Solo Performance Sales
  • Vendor
  • Gearhead
  • *
  • Posts: 2556
  • Karma: +1/-4
  • Location: New York
Re: DDM Works - Southern Maryland Mod Meet 6 - Signup
« Reply #10 on: September 09, 2009, 12:40:07 PM »
Elff I am with you.  I just ordered the trunk light, hood light, and under dash lights, along with a front ZOK sway bar LOL.  Looks like Xmas will be a bit smaller for me this year HA HA.
Steve Mariano
Solo Performance
516-655-9002 (7 days a week, until midnight EST)
goingsolo2@hotmail.com


2007 Mysterious Solstice GXP
INTRUDER

Offline Arabas

  • Premium Member
  • Gearhead
  • *
  • Posts: 3408
  • Karma: +1/-5
  • Location: Athens Greece
Re: DDM Works - Southern Maryland Mod Meet 6 - Signup
« Reply #11 on: September 09, 2009, 12:49:15 PM »
Kelu, let s go to this mode meet...do you think we can get there in time??????
you lucky guys...i want to go shopping too and have my mods done by real pros...
DDM Works Backbone and probeam
H&R springs
SOLO HF Cat and Mach Shorty
Dejon Throttle Elbow
Dejon-AEM intake
Front Big Brake upgrade kit with Ferodo pads
Trifecta tune
Custom IC and pipes
LVKFCB

Offline Kelu

  • Premium Member
  • Shop Foreman
  • *
  • Posts: 6197
  • Karma: +8/-28
  • Location: Romania, Europe
Re: DDM Works - Southern Maryland Mod Meet 6 - Signup
« Reply #12 on: September 09, 2009, 02:57:32 PM »
ok George, I'm sure we have plenty of time to get there.
You pay the tickets and I'm next to you  :cheers:

Stop tempting me, this is one of the things which I despretly want but I can't accomplish  :gaah:

BTW: you posted in the wrong topic  :)
Dragula  ;) Opel GT  from Romania
Arabas: take fotos, videos and keep all girls locked inside the house. Kelu's charm is irresistible !!!!

Offline Critterman

  • Retired, thank you very much
  • Premium Member
  • General Manager
  • *
  • Posts: 13571
  • Karma: +17/-58
  • Baltimore/Washington Corridor
Re: DDM Works - Southern Maryland Mod Meet 6 - Signup
« Reply #13 on: September 09, 2009, 03:29:55 PM »
Elf, At least you went to the web site, I just called Dave with a question and look where I ended up!
GONE: (but not forgotten) 2006 Cool named BIXABEL (BISH-AH-BEL) Mayan for "Good Roads"

DDM
StageIII intercooled Supercharger, Wisco ceramic coated pistons, Carrillo rods, superTech valves and Springs
Ported and polished head
Exedy Stage II Clutch
big brake kit, slotted/drilled Rotors w/Porterfield pads & blue juice
Backbone, Probeam, Cross Strut Brace
Underhood, trunk, & door Lights
ZOK suspension

JPM
Center console, door inserts, & dash
Seat bolster & lumbar support

Focuztech Tri-Y Header & hi-flow cat
Solo Performance SQR-2
Norm's Rear facia
Heated Seats
Black Cat inserts

Offline elff

  • Premium Member
  • General Manager
  • *
  • Posts: 11381
  • Karma: +26/-58
  • Location: Keebler Tree House
Re: DDMWorks - Southern Maryland Mod Meet 6 - Signup
« Reply #14 on: September 09, 2009, 06:54:06 PM »
It's bad enough that DDM offers us all this stuff we want because Dave can sell ice to Eskimos.

Offline kennysabarese

  • "The Professor"
  • Premium Member
  • Gearhead
  • *
  • Posts: 3809
  • Karma: +0/-5
  • Location: NJ
  • Make or take?
Re: DDMWorks - Southern Maryland Mod Meet 6 - Signup
« Reply #15 on: September 09, 2009, 07:43:18 PM »
What's the hourly rate for things like corner weighting and alignment. If I can afford coilvers after paying for my vacation I'm going to install them with a friend but we don't have corner weighting or alignment gear.
2007 Sky Redline - Wester's Tuned - GMPP sensors - RMR Roll Bar - Kirkey Seats
Schroth Harnesses - SSR Wheels - Dunlop Direzza Z1 Star Specs - Complete Mod List
kennysabarese.com - Photos - Facebook - Twitter - RSS

Offline Dave@DDMworks

  • Vendor
  • Gearhead
  • *
  • Posts: 1044
  • Karma: +11/-0
  • Location: Greenville, South Carolina
    • DDMworks
Re: DDMWorks - Southern Maryland Mod Meet 6 - Signup
« Reply #16 on: September 09, 2009, 08:06:22 PM »
It's bad enough that DDM offers us all this stuff we want because Dave can sell ice to Eskimos.

They like cold drinks also :)
Dave Michel
DDMWorks
Sales - 864-438-4949
Tech Support - 864-907-6004

WWW.DDMworks.com
Dave@DDMWorks.com

Stage 3 Supercharged 2.4L - 314whp - 93 octane
Rotrex Supercharged 2.4L - 303whp - 93 octane
2871 Hybrid turbo 2.0L - 371whp - 93 octane

Offline Dave@DDMworks

  • Vendor
  • Gearhead
  • *
  • Posts: 1044
  • Karma: +11/-0
  • Location: Greenville, South Carolina
    • DDMworks
Re: DDMWorks - Southern Maryland Mod Meet 6 - Signup
« Reply #17 on: September 09, 2009, 08:07:20 PM »
What's the hourly rate for things like corner weighting and alignment. If I can afford coilvers after paying for my vacation I'm going to install them with a friend but we don't have corner weighting or alignment gear.

$80 and hour, depending on what specs and what coilovers you are installing and also how far off it is, you are looking between 1-3 hours, typically 2 for most of the setups we do.
Dave Michel
DDMWorks
Sales - 864-438-4949
Tech Support - 864-907-6004

WWW.DDMworks.com
Dave@DDMWorks.com

Stage 3 Supercharged 2.4L - 314whp - 93 octane
Rotrex Supercharged 2.4L - 303whp - 93 octane
2871 Hybrid turbo 2.0L - 371whp - 93 octane

Offline spicy3480

  • Solo Performance Sales
  • Vendor
  • Gearhead
  • *
  • Posts: 2556
  • Karma: +1/-4
  • Location: New York
Re: DDMWorks - Southern Maryland Mod Meet 6 - Signup
« Reply #18 on: September 09, 2009, 08:08:56 PM »
Dave,
Don't forget to get me time on that list for the lighting and front sway bar install.

JPM already has me from 7am to noon on Saturday, but he is basically taking out a lot of the interior.
Steve Mariano
Solo Performance
516-655-9002 (7 days a week, until midnight EST)
goingsolo2@hotmail.com


2007 Mysterious Solstice GXP
INTRUDER

Offline elff

  • Premium Member
  • General Manager
  • *
  • Posts: 11381
  • Karma: +26/-58
  • Location: Keebler Tree House
Re: DDMWorks - Southern Maryland Mod Meet 6 - Signup
« Reply #19 on: September 10, 2009, 10:51:03 AM »
They like cold drinks also :)

That's why I'm bringing some of Pottsville's finest.

At $20/light count me in for letting you install both the hood and trunk lights.
Also
We will be arriving on friday between 1 and 2 pm.
You can bump us to that day if it helps out with people who can't make friday

And yes, I just saw your cai,  grrrrrrrrrrrrrr
I have to talk to you about that and my car.  I have some thoughts on my sky's 3 week timing for limp mode.

Offline TomatoSoup

  • Premium Member
  • Gearhead
  • *
  • Posts: 3359
  • Karma: +19/-13
  • Location: Gaithersburg, MD
Re: DDMWorks - Southern Maryland Mod Meet 6 - Signup
« Reply #20 on: September 11, 2009, 02:17:01 PM »
Per private email discussion, please ink me in for install of ProBeam and Backbone on Sunday afternoon (1pm slot if poss, or later).

Thanks!
"That is my theory, it is mine, and belongs to me and I own it, and what it is too." (Monty Python)

Offline tailhooker

  • Premium Member
  • Tech
  • *
  • Posts: 78
  • Karma: +1/-1
  • Location: Bethlehem , PA
Re: DDMWorks - Southern Maryland Mod Meet 6 - Signup
« Reply #21 on: September 15, 2009, 10:20:46 PM »
Dave/Randy:
   
     I am sending out a check for the HKS coilovers tomorrow (16 Sept).  When you install them on Sat, will I need an alignment to get back to PA from MD?
Thanks,
Todd Schrack aka Tailhooker

Offline Morfious

  • SMMM 7 Cup Stacking Champion
  • Upgraded Member
  • Master Tech
  • *
  • Posts: 298
  • Karma: +1/-1
  • Location: Morrisville, PA
  • Tryin' to keep the rubber side down since age 2
Re: DDMWorks - Southern Maryland Mod Meet 6 - Signup
« Reply #22 on: September 23, 2009, 12:13:34 AM »
Dave I'm good with everything we talked about.  Intercooler, pipes, and intake system.  I should be there friday afternoon.  Thanks for letting me spend my money on cool go faster parts.
Mean GXP Delivered 1/30/2007 $MSRP +$2K
Mods:
Pioneer AVIC D3 Nav System
Solo-Performance Street Race exhaust
Debadged
JPM interior (Doors, steering wheel, shifter, console now with 100% more Chuck Norris)
Custom dash and Flush mounted Valentine 1 Radar Detector
O.Z. Ultraleggera wheels with Dunlop DZ101
DDM Works (Big Brake Kit, backbone, intercooler, valve and coil cover)
GXP ZOK Rear sway bar



Offline spicy3480

  • Solo Performance Sales
  • Vendor
  • Gearhead
  • *
  • Posts: 2556
  • Karma: +1/-4
  • Location: New York
Re: DDMWorks - Southern Maryland Mod Meet 6 - Signup
« Reply #23 on: September 23, 2009, 08:31:54 AM »
Dave...I didn't see my name on the install list...are we still all set?
Steve Mariano
Solo Performance
516-655-9002 (7 days a week, until midnight EST)
goingsolo2@hotmail.com


2007 Mysterious Solstice GXP
INTRUDER

Offline nolanb

  • Premium Member
  • Tech
  • *
  • Posts: 57
  • Karma: +0/-0
  • Location: Hesston, PA
Re: DDMWorks - Southern Maryland Mod Meet 6 - Signup
« Reply #24 on: October 05, 2009, 11:13:29 PM »
Dave,

I didn't get around to ordering soon enough.  Could you bring with you a white hood light and a white trunk light for my Solstice?

Thanks
Bryan

 

Powered by EzPortal