Author Topic: LatinVenom Front Chassis Brace project (Read 83857 times)

LatinVenom · « **Reply #25 on:** October 05, 2010, 06:35:43 PM »

I have Air conditioning and there is absolutely no problems with this Front Chassis Brace.
This one is completely different from the Werks and the reason for the design.
With theirs you have to do a bit more than just bend the line.
Look at the pictures I posted, then look at Werks and you will see why mine does not need any adjustment to any part of the car.
It is a simple functional design for the purpose of tying the front chassis together, in a very solid way.

LatinVenom · « **Reply #26 on:** October 07, 2010, 07:06:22 PM »

UPDATE:
The new fabricator is on board and the price will be less than a $100.00.
The price above does NOT include shipping.
I am going to make 5 of the Latinvenom Kappa Front Chassis Brace.
They should be done by the last week of October.
If you want one of these put your name on the following list.

1. DeepBlueGXp
2. DeepblueGXP
3. Desk305
4. Marvic 1
5. I LIL NDN
6. Spartan
7. Go-N-Def
8. DRM
9. S.P.
10. U4EA

DeepBlueGXP · « **Reply #27 on:** October 07, 2010, 08:08:25 PM »

LV, put me down for two

Sly Bob · « **Reply #28 on:** October 07, 2010, 08:12:43 PM »

The beauty of this is you can use it in addition to one of the other braces on the market if you wish to do so.

HAMMER DOWN · « **Reply #29 on:** October 07, 2010, 08:17:48 PM »

I'll take one too.

Mike

GASNGO · « **Reply #30 on:** October 07, 2010, 08:33:16 PM »

LV, I would like to sign up for one of your Kappa front chassis braces.
GASNGO

1LILNDN · « **Reply #31 on:** October 07, 2010, 09:28:52 PM »

LatinVenom ; Put me down for 1 also how do I Pay and when ?UPDATE:
The new fabricator is on board and the price will be less than a $100.00 plus shipping.
I am going to make 5 of the Latinvenom Kappa Front Chassis Brace.
They should be done by the last week of October.

TomatoSoup · « **Reply #32 on:** October 07, 2010, 10:30:46 PM »

Me too please...

Gentleman Jack · « **Reply #33 on:** October 08, 2010, 12:52:11 AM »

Quote

If you want one of these put your name on the following list.

1.DeepBlueGXP, 20657
2.DeepBlueGXP
3.HAMMERDOWN
4.1 LIL NDN (Robert Preisinger) 21236
5.TomatoSoup (Mark Quinn) 20882

Well, that about does it. That was the fastest sell out in a long long time. Nice work LV!

GJ

kennysabarese · « **Reply #34 on:** October 08, 2010, 01:49:35 PM »

I anxiously await the review from you guys.

DRM · « **Reply #35 on:** October 08, 2010, 01:55:26 PM »

LV...Put me down on the list I guess for next time.

GXPinKC · « **Reply #36 on:** October 08, 2010, 03:11:05 PM »

Quote from: Kenny on October 08, 2010, 01:49:35 PM

I anxiously await the review from you guys.

Latin Venom, uh, my wife will kill me if I order anything else! Looking forward to the review!

LatinVenom · « **Reply #37 on:** October 08, 2010, 03:43:45 PM »

Folks,
Since we seem to have more people than the Braces that are schedule to be made, let me see if the fabricator wants to make 10.
The reason for the 5 was because the fabricator wanted to make sure the price we agreed on, could be sustain once he went automated.
I posted the names base on the times people posted and or PM me.

LatinVenom · « **Reply #38 on:** October 08, 2010, 03:50:34 PM »

Quote from: Sly Bob on October 07, 2010, 08:12:43 PM

The beauty of this is you can use it in addition to one of the other braces on the market if you wish to do so.

You can not use the LatinVenom Kappa Front Chassis Brace with the one from WerksAutomotive.
Also once you folks have this product, then it will be the time for a discussion about this product vs the others.
All I am going to say for now is just look at the bare Chassis picture I posted...........

S.P. · « **Reply #39 on:** October 08, 2010, 04:01:12 PM »

LV,

If the fabricator agrees to 10 I'd like the tenth spot!

GXPinKC · « **Reply #40 on:** October 08, 2010, 04:14:19 PM »

Uh, I am thinking...better not approach my wife with another upgrade until the dust settles! I will see how many more hop on it! Thanks Latin Venom!

kennysabarese · « **Reply #41 on:** October 08, 2010, 04:24:55 PM »

Quote from: LatinVenom on October 08, 2010, 03:50:34 PM

You can not use the LatinVenom Kappa Front Chassis Brace with the one from WerksAutomotive.

It can be used with the DDM brace, they serve different purposes.

TomatoSoup · « **Reply #42 on:** October 08, 2010, 05:04:30 PM »

Quote from: Kenny on October 08, 2010, 04:24:55 PM

It can be used with the DDM brace, they serve different purposes.

Yep - that's why I want one. The combination will bring a whole new meaning to the term "roll hoop".

GXPinKC · « **Reply #43 on:** October 08, 2010, 05:15:13 PM »

Latin Venom, Miss Red Eagle had the Race Backbone and Probeam installed by DDMWorks at the Denver NASSM along with the Martin Tune. The difference was immediate in suspension improvement with the DDMWorks Race Backbone and Probeam. Bob, (snaponbob), will be installing our DDMWorks Red Cross Bay Brace along with the P/S relocation Kit probably some time this next week, as it depends on his schedule and when he can allow time to do the install. He has promised a "Blood Free" install, although as mentioned by Critter, if blood were spilled it would match the Red DDMWorks Cross Bay Brace! How convenient!!! I hope I don't jinx Bob by mentioning it! Man, Critter, you come up with some beaut's!

Maybe this is two much with the additions. Possibly it would be better to drive Miss Red Eagle after Bob has installed the Red DDMWorks Cross Bay Brace and see how the ride is changed! Then maybe pull the trigger latter on the Latin Venom Front Chassis Brace or braces?

Now, if I decide to hop on this offer, for two of the Latin Venom Front Chassis Braces, will this possibly be "overkill" and make the ride to firm?? Any input would be welcome.

GXPinKC
Ron

Sly Bob · « **Reply #44 on:** October 08, 2010, 08:01:12 PM »

Quote from: Kenny on October 08, 2010, 04:24:55 PM

It can be used with the DDM brace, they serve different purposes.

That was the brace that I was talking about when I said that it would work with other braces.

LatinVenom · « **Reply #45 on:** October 09, 2010, 08:17:07 PM »

Just to clarify the issue with the possible 10 Braces.
I will not know until the 15th of this month.
I will talk that day with the fabricator and see if I can convince him to make 10.
On the 15th is when he will show me the final fabrication for my inspection and fitting.
If everything is a go, then I can ask him if he would make an additional 5.
Also as always, I do not want your money until I have the parts on hand.
You can use PAYPAL but you need to pay the fee's.
You can always send me a Money order, this way you can avoid the PAYPAL fees.
The brace will be mail using Fedex Ground.
One last thing, the LatinVenom Kappa Front Chassis Brace is ONLY for a GXP Solstice or SKY/RL with a 2.0 LNF motor.
I have no way at this time to know if it will fit a 2.4 NA car.
Thanks

LatinVenom · « **Reply #46 on:** October 09, 2010, 08:40:41 PM »

At this time I really do not want to get into a discussion of the different chassis braces.
Honestly, when I decided to designed this brace with the input of some friends, it was to be a one of.
I am going to let you all be the judge once you get the Brace and install it.
For now please let's not go there.
Thanks.

kennysabarese · « **Reply #47 on:** October 09, 2010, 08:47:28 PM »

PayPal clarification. They've reorganized PayPal which gives you two main categories to send money: "Purchase" and "Personal"

Any of the choices under "Purchase" require a fee. By paying this fee you get protection if screwed.

Any of the choices under "Personal" have no fee, but you are not protected.

Also you can pay with PayPal using your credit card for either type Personal or Purchase, but there is a separate fee for that.

So you can use PayPal without a fee.

1LILNDN · « **Reply #48 on:** October 09, 2010, 11:27:38 PM »

Grrrrr 8 I've got my auto timer counting downto the 15th Also have my fingers crossed for the (10) Unit Make .

HAMMER DOWN · « **Reply #49 on:** October 10, 2010, 07:12:13 AM »

The 15th,

Well just hope that Benjamin don't burn a hole in my pocket & go some where else

Mike

News:

Welcome Guest!!!

Author Topic: LatinVenom Front Chassis Brace project (Read 83857 times)