glad you fixed it numba41 !
did u by any chance take any fotos of the procedure?
No pictures. The part is a whole unit remove and replace and really simple. It's just there isn't much room to pull the part away from the steering column so removal of dash bolts and trim had to be done. See the process below from alldatadiy.
Removal:
1. Remove the steering column trim covers.
2. Disconnect the multifunction turn signal switch harness connector.
3. Depress the locking tabs and remove the multifunction turn signal switch from the steering column.
Installation:
1. Install the multifunction turn signal switch to the steering column. Ensure the locking tabs are snapped into place.
2. Connect the multifunction turn signal switch harness connector.
3. Install the steering column trim covers.