Author Topic: The best performance mod ever... DDM Works Center Console (Read 45371 times)

DeepBlueGXP · « **Reply #25 on:** January 17, 2011, 09:59:51 AM »

from the looks of that right seat, he needs cup-holders.

Critterman · « **Reply #26 on:** January 17, 2011, 10:01:39 AM »

Quote from: LatinVenom on January 16, 2011, 08:20:03 PM

The problem is justifying this after you had JPM upgrade your original center console.
It looks good though.

Exactly, this would be my 4th one, running out of excuses/reasons

1LILNDN · « **Reply #27 on:** January 17, 2011, 10:17:31 AM »

Quote from: DeepBlueGXP on January 17, 2011, 09:59:51 AM

from the looks of that right seat, he needs cup-holders.

Now !!! They have to work on making a shorter E-Brake handle to put 1 or 2 on the right side also .then do away with that stupid Plastic Chit

Dave , Randy Time to get Crackin on this Mod .

" Just Sit Right Down AND Start All Over Again." You Gotta Have Faith in the Builder of GR8 Products

melissadunagan · « **Reply #28 on:** January 17, 2011, 02:20:22 PM »

If you go with this one the one in the water fall that opens on its own should be limitated. But far me I think on hole or just one hole would suit me better. And it does need a soft place to rest your elbow on.

smartin · « **Reply #29 on:** January 17, 2011, 02:54:13 PM »

I think it's awesome. And karma is being very good to me since I haven't placed my center console order.

JimVonBaden · « **Reply #30 on:** January 17, 2011, 04:25:25 PM »

Quote from: smartin on January 17, 2011, 02:54:13 PM

I think it's awesome. And karma is being very good to me since I haven't placed my center console order.

Same here, I was a few keystrokes away from ordering one. Now I am going to wait.

Jim

tallcraig · « **Reply #31 on:** January 17, 2011, 05:51:20 PM »

Last Nov. Dave told me he had this in the works but my elbow demanded that I get the JPM treatment. Owning a 2009 with one cup holder is a PITA ! Nice work by DDM ! My Kingdom for a waterfall cupholder ...

Graywolf · « **Reply #32 on:** January 17, 2011, 09:58:48 PM »

I like the idea,but I would also have the option for those disgusting people like myself to make one holder an ash tray.

spider · « **Reply #33 on:** January 18, 2011, 12:23:05 AM »

Quite the misleading tittle there, but it made me look. Cool, now I could spill five drinks in my 2 seater?

Arabas · « **Reply #34 on:** January 18, 2011, 03:16:26 AM »

Quote from: Graywolf on January 17, 2011, 09:58:48 PM

I like the idea,but I would also have the option for those disgusting people like myself to make one holder an ash tray.

Helios · « **Reply #35 on:** January 18, 2011, 10:01:57 AM »

Looks great! Stainless steel inserts look best, IMO.

smartin · « **Reply #36 on:** January 18, 2011, 10:14:57 AM »

Quote from: spider on January 18, 2011, 12:23:05 AM

Quite the misleading tittle there, but it made me look. Cool, now I could spill five drinks in my 2 seater?

That's what I was thinking.

pocketcthulhu · « **Reply #37 on:** January 18, 2011, 01:39:18 PM »

Considering how i put my elbow on the edge to shift my weight when getting in/out (and might have developed cracks due to this

) I am Loving this for a number of reasons

When can I order one?

DickW · « **Reply #38 on:** January 18, 2011, 04:57:10 PM »

Dave What would the approximate cost to pad and cover it?

Go-N Def · « **Reply #39 on:** January 18, 2011, 09:54:51 PM »

I'm renting a Charger while I'm here in San Diego. It has a double cup holder turned 90 degrees to your design. What I like about it is that they're connected in the middle and it has a ring of light around them recessed into the cup holder itself...
Food for thought.....

DeepBlueGXP · « **Reply #40 on:** January 18, 2011, 10:40:39 PM »

Get some pics

JimVonBaden · « **Reply #41 on:** January 18, 2011, 10:57:39 PM »

Quote from: Go-N Def on January 18, 2011, 09:54:51 PM

I'm renting a Charger while I'm here in San Diego. It has a double cup holder turned 90 degrees to your design. What I like about it is that they're connected in the middle and it has a ring of light around them recessed into the cup holder itself...

Food for thought.....

I'm not sure you could turn them 90°, but I have an idea, if Dave will let me know if we can get them with no holes in them???

Jim

Go-N Def · « **Reply #42 on:** January 18, 2011, 11:16:22 PM »

Quote from: JimVonBaden on January 18, 2011, 10:57:39 PM

I'm not sure you could turn them 90°, but I have an idea, if Dave will let me know if we can get them with no holes in them???

Jim

Read my quote again, I wasn't saying that I like the 90° turn. That wouldn't be feasible to have two drinks and still rest your arm there.

Go-N Def · « **Reply #43 on:** January 18, 2011, 11:38:00 PM »

From the Charger:

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]

Before you comment on these pictures, READ POST #40 ABOVE!!!!!

JimVonBaden · « **Reply #44 on:** January 18, 2011, 11:48:05 PM »

Quote from: Go-N Def on January 18, 2011, 11:16:22 PM

Read my quote again, I wasn't saying that I like the 90° turn. That wouldn't be feasible to have two drinks and still rest your arm there.

Ok, I see what you mean. My idea is similar to that. My Caliber had the same lighting scheme.

I intend to make the hole still fit the two cup holders, lit, and have a wider connection between the two cup holders molded in so I can use it to hold a wide variety of items with the cup holders in, one in, or none in.

Jim

DickW · « **Reply #45 on:** January 19, 2011, 09:12:08 AM »

If you made it like that for the Sol, you couldn't use it for an arm rest

JimVonBaden · « **Reply #46 on:** January 19, 2011, 09:49:35 AM »

Quote from: DickW on January 19, 2011, 09:12:08 AM

If you made it like that for the Sol, you couldn't use it for an arm rest

Who are you not quoting for that answer?

Jim

kennysabarese · « **Reply #47 on:** January 19, 2011, 10:58:02 AM »

I was thinking that this cupholder thing without the cupholders could be used as a cool place to put some additional electronics. Such as buttons or knobs for audio or performance equipment (meth nitro etc). Is there a way to buy it raw without the holes cut like the way you have it in the pics where you are standing on it?

Brad Kenny · « **Reply #48 on:** January 19, 2011, 11:49:15 AM »

Quote from: Kenny on January 19, 2011, 10:58:02 AM

I was thinking that this cupholder thing without the cupholders could be used as a cool place to put some additional electronics. Such as buttons or knobs for audio or performance equipment (meth nitro etc). Is there a way to buy it raw without the holes cut like the way you have it in the pics where you are standing on it?

Or just one hole near the middle, using the rest of the spare space for extra equipment...

Good idea Kenny!!!

Critterman · « **Reply #49 on:** January 19, 2011, 02:49:18 PM »

Quote from: JPM on January 16, 2011, 11:28:49 PM

Looks cool guys. For those wondering, I don't think this will be able to be covered without A LOT of seam work and fitting.

That just means it is going to cost a little more to get it covered - right Joe?

News:

Welcome Guest!!!

Author Topic: The best performance mod ever... DDM Works Center Console (Read 45371 times)