Author Topic: LatinVenom Front Chassis Brace project 4th order (Read 11367 times)

DeepBlueGXP · « **on:** March 25, 2011, 07:34:22 AM »

Split from http://www.kappaperformance.com/forum/index.php/topic,5760.0.html

LatinVenom · « **Reply #1 on:** March 25, 2011, 05:06:41 PM »

LatinVenom Front Chassis Brace project 4th order By: LatinVenom Date: March 23, 2011, 05:13:33 PM
Quote from: LatinVenom on March 13, 2011, 08:31:15 PM
4th Batch of LV Kappa Front Chassis Brace

Updated List Powder Coat Shipped date.

1. Ed999 Silver 5/28/2011
2. Marc Carbon Flash RED 6/01/2011
3. Rich71 Silver 5/31/2011
4. LRuch Silver 5/31/2011
5. Gregory RED 5/28/2011
6. Spedee RED 5/28/2011
7. G8TR Silver 6/4/2011
8. Kuprito Silver 6/8/2011
9. Yps Silver 5/31/2011
10. Californiadreaming RED 6/3/2011

5th Batch of LV Kappa Front Chassis Brace
11. RLDoug Silver
12. LLLLFLY Black
13. Spicy3480 Black
14. Hubert Silver

Thank you.

Prices:
RAW no paint or powder coating $95.00 plus shipping.
Silver or Black $95.00 + $5.00(Powder coating)=$100.00 plus shipping
RED $95.00 + $15.00 (Powder coating)=$110.00 plus shipping

More information about what the fuss is all about can be found here.
http://www.kappaperformance.com/forum/index.php?topic=5206.0
http://www.kappaperformance.com/forum/index.php/topic,5602.0.html
http://www.kappaperformance.com/forum/index.php/topic,5760.0.html

Gregory · « **Reply #2 on:** April 03, 2011, 11:17:53 AM »

I want one too! I'd prefer a red one

LatinVenom · « **Reply #3 on:** April 03, 2011, 08:51:34 PM »

OK Gregory I will put you on the list.
I am assuming you have seen the one Arabas just got.

Gregory · « **Reply #4 on:** April 04, 2011, 02:57:47 AM »

Quote from: LatinVenom on April 03, 2011, 08:51:34 PM

OK Gregory I will put you on the list.
I am assuming you have seen the one Arabas just got.

I have not seen it yet but we spoke and he left me a good feedback so I am considering that a combination of this and a backbone and a probeam will give the car a lot

LatinVenom · « **Reply #5 on:** April 20, 2011, 06:34:25 PM »

I know is a sticky but we seem to be close to the 10 orders I need to get this batch done.
Lets see if we have a couple of more folks that want to commit to one.

G8TR · « **Reply #6 on:** April 20, 2011, 06:47:28 PM »

I will take one in silver LV.

LatinVenom · « **Reply #7 on:** April 20, 2011, 06:48:54 PM »

Thanks G8TR, I will put you on the list.

scoobyless · « **Reply #8 on:** April 20, 2011, 06:51:01 PM »

I went through the threads but didn't see it posted, I was wondering if you knew the specs on the tubing used. Thanks!

Randy

LatinVenom · « **Reply #9 on:** April 20, 2011, 06:56:14 PM »

I believe it was in the 1st thread.
Founded. is post 110 on the 1st thread.
The LVKFCB is a hallow 1" steel tubing with a weight of about 5 lbs.

scoobyless · « **Reply #10 on:** April 20, 2011, 07:52:41 PM »

Quote from: LatinVenom on April 20, 2011, 06:56:14 PM

I believe it was in the 1st thread.
Founded. is post 110 on the 1st thread.
The LVKFCB is a hallow 1" steel tubing with a weight of about 5 lbs.

Any idea on the wall thickness of the tubing?

LatinVenom · « **Reply #11 on:** April 21, 2011, 06:25:25 PM »

A little over a 1/4"

Spedee · « **Reply #12 on:** May 03, 2011, 03:53:50 PM »

Quote from: LatinVenom on March 23, 2011, 05:13:33 PM

Just posting for all the new people to see. Would be nice to get this full so we all can get our braces

LatinVenom · « **Reply #13 on:** May 18, 2011, 03:57:05 PM »

TO ALL!!!

Rather than wait for 2 more members I had the fabricator make the 10 LVKFCB.
I am picking them up today and then it will be going to the powder coater tomorrow.
There will be 3 RED and 7 SILVER unless someone else that is not on the list # 8 and 9 want to get added to the list and want a different color.

LatinVenom · « **Reply #14 on:** May 19, 2011, 06:59:19 PM »

NEW UPDATE!!!

The powder coater is very busy at this time and cannot do the work for a week.
They are at their shop and hopefuly it will be sooner.
As always no payment is required until the product is in my hands.
I will PM everyone with the info about Payment and shipping.
Thanks

Yps · « **Reply #15 on:** May 20, 2011, 12:10:52 AM »

LV,
thank you for putting me on the list

rich71 · « **Reply #16 on:** May 20, 2011, 09:26:20 AM »

excellent

Spedee · « **Reply #17 on:** May 20, 2011, 03:52:43 PM »

Awesome. Can't wait to try this out.

1LILNDN · « **Reply #18 on:** May 20, 2011, 11:06:22 PM »

Spedee You will like it .Fits good and adds looks to the lower end.

CaliforniaDreamin · « **Reply #19 on:** May 21, 2011, 02:43:59 AM »

Quote from: LatinVenom on May 19, 2011, 06:59:19 PM

NEW UPDATE!!!

The powder coater is very busy at this time and cannot do the work for a week.
They are at their shop and hopefuly it will be sooner.
As always no payment is required until the product is in my hands.
I will PM everyone with the info about Payment and shipping.
Thanks

LV, sent PM.

Marc's Carbon Flash · « **Reply #20 on:** May 21, 2011, 10:11:48 AM »

Sweet, I have a ProBeam, OCC AND LVFCB to install. Glad I'm off this weekend.

LatinVenom · « **Reply #21 on:** May 28, 2011, 10:19:45 AM »

UPDATE:

I have posted shipping dates for those who have already paid.
Please go to post number 1 to see it.

spicy3480 · « **Reply #22 on:** May 31, 2011, 10:53:00 AM »

LV, I would like one in black powdercoat. PM me and let me know what you need.

LatinVenom · « **Reply #23 on:** May 31, 2011, 02:10:03 PM »

Quote from: spicy3480 on May 31, 2011, 10:53:00 AM

LV, I would like one in black powdercoat. PM me and let me know what you need.

Spicy:
I will put you on the list for the 5th production cycle.
No need to do anything until I have 10 members signed up.
At that point the fabricator builds them and then the powder coater gets them.
We have 3 people so far for the 5th batch.

spicy3480 · « **Reply #24 on:** May 31, 2011, 02:53:53 PM »

OK sounds good...c'mon people get on this!!!

News:

Welcome Guest!!!

Author Topic: LatinVenom Front Chassis Brace project 4th order (Read 11367 times)

Yps