Topic: LatinVenom Front Chassis Brace project 5th order

[Sly Bob]

The silver would almost look as though it came from the factory like that unless you chose to get a black or red one. To order, a post in this thread is sufficient.

Prices:
RAW no paint or powder coating $95.00 plus shipping.
Silver or Black $95.00 + $5.00(Powder coating)=$100.00 plus shipping
         RED $95.00 + $15.00 (Powder coating)=$110.00 plus shipping

[Gentleman Jack]

If you can swing all three, great. If not, I would say any order is fine, but they seem to have a 1+1+1=5 effect.

I went one step at a time and each has it's benefits, but all together, wow. A different car.

[miller11386]

Ill probably pull the trigger on one if it still fits after my build. With my new hardware and plumbing, I am not sure if I will have the room to get it in.

[Gentleman Jack]

Miller,
You will be part of the 23rd order if you wait for your car to be done

[critter]

The silver would almost look as though it came from the factory like that unless you chose to get a black or red one. To order, a post in this thread is sufficient.

Prices:
RAW no paint or powder coating $95.00 plus shipping.
Silver or Black $95.00 + $5.00(Powder coating)=$100.00 plus shipping
         RED $95.00 + $15.00 (Powder coating)=$110.00 plus shipping

I am assuming that these aren't visible so silver seems to make the most sense to me. Are the other pieces available in silver as well or should I change to black if the others are not in silver? Catching up is so hard to do...Another thing - does this come with install guidance or is it pretty much obvious how/where this gets put in and how...

[Sly Bob]

The other parts are under the car and can't be seen without getting on you hands and knees. The LattonVenom brace can be seen when you open the hood and the silver would look sharp under there but as you said, you can't see a lot of it under there.

[miller11386]

Miller,
You will be part of the 23rd order if you wait for your car to be done

then itll be a good idea to save that cash for a while

[ihawk95]

I saw Wartie's install and I've been tempted for awhile now.  I'll wait for some other things to get done first in Asheville and then probably will post about ordering.

[Dave@DDMworks]

Like Critterman said though, if you are considering LV's brace you had better order it soon as it may not be available much longer. Once everyone gets one and he can no longer get a group of 10 people together to order from his supplier, there will be no more.

That is not the case anymore

More details to come later today

[miller11386]

sounds like someone just made an agreement

[Arabas]

sounds like someone just made an agreement

heard a rumor that DDM offered a $1M contract to Alvaro

way to go DDM for being so open minded !! not a very common thing nowdays...

[Sly Bob]

way to go DDM for being so open minded !! not a very common thing nowdays...

But then again DDM isn't like most vendors. Looking forward to the big announcement. Kudos to you Dave for putting this together and of course to LatinVenon for inventing the bar in the first place. It's simple to install yet very effective.

[critter]

heard a rumor that DDM offered a $1M contract to Alvaro

way to go DDM for being so open minded !! not a very common thing nowdays...

It will be interesting to see whether the prices go up as a result of this. I would rather wait for an order and have the quality and price. What happens to those in the loop right now? Are we in purgatory until the lawyers get their pound of flesh?

[ihawk95]

I'm guessing there will be deals or the price will be the same.

Dammit, I know I'm gonna buy this!
Red please!

[Sly Bob]

We'll know the details later today.

[Dave@DDMworks]

It will be interesting to see whether the prices go up as a result of this. I would rather wait for an order and have the quality and price. What happens to those in the loop right now? Are we in purgatory until the lawyers get their pound of flesh?

I will get some more details later today, but the prices are kinda going up and kinda going down.

The raw will still be $95, the red, black and silver will be $105. All parts will now be laser cut also More details later, I have a bunch of emails to get through this morning

[critter]

I will get some more details later today, but the prices are kinda going up and kinda going down.

The raw will still be $95, the red, black and silver will be $105. All parts will now be laser cut also More details later, I have a bunch of emails to get through this morning

What ever happened to the Grand Opening Sale or New Product Celebration Sale? Come on - be nice....

[Dave@DDMworks]

What ever happened to the Grand Opening Sale or New Product Celebration Sale? Come on - be nice....

Your beginning to sound more and more like the other critter

Also we agreed to keep the name LVKFCB, so we are thinking since we are making it, the name should be DDM-LVKFCB and since this is technically the second version we are thinking that DDM-LVKFCB-VII sounds really nice

[critter]

Your beginning to sound more and more like the other critter

And your point is what? As far as I am concerned this is a proud moment - this name seems to have developed a persona over time and I aspire to live up to it within this forum. This place is fun!!!! Now, about that Grand Opening SAle....LOL (sort of)

[miller11386]

(snip)....More details later, I have a bunch of emails to get through this morning

About 40 of those are from me

[Dave@DDMworks]

About 40 of those are from me

Yours don't even make up a tenth of what I have to get through this morning

[Critterman]

Nice of you Dave not to tell Miller you have a rule set up on his email, and be gentle with the new critter he is still learning, but learning fast and has come up with a very good suggestion   

[Sol Asylum]

... about that Grand Opening SAle....LOL (sort of)

Well he is starting to type like you except it's spelled correctly.

@DDM Dave the VII for version 2 looks like roman numerals for the number 7 so you may want to change that.

[miller11386]

Here is a video recreation of the doctor this morning (starting at 2:10 in):

Bruce Almighty (7/9) Movie CLIP - Bruce Answers Prayers (2003) HD

[Sly Bob]

@DDM Dave the VII for version 2 looks like roman numerals for the number 7 so you may want to change that.

Yeah I was thinkin' the same thing about the roman numerals.