Author Topic: Fender Well Trim Kit - DDMWorks (Read 6208 times)

Dave@DDMworks · « **on:** November 04, 2011, 11:27:30 AM »

We are happy to introduce our fender well trim kit for the Solstice/Sky/Opel GT. We have been installing these on customer cars for a couple years when they come to the shop, and since everyone has liked them we now have them for sale up on the website.

What we have found is that there is a slight gap between the plastic fender and the hood when the hood is closed, and what the kit does is fills this void in. By doing this it really helps keep road debris and dirt out of the engine bay to help it stay cleaner.

The kit consists of plenty of molding to go along both plastic fenders on the front of the car. The bulb molding is the same that is used by several OEM and has metal clips inside of it to make sure it grips really well to the plastic liners and doesn't pull off easy. Total for the kit is just $20 plus shipping and can be ordered by giving us a call or placing the order online below:

Solstice - Fender Well Trim Kit

Sky/Opel GT - Fender Well Trim Kit

Let me know if you have any questions.
Thanks,
Dave

Critterman · « **Reply #1 on:** November 04, 2011, 02:04:06 PM »

Sweet talk him when you are down there getting your clutch put in.

Dave@DDMworks · « **Reply #2 on:** November 04, 2011, 02:18:52 PM »

Quote from: BlackSunShine on November 04, 2011, 11:37:41 AM

Can you include a side view of what it looks like?

Sure I can show you exactly what it looks like on Saturday, I have our breakfast order ready also

1LILNDN · « **Reply #3 on:** November 04, 2011, 09:44:35 PM »

Quote from: BlackSunShine on November 04, 2011, 11:37:41 AM

Can you include a side view of what it looks like?

With the HOOD DOWN from the Side Please

Critterman · « **Reply #4 on:** November 05, 2011, 07:12:09 PM »

You can't see them with the hood down. All of us Joe's garage guys have them. they do not show

1LILNDN · « **Reply #5 on:** November 05, 2011, 07:34:34 PM »

Thanks John thats what i wanted to know . I ordered them

JimmyBaja · « **Reply #6 on:** November 06, 2011, 06:01:02 PM »

I'll have a side order of those please when I come down for "the built motor". Thanks

Treeman · « **Reply #7 on:** November 07, 2011, 01:20:06 PM »

Just ordered mine!

elff · « **Reply #8 on:** November 07, 2011, 04:30:51 PM »

What above a combo package
Fenders plus these. Mine are cracked, so I need the fenders before I put something like this on the old crappy ones

Excelsior · « **Reply #9 on:** November 07, 2011, 06:45:34 PM »

You need to make sure you have those for the next MMM please. Just in case I have a new car then.

Dave@DDMworks · « **Reply #10 on:** November 08, 2011, 11:52:45 AM »

Quote from: Excelsior on November 07, 2011, 06:45:34 PM

You need to make sure you have those for the next MMM please. Just in case I have a new car then.

I am sure we will bringing a bunch of them to the meets from now on, and thanks everyone for the orders!

Critterman · « **Reply #11 on:** November 08, 2011, 02:13:52 PM »

Bring a catch can to Joe's next year, I may be needing it. Not sure where we are going to put it, my power steering reservoir is there.

Dave@DDMworks · « **Reply #12 on:** November 08, 2011, 02:21:18 PM »

Quote from: Critterman on November 08, 2011, 02:13:52 PM

Bring a catch can to Joe's next year, I may be needing it. Not sure where we are going to put it, my power steering reservoir is there.

Since when? Did you do a different power steering reservoir then what comes in the supercharger kit?

Sol Asylum · « **Reply #13 on:** November 08, 2011, 02:30:16 PM »

Quote from: Dave@DDMworks on November 08, 2011, 02:21:18 PM

Since when? Did you do a different power steering reservoir then what comes in the supercharger kit?

GJ and I didn't change anything there in Critters car so unless Joe did something I doubt Critter supervised anyone else changing the reservoir.

Critterman · « **Reply #14 on:** November 08, 2011, 02:50:02 PM »

Nope the same place it has always been back in the right hand corner over the battery. Isn't that where you are putting the catch cans?

PS> I have not seen any oil in my tubes, and I have them changed regularly

Helios · « **Reply #15 on:** November 08, 2011, 02:51:41 PM »

Quote from: Critterman on November 08, 2011, 02:50:02 PM

Nope the same place it has always been back in the right hand corner over the battery. Isn't that where you are putting the catch cans?

PS> I have not seen any oil in my tubes, and I have them changed regularly

No, Critter. The OCC is installed on the left side of the battery.

1LILNDN · « **Reply #16 on:** November 10, 2011, 12:39:51 AM »

Mine is located next to the fuse box near the the T/C cover

1LILNDN · « **Reply #17 on:** November 10, 2011, 01:22:41 AM »

Dave@DDMworks ; Dave , Thank Kim for the Quick shipment .Will be installing them on Thursday after work . They were on my step when I got home from work . Bobby

MARVIC 1 · « **Reply #18 on:** November 10, 2011, 01:37:02 AM »

I thank DDMWorks for a super fast delivery of my 2 sets of Fender Well Trim Kits.
Now if I could get the documentation for the install of my new DDMWorks Intercooler all would be fine...

TecSolOnt · « **Reply #19 on:** November 10, 2011, 03:23:58 PM »

Put them on today, fit very nice. Now if I only drove it in bad weather I could test them out , sunny days are the rule though

Treeman · « **Reply #20 on:** November 12, 2011, 05:39:33 PM »

Put mine on today. Because of the way the lip on the liner is cut and that the trim strips were curled the opposite way of the liner, it was a bear to get on. I found it easy to put on upside down - and that opened the groove in the trim strips a bit and relaxed the curl. They went on the right way a lot easier after that.

News:

Welcome Guest!!!

Author Topic: Fender Well Trim Kit - DDMWorks (Read 6208 times)