After a bunch of discussions with the R&D side at Energy Suspension it seems fairly clear that the front and rear control arm bushing sets WILL fit ALL of the Kappas. At some point they will populate the kits with split bushings instead of one piece style. However, at this point they do NOT have bushings for the sway bars. Some cautions when you order this stuff;
1) If you own a Sol or Sky WITH the torque arm, don't bother with the master kit as you will paying for a diff bushing that is not needed. Instant paper weight.
2) If you order ANY kits make SURE that the seller has verified that the kit contains EIGHT metal sleeves in both the front ahd rear control arm sets. If only four each don't bother as it's an old stock kit and you will have to machine six of the eight lower control arm sleeves (if you have the FE3 suspension).
3) READ THE INSTRUCTIONS as a few pieces are reused.
4) Make this thing (6" threaded stock with nuts and washers, 8" is better) to insert the bushings --
I used an OTC ball joint press kit for extraction.
5) Not sure, but it appears that E.S. is the only producer of a poly bushing kit for Kappas.
6) A couple of the advertisers on this site do sell these kits.
Questions will be answered $1 per word from questioner. You'll need to send the cash through the little wires when you press ENTER.
