Welcome Guest!!!

Thank you for visiting the GM Kappa Performance Forum. This forum is the only performance oriented forum for all GM Kappa Platform Enthusiasts.  We hope you will join and share your experiences.  Becoming a member is FREE! If you want to advertise on this forum, email KappaPerformance at yahoo.com.


Registration required to view the forum attachments. Below is a sample of the current top 25 topics.
Supporting Membership has many advantages.


More information on becoming a supporting member or vendor can be found on the sub forum; Site Help and Suggestions; thread - Supporting Members and Vendors.

Author Topic: Somebody needs to make rear lowering springs!!!  (Read 7760 times)

0 Members and 1 Guest are viewing this topic.

Offline ebrown0104

  • Tech
  • **
  • Posts: 70
  • Karma: +0/-1
  • Location: Jeannette, PA
Somebody needs to make rear lowering springs!!!
« on: July 13, 2013, 04:36:45 PM »
I think that you could make a killing off of a set of lowering springs for the rear of these cars.  Somewhere between 1/2-3/4", same spring rates as stock.  I like where the front of my car sits, but the back is just a tad too high.  I don't wanna do Z0K springs because they're stiffer and stiffer rear springs=crash into a tree, plus my car is on the verge of being uncomfortable on these garbage PA roads anyway.

Just a thought.

Offline elff

  • Premium Member
  • General Manager
  • *
  • Posts: 11395
  • Karma: +26/-58
  • Location: Keebler Tree House
Re: Somebody needs to make rear lowering springs!!!
« Reply #1 on: July 13, 2013, 07:56:07 PM »
I live in PA and have ZOK springs.  They are far from too stiff and will not cause you to crash.
They lower the car the perfect amount

Offline MomsSol

  • Premium Member
  • Gearhead
  • *
  • Posts: 1189
  • Karma: +4/-11
  • Location: In the back room!
Re: Somebody needs to make rear lowering springs!!!
« Reply #2 on: July 13, 2013, 10:44:00 PM »
If the ZOK springs = crash then why did the GM suspension engineers make them specifically for the Autocross and Road Race cars?  :drive:
Just here to help a friend! :thumbs:
True Lady Gearhead :)
We'll Miss You PONTIAC! :cryin:


Offline LatinVenom

  • Premium Member
  • Gearhead
  • *
  • Posts: 3062
  • Karma: +7/-5
  • Location: South Florida
Re: Somebody needs to make rear lowering springs!!!
« Reply #3 on: July 14, 2013, 04:19:51 PM »
And the car with those springs won in 2007 and 2008 T2 SCCA.
I have them also and have no issues with them either.
Solstice GXP 2007.
Aggressive and fully loaded.
Mods: Magnaflow 2.5" exhaust, DDM Backbone & ProBeam,ZOK suspension,LV Kappa Front Chassis Brace, BTF Turbo Upgraded Wheel, Windristrictor, JPM Center console,arms,tulip,side doors,DDM Upgraded wheel tune.

Offline ophidia31

  • Master Tech
  • ***
  • Posts: 569
  • Karma: +0/-2
Re: Somebody needs to make rear lowering springs!!!
« Reply #4 on: July 14, 2013, 08:19:39 PM »
What car do you have? If you have a redline/gxp, you can get a complete le5 zok and shocks drop in set on ebay for under $400. Thats where i got mine from. The spring rate on the le5 zok springs is the same as the stock redline/gxp springs only a little bit lower. The lnf zok springs are stiffer than the redline/gxp springs.

But like you and elff, I too drive on shitty pa roads and have no problems if i watch where im driving with the le5 zok springs. I think the srping rate of these ones is too soft though. I found that out when i scraped the air damn on a 15mph bank turn that i at took at 45mph that showed how much they compressed. I will eventually be upgrading to the lnf zoks or even some bc coilovers with custom springs.

But this is how my car sits with the zok springs. The lnf zok would be about the same height. Was only about 1/2" lower than stock.

2013 Grigio Abarth 500

Offline TomatoSoup

  • Premium Member
  • Gearhead
  • *
  • Posts: 3363
  • Karma: +19/-13
  • Location: Gaithersburg, MD
Re: Somebody needs to make rear lowering springs!!!
« Reply #5 on: July 14, 2013, 11:26:44 PM »
The responses seem to be missing the fact that the OP wants to ONLY change the rear springs. Maybe why he said he was worried about a handling change with rear Z0Ks only.
"That is my theory, it is mine, and belongs to me and I own it, and what it is too." (Monty Python)

Offline elff

  • Premium Member
  • General Manager
  • *
  • Posts: 11395
  • Karma: +26/-58
  • Location: Keebler Tree House
Re: Somebody needs to make rear lowering springs!!!
« Reply #6 on: July 14, 2013, 11:31:43 PM »
There are reasons for the stance of the car.
Keep all 4 properly matched

Offline Sol Asylum

  • Premium Member
  • General Manager
  • *
  • Posts: 10354
  • Karma: +40/-66
  • Location: Tolono Illinois
  • THAT'S MISTER KAPPA ASSYLUM TO YOU!
Re: Somebody needs to make rear lowering springs!!!
« Reply #7 on: July 15, 2013, 12:43:20 AM »
There are reasons for the stance of the car.
Keep all 4 properly matched

Changing the stance will change the weight balance which will really change how the car handles.
2007 Aggressive GXP

Offline ebrown0104

  • Tech
  • **
  • Posts: 70
  • Karma: +0/-1
  • Location: Jeannette, PA
Re: Somebody needs to make rear lowering springs!!!
« Reply #8 on: July 15, 2013, 09:30:06 AM »
I was kinda sorta joking about the crashing into a tree part, but ideally I don't want to put stiffer springs on the back of a RWD car and not change the fronts since I'm assuming that will induce oversteer much easier.  Though, I always assumed that the LE5 Z0K was the same as the LNF FE3, but now that I'm looking at part numbers apparently they are different.  Thanks, ophidia31, I may get a set of LE5 Z0K rear springs since they are the same rate as the FE3, but hopefully a little shorter.

SPRING. Rear Spring
SPRING,RR(USE FOR 3250N LOAD SPRING). Required: 02
For: M 2.4-B/P(LE5),SPORT SUSP(FE3),SPORT PKG(Z0K) (2007-2010) (2007 - 2010).
For: M SPORT SUSP(FE3) (2006-2006) (2006 - 2006).    $57.26    15906532

Offline GXP_Matt

  • Tech
  • **
  • Posts: 93
  • Karma: +1/-3
  • Location: Asheville, NC
Re: Somebody needs to make rear lowering springs!!!
« Reply #9 on: July 15, 2013, 10:20:15 AM »
You can disconnect your rear sway bar and add the rear Z0k springs if you are really paranoid about oversteer.  Please note even with the stiffer rear springs you will not notice any handling changes unless you are at the limit of the tires sliding the car around.  It's always funny when people make conclusions about understeer/oversteer balance by taking an on-ramp sort of quickly...
2007 zero option GXP, SCCA A-Street
Full LNF Z0k conversion, Koni Yellows, Solo Race, SSR wheels, BF Goodrich Rivals in 245/40-18

2013 North Carolina Street Tire class champion

Offline ophidia31

  • Master Tech
  • ***
  • Posts: 569
  • Karma: +0/-2
Re: Somebody needs to make rear lowering springs!!!
« Reply #10 on: July 15, 2013, 11:33:09 AM »
You can disconnect your rear sway bar and add the rear Z0k springs if you are really paranoid about oversteer.  Please note even with the stiffer rear springs you will not notice any handling changes unless you are at the limit of the tires sliding the car around.  It's always funny when people make conclusions about understeer/oversteer balance by taking an on-ramp sort of quickly...

Yeah, the car is pretty neutral in 90% of driving conditions. The car has only gotten away from me once due to gravel/cinders on the road turning at a light during the winter time but the esc saved that one and only saw understeer a couple of times really pushing it through turns on the back road and had to back off.
2013 Grigio Abarth 500

Offline Critterman

  • Retired, thank you very much
  • Premium Member
  • General Manager
  • *
  • Posts: 13602
  • Karma: +17/-58
  • Baltimore/Washington Corridor
Re: Somebody needs to make rear lowering springs!!!
« Reply #11 on: July 15, 2013, 11:39:11 AM »
Know anyone interested in an HKS suspension?  I'm switching over to an LFN or LFN ZOK suspension.  My wife doesn't enjoy the stiff ride.
GONE: (but not forgotten) 2006 Cool named BIXABEL (BISH-AH-BEL) Mayan for "Good Roads"

DDM
StageIII intercooled Supercharger, Wisco ceramic coated pistons, Carrillo rods, superTech valves and Springs
Ported and polished head
Exedy Stage II Clutch
big brake kit, slotted/drilled Rotors w/Porterfield pads & blue juice
Backbone, Probeam, Cross Strut Brace
Underhood, trunk, & door Lights
ZOK suspension

JPM
Center console, door inserts, & dash
Seat bolster & lumbar support

Focuztech Tri-Y Header & hi-flow cat
Solo Performance SQR-2
Norm's Rear facia
Heated Seats
Black Cat inserts

Offline Sol Asylum

  • Premium Member
  • General Manager
  • *
  • Posts: 10354
  • Karma: +40/-66
  • Location: Tolono Illinois
  • THAT'S MISTER KAPPA ASSYLUM TO YOU!
Re: Somebody needs to make rear lowering springs!!!
« Reply #12 on: July 15, 2013, 01:05:40 PM »
Know anyone interested in an HKS suspension?  I'm switching over to an LFN or LFN ZOK suspension.  My wife doesn't enjoy the stiff ride.

Now you're just bragging.
2007 Aggressive GXP

Offline SHiNY

  • Faster than Slowest Romanian
  • Premium Member
  • Gearhead
  • *
  • Posts: 4450
  • Karma: +11/-47
  • Location: Long Island, NY
  • Every Cloud has a Silver Lining
Re: Somebody needs to make rear lowering springs!!!
« Reply #13 on: July 15, 2013, 01:10:52 PM »
Know anyone interested in an HKS suspension?  I'm switching over to an LFN or LFN ZOK suspension.  My wife doesn't enjoy the stiff ride.

Give her my number, I'll set her straight ;)

Offline Sol Asylum

  • Premium Member
  • General Manager
  • *
  • Posts: 10354
  • Karma: +40/-66
  • Location: Tolono Illinois
  • THAT'S MISTER KAPPA ASSYLUM TO YOU!
Re: Somebody needs to make rear lowering springs!!!
« Reply #14 on: July 15, 2013, 01:15:22 PM »
You would think at his age that wouldn't even be an issue.
2007 Aggressive GXP

Offline elff

  • Premium Member
  • General Manager
  • *
  • Posts: 11395
  • Karma: +26/-58
  • Location: Keebler Tree House
Re: Somebody needs to make rear lowering springs!!!
« Reply #15 on: July 15, 2013, 02:26:59 PM »
Is LNFZOK the medical part # for Viagra?

Offline JoshMcMadMac

  • Master Tech
  • ***
  • Posts: 323
  • Karma: +1/-2
  • Location: Waynesboro, PA
Re: Somebody needs to make rear lowering springs!!!
« Reply #16 on: July 15, 2013, 03:48:57 PM »
Know anyone interested in an HKS suspension?  I'm switching over to an LFN or LFN ZOK suspension.  My wife doesn't enjoy the stiff ride.
If you are serious, send me the details.

Offline Gentleman Jack

  • Chief Financial Officer, Color Professional
  • Premium Member
  • Shop Foreman
  • *
  • Posts: 8991
  • Karma: +25/-82
  • Location: Unknown
  • I'm here. If I wasn't here, I'd be there.
Re: Somebody needs to make rear lowering springs!!!
« Reply #17 on: July 15, 2013, 05:13:45 PM »
LFN????

Make the right choices now

Offline Critterman

  • Retired, thank you very much
  • Premium Member
  • General Manager
  • *
  • Posts: 13602
  • Karma: +17/-58
  • Baltimore/Washington Corridor
Re: Somebody needs to make rear lowering springs!!!
« Reply #18 on: July 15, 2013, 05:50:21 PM »
LFN????



whatever they call that POS with the turbo.  I need to soften my suspension as I don't autocross any more.  I am looking to replace it and sell what I have.
GONE: (but not forgotten) 2006 Cool named BIXABEL (BISH-AH-BEL) Mayan for "Good Roads"

DDM
StageIII intercooled Supercharger, Wisco ceramic coated pistons, Carrillo rods, superTech valves and Springs
Ported and polished head
Exedy Stage II Clutch
big brake kit, slotted/drilled Rotors w/Porterfield pads & blue juice
Backbone, Probeam, Cross Strut Brace
Underhood, trunk, & door Lights
ZOK suspension

JPM
Center console, door inserts, & dash
Seat bolster & lumbar support

Focuztech Tri-Y Header & hi-flow cat
Solo Performance SQR-2
Norm's Rear facia
Heated Seats
Black Cat inserts

Offline Gentleman Jack

  • Chief Financial Officer, Color Professional
  • Premium Member
  • Shop Foreman
  • *
  • Posts: 8991
  • Karma: +25/-82
  • Location: Unknown
  • I'm here. If I wasn't here, I'd be there.
Re: Somebody needs to make rear lowering springs!!!
« Reply #19 on: July 15, 2013, 06:50:17 PM »
Seriously thou Critterman, in all the Kappas I've been in or driven, the LNFZoK is my favorite setup. Best combination of handling, comfort etc.
Make the right choices now

Offline Critterman

  • Retired, thank you very much
  • Premium Member
  • General Manager
  • *
  • Posts: 13602
  • Karma: +17/-58
  • Baltimore/Washington Corridor
Re: Somebody needs to make rear lowering springs!!!
« Reply #20 on: July 16, 2013, 12:00:17 AM »
That is why I am looking in that direction. 
GONE: (but not forgotten) 2006 Cool named BIXABEL (BISH-AH-BEL) Mayan for "Good Roads"

DDM
StageIII intercooled Supercharger, Wisco ceramic coated pistons, Carrillo rods, superTech valves and Springs
Ported and polished head
Exedy Stage II Clutch
big brake kit, slotted/drilled Rotors w/Porterfield pads & blue juice
Backbone, Probeam, Cross Strut Brace
Underhood, trunk, & door Lights
ZOK suspension

JPM
Center console, door inserts, & dash
Seat bolster & lumbar support

Focuztech Tri-Y Header & hi-flow cat
Solo Performance SQR-2
Norm's Rear facia
Heated Seats
Black Cat inserts

Offline Gentleman Jack

  • Chief Financial Officer, Color Professional
  • Premium Member
  • Shop Foreman
  • *
  • Posts: 8991
  • Karma: +25/-82
  • Location: Unknown
  • I'm here. If I wasn't here, I'd be there.
Re: Somebody needs to make rear lowering springs!!!
« Reply #21 on: July 16, 2013, 02:45:33 AM »
That is why I am looking in that direction.

You are finally realizing my brilliance.
Make the right choices now

Offline Sol Asylum

  • Premium Member
  • General Manager
  • *
  • Posts: 10354
  • Karma: +40/-66
  • Location: Tolono Illinois
  • THAT'S MISTER KAPPA ASSYLUM TO YOU!
Re: Somebody needs to make rear lowering springs!!!
« Reply #22 on: July 16, 2013, 11:02:02 AM »
You are finally realizing my brilliance.

Little optimistic there don't you think?
2007 Aggressive GXP

Offline Gentleman Jack

  • Chief Financial Officer, Color Professional
  • Premium Member
  • Shop Foreman
  • *
  • Posts: 8991
  • Karma: +25/-82
  • Location: Unknown
  • I'm here. If I wasn't here, I'd be there.
Re: Somebody needs to make rear lowering springs!!!
« Reply #23 on: July 16, 2013, 01:26:48 PM »
Little optimistic there don't you think?

I'm a glass half full kinda guy
Make the right choices now

Offline Sol Asylum

  • Premium Member
  • General Manager
  • *
  • Posts: 10354
  • Karma: +40/-66
  • Location: Tolono Illinois
  • THAT'S MISTER KAPPA ASSYLUM TO YOU!
Re: Somebody needs to make rear lowering springs!!!
« Reply #24 on: July 16, 2013, 01:49:34 PM »
The glass is always full, half is water (or whatever) and the other half is air two halves = full.
2007 Aggressive GXP

 

Powered by EzPortal