Topic: Help? Anyone with a 2008/2009 wiring diagram?

[TomatoSoup]

I'm looking for where the signal for the remote door lock receiver signal wire enters the BCM.  I looked at the 2006 wiring diagram and that shows the signal enters the BCM at connector C2, pin 12 (Tan/white wire).  But when I looked in my 2008 GXP, there is no wire at that pin location on C2!  Hmmph!

I want to trace it to see if that signal is usable as an indicator of a locked/alarmed car, so that I can use it to trigger an interior radar motion sensor.  (Plus others may want to use it as an input to the Auto-Window controller I posted about.)

Thanks for any info.

EDIT: This is the diagram I had... but as I said, there is no wire at pin 12 on C2 (on my car)
[ Guests cannot view attachments ] :

[TomatoSoup]

No-one?  OK I guess I'll have to try the BB 

[DeepBlueGXP]

I have the 07 DVD, nothing else!

[Sly Bob]

This file is different from the one that you posted above. Although I can not verify it's accuracy, my source states that it's from the 2008 model GXP.

[TomatoSoup]

Thanks Bob! 

Darn it, though, that shows the receiver is now connected to the GMLan rather than an explicit level output.  Guess I have to ditch that idea.  Bummer.