Author Topic: OFFICIAL "2nd" Group Buy on Billet Engine Bay Covers from MRZ Performance (Read 79309 times)

Chemist · « **Reply #25 on:** May 05, 2009, 08:28:11 PM »

OK, I'm already on the list, but I'm confirming a set, red anodized, stock emblems engraved.

G8TR · « **Reply #26 on:** May 05, 2009, 10:10:56 PM »

When we're ready I'd like a set in blue anodized, stock emblems. I also hope that the gas caps will be ready by then so I can get the full set at one time.

dstaylor · « **Reply #27 on:** May 06, 2009, 12:59:30 AM »

id like to see a picture of it installed and to know how much it is

Sol Asylum · « **Reply #28 on:** May 06, 2009, 01:19:06 AM »

Since this is now an official group buy why don't the moderators move this to the supporting vender's section? It just seems like the right place for it.

DeepBlueGXP · « **Reply #29 on:** May 06, 2009, 06:53:29 AM »

done!!!

Chemist · « **Reply #30 on:** May 06, 2009, 09:24:39 AM »

Quote from: dstaylor on May 06, 2009, 12:59:30 AM

id like to see a picture of it installed and to know how much it is

Look here ==> http://kappaperformance.com/forum/index.php?topic=727.0

MRZ - Performance · « **Reply #31 on:** May 06, 2009, 01:44:34 PM »

good to see we already have 10 people for the group buy, do you guys want :

- to aim the 20+ people and wait for more people to get in to get 15% discount?

or

- go ahead right now with the group buy at -10% discount?

keep us posted about it and we'll do what you prefer

Thanks to everyone!

GXPinKC · « **Reply #32 on:** May 06, 2009, 07:05:58 PM »

I believe we can get 20 people and the 15% discount would be nice. Look how long it took to get twenty on the first Group Buy. My dad always told me "patience is a virtue". I vote to wait.

G8TR · « **Reply #33 on:** May 06, 2009, 09:33:03 PM »

Give the people some time to see this and get their money together if they want them.

Healix · « **Reply #34 on:** May 07, 2009, 01:51:05 AM »

Heyyyyyyyy! Just ran across this thread! I'm in too. Polished with stock emblems please. What do I need to do next?

GXPinKC · « **Reply #35 on:** May 07, 2009, 06:53:18 AM »

Quote from: Healix on May 07, 2009, 01:51:05 AM

Heyyyyyyyy! Just ran across this thread! I'm in too. Polished with stock emblems please. What do I need to do next?

You need to wait just a bit longer Healix, because we are now at 11 committed on this second group buy. Heyyyyyyyy, I love your enthusiasm! That is what forums are all about. Stop the presses, hold for the late edition, I think we have a winner here folks. I can't wait to see your fourth post!!!!!!!!!

Healix from the great state of Texas, I do hope you are going to the Nationals in Denver, because I definitely want to meet you in person, and see your 2006 Deep NA Solstice . We all look forward to your 3rd post. Most sincerely,
GXPinKC
Ron

P.S.--We are now up to 11 committed, nine to go for the second discount. Way to go Kappa Performance. com members. The ride just keeps getting better.

MRZ - Performance · « **Reply #36 on:** May 07, 2009, 09:37:21 AM »

Okay, we'll wait to see if we can get the 20 people...

agentsky · « **Reply #37 on:** May 07, 2009, 11:36:35 PM »

I am in, #12. Red anodized with stock emblems.

chuckdoc · « **Reply #38 on:** May 08, 2009, 06:45:39 AM »

Chemist, you will love them. Biggest draw back is now I clean my engine bay when I wash my car. I have never cleaned an engine and this is ridiculous. Everytime I open the bonnet (thats for my British friend "da wife of Critterman") I love the look. I had my intercooler tubes powdercoated red and with the red billet covers, (what the heck is a billet anyway) and the engine cover painted red, it looks great.

lil goat · « **Reply #39 on:** May 08, 2009, 07:09:06 AM »

Billet means cut from a block of aluminum as opposed to cast, the term is used very "loosely" these days but that is what it means, these look to be true billet.

Just for you Chuck, particle board would be cast, hand carved from a block of wood would be billet.

GXPinKC · « **Reply #40 on:** May 08, 2009, 01:55:33 PM »

agentsky has been added as number 12. Thanks agentsky for joining the 2nd Group Buy. We are now at 12, need 8 more to complete this Group Buy. We are on the way, and I cannot wait for the final 8 to sign on. I am getting anxious to see my new Billet Engine Bay Covers under the hood from MRZ Performance. Bring it!!!!!!!!!!!!!!

Sol Asylum · « **Reply #41 on:** May 08, 2009, 08:34:07 PM »

Quote from: lil goat on May 08, 2009, 07:09:06 AM

Billet means cut from a block of aluminum as opposed to cast, the term is used very "loosely" these days but that is what it means, these look to be true billet.

Just for you Chuck, particle board would be cast, hand carved from a block of wood would be billet.

Would it still be Billet if they cut it off a block of cast aluminum?

chuckdoc · « **Reply #42 on:** May 09, 2009, 06:40:27 AM »

thanks jim, I got it now. So we are billets, Frankenstein was not

Ben L · « **Reply #43 on:** May 09, 2009, 04:01:29 PM »

Related subject -- How are the gascaps coming??

GXPinKC · « **Reply #44 on:** May 09, 2009, 04:22:38 PM »

This is a quote from MRZ Performance on the first group buy order. "All shipping made thru Canada Post/UPS with no custom fees, we ship as a gift." Since nothing else has come forth from MRZ Performance, I am confident that the same policy would apply.

Thanks for the question Ben L.

G8TR · « **Reply #45 on:** May 09, 2009, 06:20:21 PM »

Quote from: Ben L on May 09, 2009, 04:01:29 PM

Related subject -- How are the gascaps coming??

I was wondering the same thing. Any chance we can order both at the same time?

G8TR · « **Reply #46 on:** May 12, 2009, 08:32:59 PM »

Let's bump this back up to the top so we can let our newer members see it.

Chemist · « **Reply #47 on:** May 12, 2009, 08:40:06 PM »

I bumped the 1st group buy thread over on the big board.

Smoky Mt Sky · « **Reply #48 on:** May 12, 2009, 11:37:55 PM »

Fellers, I am s-t-o-k-e-d!!!!!!! Put me down as Lucky 13 for a set of blue anodized with stock emblems to add on my Feb delivered 09 Sky RL.
Thanks.
Smoky Mt Sky

Midlife Crisis · « **Reply #49 on:** May 12, 2009, 11:46:25 PM »

Quote from: Gryphon on May 12, 2009, 08:32:59 PM

Let's bump this back up to the top so we can let our newer members see it.

Thanks for teasing me!

I would LOVE to get in on this, but I've been out of work since Oct 1, and since I found the forums I've been buying whatever I think I can *afford* for the sol and since I plan on attending Denver, I'm going to have to pass on this one... Maybe next time!

I was offered a new job today, but it doesn't start until June 1. I'll work 2 weeks, head to Denver and while I'm there, my first paycheck will be direct deposited.. then I'll get back and work a week and then receive a 3% raise... it's a city job and they get their annual raises then!

I think I'm gonna like this!

News:

Author Topic: OFFICIAL "2nd" Group Buy on ** Billet Engine Bay Covers ** from MRZ Performance (Read 79309 times)

lil goat

Ben L

Author Topic: OFFICIAL "2nd" Group Buy on Billet Engine Bay Covers from MRZ Performance (Read 79309 times)