Author Topic: BOV Install Possible?? (Read 9335 times)

spicy3480 · « **on:** February 06, 2010, 11:51:41 PM »

Dave and Randy,
I really want the sound of an aftermarkey BOV in my car. I love the Synapse Synchronic BOV, and I was wondering if you could make it work with the IC pipes you installed in my car. Is there a blow-through mode that will work and not cause any engine instability or stuttering?

Steve

lil goat · « **Reply #1 on:** February 08, 2010, 10:53:01 AM »

Steve you need to leave that Black pariah alone, if it is running don't mess with, it gets mad every time you do and you know it.

spicy3480 · « **Reply #2 on:** February 08, 2010, 11:32:09 AM »

Quote from: The Comedian on February 08, 2010, 10:53:01 AM

Steve you need to leave that Black pariah alone, if it is running don't mess with, it gets mad every time you do and you know it.

LOL that's kinda true, but at that point nobody had a solution for a BOV. I saw a video online of a Solstice with one and he said it runs perfectly. Possibly Dave and Rady have figured out how to run one without an issue?

Kuprito · « **Reply #3 on:** February 08, 2010, 12:08:58 PM »

The only way is with a Blow thru MAF.

spicy3480 · « **Reply #4 on:** February 08, 2010, 01:34:38 PM »

Is there one available for this car?

Kuprito · « **Reply #5 on:** February 08, 2010, 03:32:37 PM »

Just move the MAF element to the cold side pipe, before the BOV of course, and modify the MAF Frequency table to get the proper LTFT and STFT.

spicy3480 · « **Reply #6 on:** February 08, 2010, 03:56:14 PM »

I'm sure Lyndon could do this for me in order to have the BOV work. Dave and Randy could relocate the MAF for me. I hope they chime in here and tell me if it is worth it.

shabby · « **Reply #7 on:** February 08, 2010, 05:18:18 PM »

You need to get yourself the shabby pipe from btf, its 3" in diameter and has a flange for the maf and bov.
Tuning it is pretty straight forward but to get the fuel trims in spec it takes a while.

Kelu · « **Reply #8 on:** February 08, 2010, 06:06:41 PM »

Hold on gents, Spicy is trying to achieve this:

http://www.youtube.com/watch?v=VbNxugO-uf0

Grab the popcorn and let's watch this

spicy3480 · « **Reply #9 on:** February 08, 2010, 06:08:51 PM »

HA HA HA OMG if the car sounds like that, I am selling it LOL

BigSal · « **Reply #10 on:** February 08, 2010, 08:31:39 PM »

I almost choked on the apple I was eating....

1LILNDN · « **Reply #11 on:** February 08, 2010, 09:52:25 PM »

Kelu Different strokes for Different Folk ( thats not my cup of Tea) Somebody has that on their Car?

BigSal · « **Reply #12 on:** February 08, 2010, 10:30:55 PM »

I understand he's a plumber...

KWhale · « **Reply #13 on:** February 09, 2010, 03:11:52 AM »

I can see the potential in Kelu's video. Park by the lake, drop the top, rest the shotgun on the top of the windshield, and call them pesky ducks right to you by revving the engine. Now if these cars only had room for the "trunk retriever" you'd be all set.

Sol Asylum · « **Reply #14 on:** February 10, 2010, 01:25:42 AM »

Quote from: KWhale on February 09, 2010, 03:11:52 AM

I can see the potential in Kelu's video. Park by the lake, drop the top, rest the shotgun on the top of the windshield, and call them pesky ducks right to you by revving the engine. Now if these cars only had room for the "trunk retriever" you'd be all set.

You know for a Canadian you sure think like gun toting American. Charlton Heston would have been proud!

Kelu · « **Reply #15 on:** February 10, 2010, 05:10:27 AM »

So spicy, you saw what a BOV means, still want to do it?

Dave@DDMworks · « **Reply #16 on:** February 10, 2010, 11:03:53 AM »

Quote from: spicy3480 on February 08, 2010, 03:56:14 PM

I'm sure Lyndon could do this for me in order to have the BOV work. Dave and Randy could relocate the MAF for me. I hope they chime in here and tell me if it is worth it.

Steve,

As shabby pointed out, we would need to make a 3" tube for you to go from the intercooler to the engine with a MAF location, a blow off valve mount and a mount for the Tmap sensor. On your automatic and with a stock turbo, I really do not see a strong case for it though, unless you really want to add the blow off valve duck call

spicy3480 · « **Reply #17 on:** February 10, 2010, 01:28:27 PM »

HA HA Will it really sound like a duck?

Kuprito · « **Reply #18 on:** February 10, 2010, 05:31:02 PM »

Quote from: Dave@DDMworks on February 10, 2010, 11:03:53 AM

Steve,

As shabby pointed out, we would need to make a 3" tube for you to go from the intercooler to the engine with a MAF location, a blow off valve mount and a mount for the Tmap sensor. On your automatic and with a stock turbo, I really do not see a strong case for it though, unless you really want to add the blow off valve duck call

I need that pipe, could you make that for me? How much?

Kelu · « **Reply #19 on:** March 25, 2010, 08:11:38 PM »

Steve, found you the best solution:

http://www.youtube.com/watch?v=O2ZW3PSgdb4&NR=1

Still want a BOV?

spicy3480 · « **Reply #20 on:** March 27, 2010, 04:04:48 PM »

HA HA no thanks:) That's almost as funny as the thing you plug into your cigarette lighter and it makes the exhaust sound like a V8 or V10.

Kelu · « **Reply #21 on:** March 27, 2010, 04:27:47 PM »

You should make yourself distributor of that thing because you are a exhaust sales, I would have bought one with the nice package you offered me

remembered I have told you that i want a V8 sound from my exhaust?

Do you have a link for that?

spicy3480 · « **Reply #22 on:** March 27, 2010, 11:51:38 PM »

I have heard it in person...sounds terrible!!

News:

Author Topic: BOV Install Possible?? (Read 9335 times)

lil goat