Author Topic: DDMWorks Cross Bay Brace (Read 78859 times)

Excelsior · « **Reply #25 on:** August 14, 2010, 01:27:52 AM »

I can almost guarantee that most people doing those inspections have no clue where the original WAS/IS unless there are two cars there and the other one is stock.

Dave@DDMworks · « **Reply #26 on:** August 14, 2010, 08:54:14 AM »

We did get the pricing back for the brace and it is going to be less than I told some people originally.

The Cross Bay Brace is $240
The P/S relocation kit is $75

The first batch of these we are going to give a discount to everyone that buys -

First Batch of Cross Bay Brace's - $200
or get the brace and a P/S relocation together for -$250

The braces are going to come in red and black at the same price for the first batch only, then they will be available in black only.

Website ordering will be up on Monday, the first batch of braces are slated to ship the week of August 30th.

We are giving everyone on Kappaperformance first crack at these and will release it to the big board on Tuesday.

Thanks again,
Dave

TomatoSoup · « **Reply #27 on:** August 14, 2010, 10:43:57 AM »

Woo hoo!

melissadunagan · « **Reply #28 on:** August 14, 2010, 03:59:37 PM »

I want one also. I sure can find more things I want and not enough money to go a round.

IBDRINKEN · « **Reply #29 on:** August 14, 2010, 05:11:39 PM »

wold it be possible to get in that flat black instead of the gloss

melissadunagan · « **Reply #30 on:** August 14, 2010, 06:12:03 PM »

Hey Dave how about the selling the brace and the coil cover as a set, sence you need to remove the plastic cover.

Thanks

shabby · « **Reply #31 on:** August 14, 2010, 06:29:58 PM »

Quote from: Dave@DDMworks on August 14, 2010, 08:54:14 AM

The P/S relocation kit is $75

Have you guys thought of a p/s oil cooler kit? Not sure i want to spend $75 for some lines that give me more capacity when the stock cooler is a piece of junk. After one ax run my ps pump started whining already.

snaponbob · « **Reply #32 on:** August 14, 2010, 07:12:03 PM »

Quote from: shabby on August 14, 2010, 06:29:58 PM

Have you guys thought of a p/s oil cooler kit? Not sure i want to spend $75 for some lines that give me more capacity when the stock cooler is a piece of junk. After one ax run my ps pump started whining already.

Have you changed to Redline synthetic p/s fluid? Fixed that symptom on mine and many others.

shabby · « **Reply #33 on:** August 14, 2010, 09:24:56 PM »

No i have not, seems like a cheap and easy fix though.

snaponbob · « **Reply #34 on:** August 14, 2010, 09:31:36 PM »

Quote from: shabby on August 14, 2010, 09:24:56 PM

No i have not, seems like a cheap and easy fix though.

You have a PM.

1LILNDN · « **Reply #35 on:** August 14, 2010, 11:39:51 PM »

Dave can I get the Brace in the StarBurst to match the coil cover on this special ?

Gentleman Jack · « **Reply #36 on:** August 15, 2010, 12:26:37 AM »

Pretty sure it's RED or BLACK. I have some pink paint for anyone who wants a special addition. The paint work will be free. Just cover shipping both ways and you will get a beautiful piece of art after 5-7 days. For an additional fee of $1.00 that will be donated to charity, if will be autographed by the artist.

GJ

melissadunagan · « **Reply #37 on:** August 15, 2010, 05:10:57 AM »

Dave how many will you be making in the first batch.

And Bubble gum I just may take you up on your offer to paint mine pink when I get one.
Hee Hee

kennysabarese · « **Reply #38 on:** August 16, 2010, 08:00:30 AM »

Please explain the difference between a shock tower brace and a chassis brace like Werks and it's affect on handling for the car.

Also you mentioned numbers to share about how much stiffer etc. Thanks!

Critterman · « **Reply #39 on:** August 16, 2010, 08:58:10 AM »

Kenny would you buy JFM?

Look at the car from the front, chassis has cross member to mount the engine and support the suspension, Adding a brace here will stiffen it a bit, how much? I don't think any figures have been provided.

From the lower braces the strut tower are mounted and the tops are mounted in to basically body metal. So as you slam around corners they move, how much I don't have a clue. I do know that the concept of a top brace is used in all forms of racing to stiffen the front suspension and tie it together. In some applications a rear top brace is used as well.

DDM said they will provide figures, so I would wait for them to finish their testing for those figures. I don't think they are going to be testing the Werks unit tho, that would be up to Werks to provide the figures on their brace.

kennysabarese · « **Reply #40 on:** August 16, 2010, 10:46:36 AM »

Quote from: Critterman on August 16, 2010, 08:58:10 AM

Kenny would you buy JFM?

Look at the car from the front, chassis has cross member to mount the engine and support the suspension, Adding a brace here will stiffen it a bit, how much? I don't think any figures have been provided.

From the lower braces the strut tower are mounted and the tops are mounted in to basically body metal. So as you slam around corners they move, how much I don't have a clue. I do know that the concept of a top brace is used in all forms of racing to stiffen the front suspension and tie it together. In some applications a rear top brace is used as well.

DDM said they will provide figures, so I would wait for them to finish their testing for those figures. I don't think they are going to be testing the Werks unit tho, that would be up to Werks to provide the figures on their brace.

JFM?

I don't expect DDM to test the Werks brace, I know theoretically, the two parts are not meant to accomplish the same goal, I was curious to hear Dave's thoughts on this.

DRM · « **Reply #41 on:** August 16, 2010, 11:30:25 AM »

Thought we could order today....I don't see it on the web site yet.

Arabas · « **Reply #42 on:** August 16, 2010, 12:22:12 PM »

DRM, as i can understand you can order by emailing DDM or by sending a pm.
you don t have to wait for it to get on their site.
it is an offer to members of this forum to get it first

Critterman · « **Reply #43 on:** August 16, 2010, 12:54:15 PM »

Kenny,

JFM Just #$%^ magic

Dave@DDMworks · « **Reply #44 on:** August 16, 2010, 01:10:23 PM »

The website page is being worked on and will be up this afternoon to allow pre orders, I will make an announcement when it goes up

Thanks,
Dave

LatinVenom · « **Reply #45 on:** August 16, 2010, 01:33:02 PM »

Actually the chassis brace and the tower brace in our cars are pretty much equal.
Why, because in our car the tower and the chassis are the same part. The tower is welded to the frame.
The one that I designed and is been in my car for the last 2 month provides the same level of stiffens to the front of the car.
By the way mine does not required any changes like the one from Werks, mine is a very simple install.
All that said, mine will end up been a one of, since I really do not want to compete with DDM's tower brace.
I designed it to be an alternative to the Werks front chassis brace, that requires professional installation and also some other changes.

TomatoSoup · « **Reply #46 on:** August 16, 2010, 01:37:12 PM »

Quote from: LatinVenom on August 16, 2010, 01:33:02 PM

The one that I designed and is been in my car for the last 2 month provides the same level of stiffens to the front of the car.
By the way mine does not required any changes like the one from Werks, mine is a very simple install.
All that said, mine will end up been a one of, since I really do not want to compete with DDM's tower brace.
I designed it to be an alternative to the Werks front chassis brace, that requires professional installation and also some other changes.

(for comparison purposes only)

LatinVenom · « **Reply #47 on:** August 16, 2010, 01:38:42 PM »

No pictures will be provided.

DeepBlueGXP · « **Reply #48 on:** August 16, 2010, 01:56:34 PM »

Quote from: Critterman on August 16, 2010, 12:54:15 PM

Kenny,

JFM Just #$%^ magic

it's usually called PFM

TS, this thread is for DDM so LV won't continue his discussion here any longer.

TomatoSoup · « **Reply #49 on:** August 16, 2010, 02:11:39 PM »

Quote from: DeepBlueGXP on August 16, 2010, 01:56:34 PM

TS, this thread is for DDM so LV won't continue his discussion here any longer.

Sure, I understand. I was thinking that seeing as LV wasn't selling anything in competition, it would be OK.

It would be nice to see how his compares, but never mind.

News:

Author Topic: DDMWorks Cross Bay Brace (Read 78859 times)