Author Topic: normsfiberglass new rear facia treatment  (Read 7888 times)

0 Members and 1 Guest are viewing this topic.

Offline normsf

  • Vendor
  • Master Tech
  • *
  • Posts: 397
  • Karma: +4/-0
  • Norms Fiberglass
    • Norms Fiberglass
normsfiberglass new rear facia treatment
« on: August 19, 2010, 10:07:17 PM »
Hello and thank you to our loyal customers, As many of you know I make rear facias for our Kappas with 13 different styles. Well I just sent out this one its our dual outside diffusser that has the "Solstice" embedded in the center. What we did different with this one for our customer was to grind the letters off and open them up with screen behind them. In person it looks awesome. OK Im a little biased, thought Id share, thanks Norm 574-255-7843


Offline DeepBlueGXP

  • KappaPerformance Site Owner
  • Administrator
  • Shop Foreman
  • *
  • Posts: 9228
  • Karma: +13/-6
  • Displaced Buffalo Bills Fan
    • Kappa Performance Forum
Re: normsfiberglass new rear facia treatment
« Reply #1 on: August 19, 2010, 10:10:17 PM »
Looks like it came out great. 

Offline Sly Bob

  • Administrators
  • Shop Foreman
  • *
  • Posts: 8077
  • Karma: +19/-10
  • My new grandson
    • Kappa Performance Forum
Re: normsfiberglass new rear facia treatment
« Reply #2 on: August 19, 2010, 10:53:53 PM »
It really does look good. I don't suppose that there is a chance that we can see a picture of it on the car?
Just trying to do my part...

Mods: Lose the chicklets, VentureShield, Dual horns, AfterShock spoiler, Weathershield cover, Lil Chromies, Red calipers with black Solstice stickers, Opel GT antenna and Solo GXP-RCD exhaust with a Solo hi-flow cat!

Offline normsf

  • Vendor
  • Master Tech
  • *
  • Posts: 397
  • Karma: +4/-0
  • Norms Fiberglass
    • Norms Fiberglass
Re: normsfiberglass new rear facia treatment
« Reply #3 on: August 20, 2010, 12:08:22 AM »
It really does look good. I don't suppose that there is a chance that we can see a picture of it on the car?
Hello well that one was sent today, but heres the same facia without the "Solstice" cut out to give you an idea. Thanks again Norm


Offline Gentleman Jack

  • Chief Financial Officer, Color Professional
  • Premium Member
  • Shop Foreman
  • *
  • Posts: 8982
  • Karma: +26/-82
  • I'm here. If I wasn't here, I'd be there.
Re: normsfiberglass new rear facia treatment
« Reply #4 on: August 20, 2010, 02:23:23 AM »
Norm, I imagine it would be fairly easy to add some lights behind that to iluminate at night?  Or perhaps work as a brake light?  Just some thoughts...  Looks great!

GJ
Make the right choices now

Offline elff

  • Premium Member
  • General Manager
  • *
  • Posts: 11381
  • Karma: +26/-58
Re: normsfiberglass new rear facia treatment
« Reply #5 on: August 20, 2010, 09:05:08 AM »
Norm

I sent you a PM a while ago.

Thanks

Offline redcomet303

  • Tech
  • **
  • Posts: 36
  • Karma: +0/-0
Re: normsfiberglass new rear facia treatment
« Reply #6 on: August 20, 2010, 02:18:14 PM »
looks amazing. can you give pricing info and can you make them without the solstice in it?

Offline GXPinKC

  • Premium Member
  • Gearhead
  • *
  • Posts: 3537
  • Karma: +2/-2
  • GXPinKC
    • KappaPerformance.com
Re: normsfiberglass new rear facia treatment
« Reply #7 on: August 22, 2010, 10:25:44 PM »
I agree with redcomet303.  It is a knockout!!!  :thumbs:
Code 1100, Order#KCPDVV 04-28-2006, Delivery: 12-27-2006 

2007 Aggressive GXP, 5-speed, Ebony Leather seats w red accent stitching, Chrome Wheels, Air, 6-Disc, Monsoon, Sport Metallic Pedals & Premium Headliner.

MSRP $30,300 less $1,000 GMMC credit.  Deal: $28,180. ($2,120 under MSRP).


DDM Race Backbone, Probeam, & Red Cross Bay Brace
JPM Leather Center Console
Windrestrictor
MRZ Performance Billet Caps
Beach Party FBC
Solo Mach Exhaust

Offline normsf

  • Vendor
  • Master Tech
  • *
  • Posts: 397
  • Karma: +4/-0
  • Norms Fiberglass
    • Norms Fiberglass
Re: normsfiberglass new rear facia treatment
« Reply #8 on: August 24, 2010, 09:25:52 PM »
looks amazing. can you give pricing info and can you make them without the solstice in it?
Hello and thankyou to you and Pinky, The dual ouside diffusser is $349.00 ready to paint. If you dont like the Solstice logo in the center we could cut that out into a slot with screen behind it, just a thought. Thanks Norm

Offline Morfious

  • SMMM 7 Cup Stacking Champion
  • Upgraded Member
  • Master Tech
  • *
  • Posts: 298
  • Karma: +1/-1
  • Tryin' to keep the rubber side down since age 2
Re: normsfiberglass new rear facia treatment
« Reply #9 on: September 02, 2010, 10:49:13 AM »
Hello and thankyou to you and Pinky, The dual ouside diffusser is $349.00 ready to paint. If you dont like the Solstice logo in the center we could cut that out into a slot with screen behind it, just a thought. Thanks Norm

Is it possible to just have a rear diffuser without any cuts or solstice logo (dual side exit)?  I really like the diffuser, but want a smooth look out back.  I know the center outlet diffusers do NOT have the solstice logo.  Just trying to get that same look with the side exit diffusers.
Mean GXP Delivered 1/30/2007 $MSRP +$2K
Mods:
Pioneer AVIC D3 Nav System
Solo-Performance Street Race exhaust
Debadged
JPM interior (Doors, steering wheel, shifter, console now with 100% more Chuck Norris)
Custom dash and Flush mounted Valentine 1 Radar Detector
O.Z. Ultraleggera wheels with Dunlop DZ101
DDM Works (Big Brake Kit, backbone, intercooler, valve and coil cover)
GXP ZOK Rear sway bar



Offline Brad Kenny

  • Gearhead
  • ****
  • Posts: 1488
  • Karma: +0/-1
Re: normsfiberglass new rear facia treatment
« Reply #10 on: September 02, 2010, 11:22:09 AM »
Great new product! Can't wait to do the big upgrade to the SQR-2 exhaust and get my very own Norm's Fascia. It is going to look great on Lindsey!!!
Continental Tires
DDM Works
StunnerLights.com
ASAP Graphics
King Penn
V-LEDs
Superbright LEDs

Offline Critterman

  • Retired, thank you very much
  • Premium Member
  • General Manager
  • *
  • Posts: 13709
  • Karma: +18/-58
  • Baltimore/Washington Corridor
Re: normsfiberglass new rear facia treatment
« Reply #11 on: September 02, 2010, 01:36:57 PM »
I believe Norm makes a dual outside exit, smoth facia, not sure if he has a smooth defused facia.  But I am sure he will speak up in the next 24 hours.
GONE: (but not forgotten) 2006 Cool named IXABEL (BISH-AH-BEL) Mayan for "Good Roads"
DDM StageIII intercooled Supercharger, Wisco ceramic coated pistons, Carrillo rods, superTech valves and Springs, Ported and polished head, Exedy Stage II Clutch,
big brake kit, slotted/drilled Rotors w/Porterfield pads & blue juice, Backbone, Probeam, Cross Strut Brace Underhood, trunk, & door Lights, ZOK suspension
JPM Center console, door inserts, & dash Seat bolster & lumbar support
Focuztech Tri-Y Header & hi-flow cat, Solo Performance SQR-2, Norm's Rear facia, Heated Seats, Blackface gau

Offline smartin

  • Banned
  • Master Tech
  • *
  • Posts: 164
  • Karma: +0/-0
Re: normsfiberglass new rear facia treatment
« Reply #12 on: September 02, 2010, 01:39:07 PM »
Great new product! Can't wait to do the big upgrade to the SQR-2 exhaust and get my very own Norm's Fascia. It is going to look great on Lindsey!!!

That would look awesome on Lindsey! :thumbs:

Offline SHiNY

  • Faster than Slowest Romanian
  • Premium Member
  • Gearhead
  • *
  • Posts: 4443
  • Karma: +11/-47
  • Every Cloud has a Silver Lining
Re: normsfiberglass new rear facia treatment
« Reply #13 on: September 02, 2010, 01:45:56 PM »
... but want a smooth look out back. 

Way too easy Jason :lol:

Offline Morfious

  • SMMM 7 Cup Stacking Champion
  • Upgraded Member
  • Master Tech
  • *
  • Posts: 298
  • Karma: +1/-1
  • Tryin' to keep the rubber side down since age 2
Re: normsfiberglass new rear facia treatment
« Reply #14 on: September 05, 2010, 12:28:39 AM »
Always got to keep it nice for the ladies.
Mean GXP Delivered 1/30/2007 $MSRP +$2K
Mods:
Pioneer AVIC D3 Nav System
Solo-Performance Street Race exhaust
Debadged
JPM interior (Doors, steering wheel, shifter, console now with 100% more Chuck Norris)
Custom dash and Flush mounted Valentine 1 Radar Detector
O.Z. Ultraleggera wheels with Dunlop DZ101
DDM Works (Big Brake Kit, backbone, intercooler, valve and coil cover)
GXP ZOK Rear sway bar