Author Topic: What did you do to your Kappa today - Part 2 (Read 1418296 times)

DickW · « **Reply #150 on:** August 11, 2011, 06:49:51 AM »

DDM powdercoated and installed my GM cold air intake. Dave also soldered my GMPP upgrade solenoids. That should eliminate the occasional pending trouble codes 0101 and 0106. It should also eliminate the DIC occasionally showing 0 boost.

spicy3480 · « **Reply #151 on:** August 11, 2011, 11:12:12 AM »

Car will be coming back from the shop next week...fenders have been pulled out to accommodate the new larger wheels, Norm's side skirts have been molded into the body, new race bumper is on and painted...a few minor repairs left and painting the brake calipers to match my stripes. Latin Venom chassis brace is installed as well. I can not wait to get the car back...

elff · « **Reply #152 on:** August 11, 2011, 07:37:18 PM »

Wow, that's gonna be awesome. Can't wait to see the end result.

Nice avatar. Did you actually pick this one yourself

spicy3480 · « **Reply #153 on:** August 11, 2011, 10:06:29 PM »

HA HA thanks. Nope, someone put it there for me:)

1LILNDN · « **Reply #154 on:** August 12, 2011, 10:43:40 PM »

Got my K&N CAI today and already Installed. Sounds good. I downloaded a complete set of Instructions and printed. K&N 69-8433ttk install is the solstice GXP step by step pictures and print

spicy3480 · « **Reply #155 on:** August 13, 2011, 12:48:37 AM »

Preview of side skirts blended into body:

Racing Bumper

IBDRINKEN · « **Reply #156 on:** August 13, 2011, 01:51:38 AM »

so your having everything molded on more or less. The only issue I see as I have done this in the past that it might crack. Looking good tho..

spicy3480 · « **Reply #157 on:** August 13, 2011, 02:31:04 AM »

Not everything...just the side skirts. The rear bumper is one piece as well...much less maintenance and they did a fantastic job molding it. The front splitter cant be molded because the front bumper is too flexible...a crack there is almost a definite. Everything else is molded in:) The fenders were pulled out about 1 inch...looks a touch wider than stock and like it was not even touched. The new wheels are just gorgeous...very excited!

IBDRINKEN · « **Reply #158 on:** August 13, 2011, 03:55:56 AM »

Cant wait for the finished project...

Arabas · « **Reply #159 on:** August 13, 2011, 11:53:55 AM »

looking forward to see how it looks Steve!

GXPinKC · « **Reply #160 on:** August 13, 2011, 12:37:15 PM »

It is going to look amazing, for sure...Sweet Indeed!

Sol Asylum · « **Reply #161 on:** August 13, 2011, 12:59:20 PM »

Spicy is the door open in your pics, or is that actually how the fender and rocker panels blend back into the door edge?

PS new avatar again?

spicy3480 · « **Reply #162 on:** August 13, 2011, 09:39:18 PM »

The door was open bc they painted the entire side. It blends right into the body, as if it came from the factory like that.

Someone kept logging into my account and changing it on me...I had to change the password and Joe changed it back to that one for me while we make sure my logon is secure again. We are investigating.

Sol Asylum · « **Reply #163 on:** August 13, 2011, 09:57:26 PM »

Quote from: spicy3480 on August 13, 2011, 09:39:18 PM

Someone kept logging into my account and changing it on me...I had to change the password and Joe changed it back to that one for me while we make sure my logon is secure again. We are investigating.

Still got the same girlfriend that you had at the mod meet? Maybe GJ corrupted her.

spicy3480 · « **Reply #164 on:** August 13, 2011, 10:15:17 PM »

HA HA no I broke it off with her...I changed my password on here so nobody can log onto my account. I have a few ideas who it might be so I am investigating.

IBDRINKEN · « **Reply #165 on:** August 13, 2011, 11:05:47 PM »

did you also mold it to the fender, I ask becasue the battery is there

elff · « **Reply #166 on:** August 13, 2011, 11:23:18 PM »

Quote from: spicy3480 on August 13, 2011, 09:39:18 PM

The door was open bc they painted the entire side. It blends right into the body, as if it came from the factory like that.

Someone kept logging into my account and changing it on me...I had to change the password and Joe changed it back to that one for me while we make sure my logon is secure again. We are investigating.

Wow
I just thought it was someone messing with your avatar as a joke like we did with GJ.
This is not funny. I hope you find the culprit.

Car looks awesome. Can't wait to see the final product.

spicy3480 · « **Reply #167 on:** August 13, 2011, 11:51:20 PM »

Quote from: IBDRINKEN on August 13, 2011, 11:05:47 PM

did you also mold it to the fender, I ask becasue the battery is there

I don't believe they did...I think it stops right before the fender...it was faded in.

spicy3480 · « **Reply #168 on:** August 13, 2011, 11:53:03 PM »

Quote from: elff on August 13, 2011, 11:23:18 PM

Wow
I just thought it was someone messing with your avatar as a joke like we did with GJ.
This is not funny. I hope you find the culprit.

Car looks awesome. Can't wait to see the final product.

Thanks Elff....that's what I first thought as well, but only three people can actually change my avatar, and none of them did it. It had to be someone getting into my account...we are investigating IP addresses now...maybe the culprit will come clean before we actually find out who it is. It would be the more mature thing to do, but hey, maturity is asking a lot sometimes.

Sol Asylum · « **Reply #169 on:** August 14, 2011, 12:24:43 AM »

I too have to admit I thought that it was just done as a joke but when I mentioned it to Joe last weekend he said no he never messed with it which left me kind of wondering if maybe it had been that way for a while and you had just finally noticed. I guess it wasn't, I had no idea someone was hacking your account.

I hope you find them and kick them off the forum if they are a member, I can say that knowing I didn't do it.

Any chance the ex knew your password?

spicy3480 · « **Reply #170 on:** August 14, 2011, 08:45:54 AM »

I am thinking maybe, but I don't know if she would know what an avatar actually is and how to change it. Why she would think changing my avatar is taking a shot at me...I don't know LOL. I have other ideas who it might be as well, and if I find out, there will be a words outside of this forum.

2.0 tspeed · « **Reply #171 on:** August 14, 2011, 08:58:08 AM »

Why would someone wanna hack into a account on this forum :-/
Dosnt make sense there's nothing valuable here

miller11386 · « **Reply #172 on:** August 14, 2011, 09:43:22 AM »

Quote from: spicy3480 on August 14, 2011, 08:45:54 AM

I am thinking maybe, but I don't know if she would know what an avatar actually is and how to change it.

I see you only go for the brightest bulbs steve

Today I drove home something that made my kappa jealous:

Modified c6 with z51 handling package. Huge cam, full headers X pipe and exhaust with a tune. Kit claims 500bhp, but a dyno in arizona threw down 400whp in 115 arizona heat.

Most of you know what my car sounds like, you cant even hear it beside this vette.

So basically i am curious if we slap a quiet muffler on this if we will hurt the tune / motor. May require detune

I will be calling dave this week.

GXPinKC · « **Reply #173 on:** August 14, 2011, 10:03:06 AM »

miller11386, uh, you might of hurt it's feelings! But what a sweet ride indeed! Uh, if it is a secret ok, then I must not say more and don't mean to interlope but are you kidding me? Ya gonna consider the purchase of that sweetheart? I can't imagine in my wildest dreams having that car parked beside your 2008 Saturn Sky Redline in the garage? However I must indeed disagree with you cause your present ride the 2008 Saturn Sky Redline will not be jealous in the least, cause these days they are rare and there are loads of Corvette's on every corner but yes it is a sweet ride for sure. Are you thinking of adding the Vette as a stablemate for your gorgeous Sky Redline?

cdflint · « **Reply #174 on:** August 14, 2011, 10:04:00 AM »

Working on my hood this weekend. Hood hinges were loose so trying to set the sweet spot for the gap to the door has been a pain. Then, when its was all lined up(settling with the gap) and tightened down, I found out my hood latch on the driver side is broken and won't lock in and my rubber stop ripped in half. Just when I think I'm so close to be on the road. Whamo!

Steve - side skirts look good. The door shot looks like you are about to pass someone... and they lost a bumper too.

News:

Author Topic: What did you do to your Kappa today - Part 2 (Read 1418296 times)