Author Topic: Solstice Coupe GXP with LS3 and Edelbrock E Force supercharger from Werks (Read 89133 times)

sbindley · « **Reply #75 on:** January 12, 2012, 06:23:49 PM »

Wheels are Gravana/Monarch 19" with 245-40-19's in front and 275-35-19's in rear. They are discontinued and very tough to find.

elff · « **Reply #76 on:** January 12, 2012, 07:01:50 PM »

What tires?

sbindley · « **Reply #77 on:** January 12, 2012, 07:06:39 PM »

Yokohama S-Drive

Gentleman Jack · « **Reply #78 on:** January 12, 2012, 09:59:12 PM »

Same as I have. Now that they are broken in, they are great! They did try to kill me when they were new!

SHiNY · « **Reply #79 on:** January 12, 2012, 10:22:30 PM »

That's because they hated you.

sbindley · « **Reply #80 on:** January 15, 2012, 12:10:38 PM »

Rumors of dyno numbers this coming week.

Brazen17 · « **Reply #81 on:** January 15, 2012, 12:13:48 PM »

Quote from: sbindley on January 12, 2012, 06:23:49 PM

Wheels are Gravana/Monarch 19" with 245-40-19's in front and 275-35-19's in rear. They are discontinued and very tough to find.

Is your car lowered any? Any rub problems with the 275's? One more question! How wide is the rear wheel?

elff · « **Reply #82 on:** January 15, 2012, 12:35:42 PM »

Width and offset would be nice too. at some point I might go that same route. It's real easy to spin my current tires so added contact patch would be nice.

BTW - I haven't said this yet

KILLER CAR!!!!!!!!!!! What a total Beast!!!

sbindley · « **Reply #83 on:** January 16, 2012, 10:05:28 AM »

Car was not lowered at all and never a rub. I believe the rears are 19x9.5. Werks has lowered the car a bit now but I have not gotten it back yet.

ChopTop · « **Reply #84 on:** February 07, 2012, 11:36:46 AM »

Hey SB, have you thought of adding LS3 Supercharged emblems to the side of the scoop? Still be subtly while at the same time giving it a DFWM attitude.

sbindley · « **Reply #85 on:** February 07, 2012, 02:43:38 PM »

Nope, no emblems, etc. The tailpipes will do the talking.

sbindley · « **Reply #86 on:** March 02, 2012, 11:50:23 AM »

Almost there...

sbindley · « **Reply #87 on:** March 02, 2012, 12:07:17 PM »

Dave just sent a couple more things. Here is a link to exhaust at idle, and a photo of the 6-speed. I want to change the boot back to stock color to match the knob instead of the tan seats. Thoughts?

http://s259.photobucket.com/albums/hh308/PerformanceAutowerks/Customer%20Vehicles/ScottsLS3GXPCoupe/?action=view&current=IMG_1214.mp4

Arabas · « **Reply #88 on:** March 02, 2012, 12:19:49 PM »

Definetly. Black will look better

SKY888 · « **Reply #89 on:** March 02, 2012, 02:33:14 PM »

I like BLACK

Sly Bob · « **Reply #90 on:** March 02, 2012, 07:53:07 PM »

Sounds great but 'cause you asked, yeah ya' gotta lose the tan boot.

Gentleman Jack · « **Reply #91 on:** March 02, 2012, 08:47:38 PM »

Need a pic of the interior as a whole if possible.

What do you think about black door handles? I see you painted the windshield frame ( or did black cars come black? Or did coupes come body color?) but the handles seem to stand out too much to me.

That said, I love your car and I'd marry you if I get half the car in the divorce. ( I'm not good with commitment)

1LILNDN · « **Reply #92 on:** March 02, 2012, 10:20:13 PM »

SB ; if your interested in Black Handles ,The Cobalt Has a factory Satan Black . They are the same handles in different colors. I have a pr. on Mine

sbindley · « **Reply #93 on:** March 04, 2012, 11:47:10 AM »

Thanks for the thoughts. Black handles may look good. How easy are they to swap? What year Cobalts? Here are a couple of photos of the interior:

SKY888 · « **Reply #94 on:** March 04, 2012, 12:12:53 PM »

well since you have those tan seats.....the tan shift boot works fine then!

Gentleman Jack · « **Reply #95 on:** March 05, 2012, 01:50:51 AM »

Totally agree. Tan works great with the rest. I'd look at covering the center console arm rest with the same and really complete the look.

Critterman · « **Reply #96 on:** March 05, 2012, 08:54:08 AM »

^what he said^ tan on tan and cover the center console.

sbindley · « **Reply #97 on:** March 05, 2012, 09:34:17 AM »

Thanks again. I have the center cup holder waiting to go on that matches the black interior. I think I will change the boot back as well. I just don't like the boot and knob being different, and a tan knob would get dirty too fast.

spicy3480 · « **Reply #98 on:** March 05, 2012, 04:12:58 PM »

Great looking and sounding car...love the hood scoop!!! Can't wait to see a video of that car under load!!

Great job and really clean!

ChopTop · « **Reply #99 on:** March 06, 2012, 01:05:13 PM »

How anal do you want to get? I'm thinking shifter/shifting boots generally match each other (and those usually match the steering wheel). Course you could go with a matching wood shifter... but then you'd might need a JPM shifter just so you can use an aftermarket wood shift-knob. Downside with tan leather shift knobs is they tend to get dirty looking.

http://www.knobmeister.com/page14.php?category=1&view=productListPage

News:

Author Topic: Solstice Coupe GXP with LS3 and Edelbrock E Force supercharger from Werks (Read 89133 times)