Author Topic: MD Mod Meet 6 Install Schedule and Pricing for JPM (Read 20290 times)

JPM · « **Reply #25 on:** September 09, 2009, 10:55:20 AM »

Quote from: Ben L on September 08, 2009, 08:09:16 PM

Please bring charcoal perforated alacantra for the console and pad. I will get you the dimensions (it will not be the entire console; just a trapezoidal piece, for in back of the shifter handle) tomorrow.

Ok, we should have plenty with us.

Critterman · « **Reply #26 on:** September 09, 2009, 06:53:00 PM »

Joe, goat and I talked about this gel before. goat if you have enough and if Joe can put it in my new console, I would like to buy some from you as well.

spicy3480 · « **Reply #27 on:** September 09, 2009, 08:24:38 PM »

Joe,
Can you get a price for me on the Second Skin for the rear panel, floor, and doors...maybe trunk too? I have not heard back from rudeboy in terms if him installing the sound deadening.

JPM · « **Reply #28 on:** September 10, 2009, 11:09:02 AM »

Quote from: spiky3480 on September 09, 2009, 08:24:38 PM

Joe,
Can you get a price for me on the Second Skin for the rear panel, floor, and doors...maybe trunk too? I have not heard back from rudeboy in terms if him installing the sound deadening.

Bulk pack would probably get it all covered: http://www.secondskinaudio.com/vibration-mat/damplifier-pro.php?category=70

JPM · « **Reply #29 on:** September 10, 2009, 11:10:55 AM »

Quote from: Critterman on September 09, 2009, 06:53:00 PM

Joe, goat and I talked about this gel before. goat if you have enough and if Joe can put it in my new console, I would like to buy some from you as well.

I'll have to see how easily the stuff sews through. The machine might make a mess of it. With the diamond pattern, it will be all over the place.

spicy3480 · « **Reply #30 on:** September 10, 2009, 11:48:15 AM »

Quote from: JPM on September 10, 2009, 11:09:02 AM

Bulk pack would probably get it all covered: http://www.secondskinaudio.com/vibration-mat/damplifier-pro.php?category=70

OK I will order that for the meet...you can install that while you have the car partly apart...if anything it will kill some drone and make the speakers sound better. If it won't, then someone let me know so I don't waste the money.

DeepBlueGXP · « **Reply #31 on:** September 10, 2009, 01:47:17 PM »

Joe, you will be setting up and working out of the garage by the cabin. If you have any extra tripod lights bring it. I have one tripod light. I spoke to the GAHH company and they are mailing me a few samples.

JPM · « **Reply #32 on:** September 10, 2009, 02:03:14 PM »

Thanks Joe. We'll pick up a few.

Critterman · « **Reply #33 on:** September 10, 2009, 03:34:18 PM »

I have one I can bring if needed.

JPM · « **Reply #34 on:** September 24, 2009, 06:24:33 PM »

bump, one week left to place orders and make appointments.

1LILNDN · « **Reply #35 on:** September 26, 2009, 12:28:52 PM »

Joe can you do Embrodreyon the GXP Floor mats would like 1 LIL NDN in red above the Logo and how much?

JPM · « **Reply #36 on:** September 26, 2009, 12:44:03 PM »

Quote from: 1 LIL NDN on September 26, 2009, 12:28:52 PM

Joe can you do Embrodreyon the GXP Floor mats would like 1 LIL NDN in red above the Logo and how much?

Sorry, those are a little to bulky and thick for my embroidery machine.

spicy3480 · « **Reply #37 on:** September 26, 2009, 09:13:22 PM »

Joe,
Can you embroider the exterior of my car in a new color LOL? I was thinking neon green or neon yellow, possibly with black or red stitching???

kennysabarese · « **Reply #38 on:** October 03, 2009, 09:13:30 PM »

i want to check out the kneepads, for either side. need to look closely into placement before i can commit.

also if you could bring cloth seat bottoms that we talked about a few months ago. that would be great

1LILNDN · « **Reply #39 on:** October 04, 2009, 04:47:33 PM »

Steve I'll help with the sound deadener you bring a Big needle and a thimble ( Joe might have the thread in RED) I'll lay out the LOGO for you.

mao

Morfious · « **Reply #40 on:** October 04, 2009, 07:13:58 PM »

Hey Joe,

I was wondering if we could finish my steering wheel and get the airbag covered in black alcantara as well, since we couldn't get it together in Gerogia. I also want to talk about changing out the padding in my center console to the more dense foam you used in teh door panels. We can talk at the meet, I'll just bring cash! Thanks.

JPM · « **Reply #41 on:** October 05, 2009, 03:30:57 PM »

Quote from: Morfious on October 04, 2009, 07:13:58 PM

Hey Joe,

I was wondering if we could finish my steering wheel and get the airbag covered in black alcantara as well, since we couldn't get it together in Gerogia. I also want to talk about changing out the padding in my center console to the more dense foam you used in teh door panels. We can talk at the meet, I'll just bring cash! Thanks.

Not a problem. Shouldn't take too long for the airbag.

BTW, goat is bringing some sort of gel insert we'll be prototyping arm pads with. Might want to jump in on that wagon if you want.

Ben L · « **Reply #42 on:** October 05, 2009, 03:49:32 PM »

Joe -- I think am coming down Friday. Have a car show for wounded vets at Walter Reed Saturday, and an SCCA Solo event at FedEx Sunday, so cannot make those days.

I will PM you dimensions for the rear trans tunnel pad trapezoid (for the FFR Daytona Coupe) tonight. You can pre-cut the base stock, or do it at the mod meet, your choice, but I'd like the spiffy Goat gel stuff, and charcoal perforated alacantra. Self adhesive 3M tape should stick the thing to powder coated aluminum, right?

Is that OK? Please let me know.

JPM · « **Reply #43 on:** October 05, 2009, 04:06:09 PM »

Quote from: Ben L on October 05, 2009, 03:49:32 PM

Joe -- I think am coming down Friday. Have a car show for wounded vets at Walter Reed Saturday, and an SCCA Solo event at FedEx Sunday, so cannot make those days.

I will PM you dimensions for the rear trans tunnel pad trapezoid (for the FFR Daytona Coupe) tonight. You can pre-cut the base stock, or do it at the mod meet, your choice, but I'd like the spiffy Goat gel stuff, and charcoal perforated alacantra. Self adhesive 3M tape should stick the thing to powder coated aluminum, right?

Is that OK? Please let me know.

That works. I can cut on the spot.

Ben L · « **Reply #44 on:** October 06, 2009, 07:19:13 AM »

OK. Got the measurements. Piece needs to be 91/2" long. Top (wide) edge of the trapezoid is 97/8", tapering to bottom edge of 9". Weather depending, I may not have the FFR coupe with me, so I am giving you these measurements here. Thanks!

JPM · « **Reply #45 on:** October 06, 2009, 10:35:06 AM »

Thanks. I'll make a note of it.

lil goat · « **Reply #46 on:** October 06, 2009, 10:49:42 AM »

Sounds like Mr. Morfious might be another candidate for the Goat gel, I am not the only one who wants dense foam (IE gel) to match my head. I was thinking put some of the sound deadener under it is really dense and should add a little weight to the console cover, I have a big sheet left over from my doors.

News:

Welcome Guest!!!

Author Topic: MD Mod Meet 6 Install Schedule and Pricing for JPM (Read 20290 times)

Ben L

Ben L

lil goat