Topic: ZOK Sway bar Set Sale

[ShopGMaccessories]

For a limited time I have reduced the price of the say bars when purchased as a set.

Only $ 259.43    Regular Price $288.26

I just added a new front and rear kit with bushings and clamps.




Click the link below to order:

http://www.crateenginedepot.com/store/Solstice-GXP-ZOK-Stabilizer-Package-ZOKBARS-P2500C180.aspx

[lil goat]

That is a sweet deal, might be a good idea for the Super Chargered NA's as well as the GXP's

[kennysabarese]

I bought the rear bar and bushings only on my RL and everything fit fine with the stock clamps.

Those bushings in the pic look shiny, mine were just rubber. Is it just the photo or did I get the wrong thing? Maybe I should get the clamps and compare to what is on my car.

[DeepBlueGXP]

Besides the obvious bennefits, will it take care of the nasty bushing squeak we get in the winter time?

[Uranium-238]

So far, my front bar squeaks, rear doesn't.

[lil goat]

As long as you use the rubber stock bushings the front will squeak, it is not just on our cars. There is a reason Energy Suspension and Prothane make bushings with Zerk fittings. The stock bushings are smooth on the inside so no matter how much grease you put in there it will eventually get squeezed out, and squeak. The aftermarket bushings have grease channels, so the grease does not all get squeezed out. I bet someone makes rubber ones with channels but ours don't have them. For $15.99 you can at least make the bushing easier to lube. Just stick the grease gun on them and 3 pumps and your done. Or you can just pop them off and grease them, only 4 bolts. I do not have the squeak again yet but it is not really cold yet.

[ShopGMaccessories]

I bought the rear bar and bushings only on my RL and everything fit fine with the stock clamps.

Those bushings in the pic look shiny, mine were just rubber. Is it just the photo or did I get the wrong thing? Maybe I should get the clamps and compare to what is on my car.

Just from the flash mostly.

[kennysabarese]

Tom I emailed you about the clamps, can you link directly to just the clamps for me?

[Imaj]

What kind of price can you get us on the ZOK springs? Thanks!

[Johnny-Longtorso]

Is there a post that addresses stock parts -vs- the ZOK parts? I'm trying to determine if this is a worthy upgrade for an 09 Redline. The car will have a belly brace, Pro-Beam, and BC coilovers.

Thanks!

[lil goat]

Lots of them, I have the Pro-Beam, backbone HKS coilovers and the Z0K rear bar with urethane bushing front and rear. I am very happy with the setup, car is very neutral and does not plow like it used to, if you prefer more understeer, get both Z0K bars.

[Johnny-Longtorso]

Thanks LG - I've got (well, will have once I bolt them in) very similar specs - the backbone and probeam, and I opted for the BC coilovers.  Perhaps I'll get the set and try it with just the rear and see how it feels....

[lil goat]

Ben L has the BC's with all the DDM goodies and just the rear Z0K bar, he is also a serious autocrosser he might be a good person to ask for his impressions.