Author Topic: What did you do to your Kappa today! (Read 1192985 times)

Sly Bob · « **Reply #2325 on:** February 10, 2011, 06:15:11 PM »

I was told by Jeff at Solo when he installed my hi flow cat that I wouldn't have trouble passing any emissions test.

smarty · « **Reply #2326 on:** February 10, 2011, 06:15:51 PM »

Quote from: HAMMER DOWN on February 10, 2011, 06:10:35 PM

I payed off my 07 Solstice GXP today in 3yrs. 6mos.

Congrats! Sounds like more $$$ for Mods!!!

HAMMER DOWN · « **Reply #2327 on:** February 10, 2011, 06:33:53 PM »

Yep, Now just have to wait for are Vendors, like DDM to have their Spring SALE.

Mike

elff · « **Reply #2328 on:** February 10, 2011, 06:48:27 PM »

You might want to talk to Kenny about that.
Not sure if he has gotten his to pass yet.
His ready codes won't clear.

DickW · « **Reply #2329 on:** February 10, 2011, 07:15:27 PM »

I have a Solo hiflo cat and mach ezhaust. It passed inspection twice.

Sly Bob · « **Reply #2330 on:** February 10, 2011, 07:57:19 PM »

Kenny has had issues in the past with emmisions testing but that was because he was running a catless downpipe and not the hi-flow cat.

DeepBlueGXP · « **Reply #2331 on:** February 11, 2011, 12:02:28 AM »

Smarty, you may want to talk to Jimmybaja first before ordering a high flow cat and exhaust since you have the NA Coupe.

smarty · « **Reply #2332 on:** February 11, 2011, 12:30:10 AM »

Quote from: DeepBlueGXP on February 11, 2011, 12:02:28 AM

Smarty, you may want to talk to Jimmybaja first before ordering a high flow cat and exhaust since you have the NA Coupe.

The hi flow was for the 08 GXP

1LILNDN · « **Reply #2333 on:** February 11, 2011, 02:14:15 AM »

I got an E-mail from the Dealer today about parts " I ordered "<---Not and didn't . sent this reply

Dear Parts Dept.; You guys have to get your Act together . These parts were Ordered by Koons Service Dept. For My 2008 Solstice GXP. They have had my Car for 3 weeks. Thank You , Robert Preisinger

DeepBlueGXP · « **Reply #2334 on:** February 11, 2011, 07:47:17 AM »

Quote from: smarty on February 11, 2011, 12:30:10 AM

The hi flow was for the 08 GXP

Ah, good choice for the 08 GXP. You'll need a new bung to go with that to be welded into the exhaust. If you have it done at the meet, we can do both.

smarty · « **Reply #2335 on:** February 11, 2011, 08:54:05 AM »

Quote from: DeepBlueGXP on February 11, 2011, 07:47:17 AM

Ah, good choice for the 08 GXP. You'll need a new bung to go with that to be welded into the exhaust. If you have it done at the meet, we can do both.

Any issues that you see with it?

Ok here my newness, what is a bung? Where do I get it?

Sol Asylum · « **Reply #2336 on:** February 11, 2011, 12:11:26 PM »

Quote from: smarty on February 11, 2011, 08:54:05 AM

Any issues that you see with it?

Ok here my newness, what is a bung? Where do I get it?

Don't ask GJ that question you might not like the answer.

A bung in this case is a threaded port for say an O2 sensor.

Critterman · « **Reply #2337 on:** February 11, 2011, 01:42:08 PM »

It is also a stopper for a Beer keg, wine or wiskey barrell. In GJ's cause it is nasty

smarty · « **Reply #2338 on:** February 11, 2011, 02:04:34 PM »

Quote from: Sol Asylum on February 11, 2011, 12:11:26 PM

Don't ask GJ that question you might not like the answer.

A bung in this case is a threaded port for say an O2 sensor.

I thought it was part of a Cheech and Chong movie!!!

DeepBlueGXP · « **Reply #2339 on:** February 11, 2011, 04:11:10 PM »

No No no, that is a Bong, not a bung. When you order the high flow cat, Steve should put it on the list of parts to include.

smarty · « **Reply #2340 on:** February 11, 2011, 05:11:31 PM »

Quote from: DeepBlueGXP on February 11, 2011, 04:11:10 PM

No No no, that is a Bong, not a bung. When you order the high flow cat, Steve should put it on the list of parts to include.

Whew!!! I am glad you clarified that. So, the only thing exhaling will be the exhaust. Unlike our present and a certain past President

JimVonBaden · « **Reply #2341 on:** February 11, 2011, 07:08:14 PM »

I added a pair of springs to my deck lid in anticipation of using the KappaRack:

Then a nice wash in anticipation of a beautiful weekend in the 50's!

Glamor shot:

Jim

Sly Bob · « **Reply #2342 on:** February 11, 2011, 09:30:15 PM »

Picked up the new Oz Ultraleggeras that I bought from the Tire Rack. To the powdercoaters next week.

SHiNY · « **Reply #2343 on:** February 11, 2011, 11:04:54 PM »

Quote from: Sly Bob on February 11, 2011, 09:30:15 PM

Picked up the new Oz Ultraleggeras that I bought from the Tire Rack. To the powdercoaters next week.

Very exciting! Can't wait to see pics

1LILNDN · « **Reply #2344 on:** February 11, 2011, 11:12:38 PM »

Went and picked up my Car Tonight

About 6:30 ,for how long is another ? . My PT pose to be Ready Next week. (New Turbo,Hard Down Pipes. Hawk Pads ,$$$$just to have Fun with Both.

IBDRINKEN · « **Reply #2345 on:** February 12, 2011, 02:28:15 AM »

I bought the Metra GMOS100 Wiring Harness kit, damn thing was expensive...

Dr. Gronk · « **Reply #2346 on:** February 12, 2011, 04:36:11 AM »

I pulled my GReddy boost controller out (anyone what to buy it?) and worked on my fuse box cover. The roads weren't bad so I took it out to crappy tire and around the block a few times... man I can't wait for summer.

1LILNDN · « **Reply #2347 on:** February 12, 2011, 11:03:46 AM »

Dr. Gronk
1. Why did you take out the boost control ? 2.How old is it ?is it .3. Manual or electric?

LRuch · « **Reply #2348 on:** February 12, 2011, 12:04:55 PM »

purchased a gmpp cai my first major mod

SHiNY · « **Reply #2349 on:** February 12, 2011, 01:40:25 PM »

Quote from: LRuch on February 12, 2011, 12:04:55 PM

purchased a gmpp cai my first major mod

Very cool! The first of many!!!

News:

Welcome Guest!!!

Author Topic: What did you do to your Kappa today! (Read 1192985 times)