I'm looking for input from avid detailers and restorers. I have a wide variety of leather seats in my "fleet" of vehicles. I have used Lexol products for many years now, but technology has come a long way and my needs are changing. I had relatively new vehicles with good condition seats and the Lexol line worked well. When I would work on other peoples cars, the cleaner would do a satisfactory job and the conditioner would as well. There has always been one thing I didn't like - the smell.
it is 2018 now and there must be something better out there. I am fine getting several different product for the different needs, but here is where I am at with each vehicle:
2009 Infiniti FX50s - These seats are in overall great shape. They are perforated (heated and cooled) leather that is wearing well so far (about 85K miles) and the interior is black. There are a few minor wear marks and the beginnings of creases. I am looking for a product to restore some softness to the seats, renew the sealant / protectant and generally make sure these seats look good for another 10 years plus.
2004 Infiniti FX35 - The seats are in good shape, great considering the age of the car. 120K miles. The interior is dark brown. I have had two small tears repaired and those areas are not perfect, but hardly visible. The leather is starting to harden and feels rough to the touch in some spots. Almost like it needs to be dusted with 1000 grit wet paper. For these seats I am looking for more of a restoration. I won't need to re-dye the leather, but it does need more grunt work than the newer FX. Again, I want to make sure these seats last another 15 years plus.
1999 BMW 740i - The back seats have some staining and discoloration. The interior is medium to light grey. I am not sure if it is surface staining or truly deep stains. I've cleaned them with simple green and a microfiber, but that wasn't enough in this case. (Side note- I have found diluted simple green and a medium brush to work wonders on quality leather seats! - NEVER use a magic eraser) The front seats have been refinished, though to be honest, it isn't a high quality job. The look great from outside the car, but they feel like crap to the touch. The color match was decent, and this isn't really a show car, so I wasn't too worried. I have to be really careful with the fronts so I don't take off the new finish, but what I would like to find is a product that will soften them to the touch (again, the feel like they need to be hit with 1000 grit) and then a really good sealant / protectant to keep them looking like they do for a while. Retreating every so often is not a problem.
So, what are you using for which application? What have you tried that stunk? Any tips or tricks you have learned?
Yes, I am aware that there are 9 million youtube videos, advertisements and crap. That's why I am turning to you! Real world experience from real (-ish) people.
Thanks in advance.
GJ
