I don't think these pulleys will make much of a difference. They are the same size as stock pulleys, the only difference being that these billet pulleys are about 5 oz lighter. Although a reduction in the rotational mass will result in increased horsepower, I don't think a 5 oz reduction will make much of a difference.
The power gains with under drive pulleys are achieved by a reduction in the diameter of the crankshaft pulley and a larger pulley on the accessories (alternator, ac, ps) thus resulting in a reduction of parasitic loss. It's the same principle as on a bicycle. Lower gears use a smaller drive crank at the pedals and larger ones at the wheel, this reduces the effort required to pedal. The down side is that wheel does not spin as fast. In terms of your car, this means less effort is required by the engine to turn the pulleys on the accessories but the pulleys on the acessories will turn a bit slower. Normally, this is not much of a difference in terms of battery charging or effort required to turn the steering wheel but they typically will add about 5% power gain. Since the power gain is based on the speed of the crank, it is linear as you increase rpm.