Author Topic: OFFICIAL Group Buy on Billet Engine Bay Covers (Read 85934 times)

sol_man · « **Reply #125 on:** February 20, 2009, 12:58:59 PM »

Thanks for the update MRZ and thanks for posting the pics Kim.

Critterman · « **Reply #126 on:** February 20, 2009, 01:47:47 PM »

I've had mine sooooooo loooooong, how long you ask?

That they need to be cleaned already, Mike hurry home.

Cheers · « **Reply #127 on:** February 20, 2009, 04:45:13 PM »

^^^^^^^^^^^^^^^^^^^^^^^^^^^

Squirrel Boy · « **Reply #128 on:** February 20, 2009, 06:10:25 PM »

sweet mine got here today

Cheers · « **Reply #129 on:** February 20, 2009, 06:29:02 PM »

Quote from: Squirrel Boy on February 20, 2009, 06:10:25 PM

sweet mine got here today

Gunnys GXP · « **Reply #130 on:** February 20, 2009, 06:48:17 PM »

Here's Mine,

Yes it's Dirty from my Chicago trip.

GXPinKC · « **Reply #131 on:** February 20, 2009, 07:03:54 PM »

Gunny's GXP, thanks for posting the pictures. They do look AWSOME! With your other touches under the hood, it look's custom. Very nice indeed!

jrsno1fan · « **Reply #132 on:** February 20, 2009, 11:35:18 PM »

Very nice Gunny. I also love your wiring. Thinking I'm going to have to do that in red.

Squirrel - where are your pics???

Deep-GXP · « **Reply #133 on:** February 21, 2009, 05:32:55 PM »

Nice gunny, that looks great! Only one thing wrong i see though.....that big paw print on your engine cover

Dust it off every once in a while

solid · « **Reply #134 on:** February 21, 2009, 05:44:01 PM »

Quote from: Deep-GXP on February 21, 2009, 05:32:55 PM

Nice gunny, that looks great! Only one thing wrong i see though.....that big paw print on your engine cover

I had to go back and see what that was all about hahah

Gunnys GXP · « **Reply #135 on:** February 21, 2009, 07:05:45 PM »

Aw, Come on now, I said it was dirty

. I just took her to Chicago and had to put her right back into the garage before it snowed again. Plus, most of it is sanding dust from the mods I am working on so I will clean it after those are done. Should be starting on the door hinges tomorrow, If I get the speaker upgrades done tonight.

Hey, Does anyone know which wire to the factory amp is the remote line, I am thinking it is the blue one by the power and ground. Most remote lines are blue but you never know. I have the battery disconnected and charging so I can't so the volt meter right now.

Back to the thread topic.

PubliusE · « **Reply #136 on:** February 21, 2009, 09:34:03 PM »

Quote from: MRZ - Performance on February 19, 2009, 08:41:06 PM

Thanks for joining Jessica

UPDATED GROUP BUY ORDERING LIST

1 - Critterman - Paid - Shipped
2 - Kimberly Evans - Paid - Shipped
3 - DeepBlueGXP - Paid - Shipped
4 - Dark Tech - Paid - Shipped
5 - ChuckDoc - Paid - Shipped
6 - JWS0318 - Paid - Shipped
7 - Bruce Simpson - Paid - Shipped
8 - Grant Hales - Paid
9 - Dean Woerner - Paid - Shipped
10- William King - Paid - Shipped
11- Jonathan Belcher - Paid - Shipped
12- Brian Farmer - Paid - Shipped
13- Thomas Bendinelli - Paid - Shipped
14- Sean Marshall - Paid
15- Charles Howard - Paid
16- John Anderson - Paid - Shipped
17- Michael A Walls - Paid - Shipped
18- Stuart Matze - Paid
19- Benjamin Lambiotte - Paid - Shipped
20- SOLID - Paid - Shipped
21- GXPsy Rose - Paid
22- Christopher Wells - Paid
23- Alan Horton - Paid
24- Jessica Richardson - Paid
25-
26-
27-
28-
29-
30-

Thanks to all of you for joining the group buy!

Mine (Matt) were put on order tonight.

Squirrel Boy · « **Reply #137 on:** February 22, 2009, 09:29:26 AM »

Quote from: jrsno1fan on February 20, 2009, 11:35:18 PM

Very nice Gunny. I also love your wiring. Thinking I'm going to have to do that in red.

Squirrel - where are your pics???

As soon as I get off work I'll wash her up (25 hours of overtime this week...)

Go-N Def · « **Reply #138 on:** February 22, 2009, 09:53:03 AM »

That's all? I put in 40+ hours last week, plus came in for another 5 on the weekend for a special project! Wish I was getting paid by the hour...

DeepBlueGXP · « **Reply #139 on:** February 22, 2009, 10:48:23 AM »

Quote from: Gunnys GXP on February 21, 2009, 07:05:45 PM

Aw, Come on now, I said it was dirty . I just took her to Chicago and had to put her right back into the garage before it snowed again. Plus, most of it is sanding dust from the mods I am working on so I will clean it after those are done. Should be starting on the door hinges tomorrow, If I get the speaker upgrades done tonight.

Hey, Does anyone know which wire to the factory amp is the remote line, I am thinking it is the blue one by the power and ground. Most remote lines are blue but you never know. I have the battery disconnected and charging so I can't so the volt meter right now.

Back to the thread topic.

Is is the blue wire, I've installed aftermarket radios on 4 sols and you are correct

Gunnys GXP · « **Reply #140 on:** February 22, 2009, 10:53:08 AM »

Quote from: DeepBlueGXP on February 22, 2009, 10:48:23 AM

Is is the blue wire, I've installed aftermarket radios on 4 sols and you are correct

Thanks, For some reason the Amp (not the factory one) isn't turning on with the dark blue and the line though. I'm going to go ahead and pull the new deck out and splice in behind there. If that doesn't work then I'll know it is the amp as it is not a new one.

PubliusE · « **Reply #141 on:** February 22, 2009, 10:54:21 AM »

Quote from: Gunnys GXP on February 20, 2009, 06:48:17 PM

Here's Mine,

(Image removed from quote.)

Yes it's Dirty from my Chicago trip.

Ok. How did you get the lines straight on the cover? My first attempted caused me to start again.

jrsno1fan · « **Reply #142 on:** February 22, 2009, 02:15:44 PM »

On mine I used a paint pen. Pack of 4 is $5 at walmart. Much easier then a can of paint and a brush.

Gunnys GXP · « **Reply #143 on:** February 22, 2009, 02:21:54 PM »

Quote from: PubliusE on February 22, 2009, 10:54:21 AM

Ok. How did you get the lines straight on the cover? My first attempted caused me to start again.

Like Jrsno1fan said, A paint pen and a steady hand to follow the grooves. The Radiator bottle was the hardest and the squigliest. I should have used tape as a guide on that one.

DeepBlueGXP · « **Reply #144 on:** February 22, 2009, 10:48:13 PM »

Tonight at midnight the sale ends

PubliusE · « **Reply #145 on:** February 22, 2009, 10:55:10 PM »

Quote from: Gunnys GXP on February 22, 2009, 02:21:54 PM

Like Jrsno1fan said, A paint pen and a steady hand to follow the grooves. The Radiator bottle was the hardest and the squigliest. I should have used tape as a guide on that one.

Great tip on the pens. It worked great thanks.

Gunnys GXP · « **Reply #146 on:** February 22, 2009, 11:56:41 PM »

Quote from: PubliusE on February 22, 2009, 10:55:10 PM

Great tip on the pens. It worked great thanks.

Dang, That was quick. You got one and did it already? Well I have been in the garage for the last 9 hours. Man time flies fast when your busy.

PubliusE · « **Reply #147 on:** February 23, 2009, 07:57:50 AM »

Quote from: Gunnys GXP on February 22, 2009, 11:56:41 PM

Dang, That was quick. You got one and did it already? Well I have been in the garage for the last 9 hours. Man time flies fast when your busy.

Yep. I tried the brush method and quickly learned my hand wasn't as steady as it once was. I had already repainted it and was getting the courage to try again. Your tip made it very easy and quick. The medium pen tip fit perfectly in the grooves. Thanks again.

MRZ - Performance · « **Reply #148 on:** February 23, 2009, 09:00:12 AM »

They look really great on your car Gunnys GXP!

I'm glad you guys like them

-----------

We'll get more sets shipped out today or tomorrow

I'll keep you guys posted about it

MRZ - Performance · « **Reply #149 on:** February 24, 2009, 10:08:39 AM »

Thanks William!

UPDATED GROUP BUY ORDERING LIST

1 - Critterman - Paid - Shipped
2 - Kimberly Evans - Paid - Shipped
3 - DeepBlueGXP - Paid - Shipped
4 - Dark Tech - Paid - Shipped
5 - ChuckDoc - Paid - Shipped
6 - JWS0318 - Paid - Shipped
7 - Bruce Simpson - Paid - Shipped
8 - Grant Hales - Paid
9 - Dean Woerner - Paid - Shipped
10- William King - Paid - Shipped
11- Jonathan Belcher - Paid - Shipped
12- Brian Farmer - Paid - Shipped
13- Thomas Bendinelli - Paid - Shipped
14- Sean Marshall - Paid
15- Charles Howard - Paid
16- John Anderson - Paid - Shipped
17- Michael A Walls - Paid - Shipped
18- Stuart Matze - Paid
19- Benjamin Lambiotte - Paid - Shipped
20- SOLID - Paid - Shipped
21- GXPsy Rose - Paid
22- Christopher Wells - Paid
23- Alan Horton - Paid
24- Jessica Richardson - Paid
25- Matt Ferrante - Paid - Shipped
26- William Norton II - Paid
27-
28-
29-
30-

Thanks to all of you for joining the group buy!

News:

Welcome Guest!!!

Author Topic: OFFICIAL Group Buy on ** Billet Engine Bay Covers ** (Read 85934 times)

jrsno1fan

jrsno1fan

Author Topic: OFFICIAL Group Buy on Billet Engine Bay Covers (Read 85934 times)