Author Topic: OFFICIAL Group Buy on Billet Engine Bay Covers (Read 85906 times)

Imaj · « **Reply #200 on:** March 03, 2009, 03:52:18 PM »

When should I be getting mine? It has been awhile. Thanks!

MRZ - Performance · « **Reply #201 on:** March 03, 2009, 04:04:36 PM »

Quote from: Imaj on March 03, 2009, 03:52:18 PM

When should I be getting mine? It has been awhile. Thanks!

The caps have all been shipped at this point. Normal delivery times are from 5-15 business days since we ship thru USPS/Canada Post. We are located in Canada so the shipments getting in the US has to cross the border and they can hold the packages there to inspect them. This can delay the shipping a bit...

Let me know if there is anything I can help you with...

Thanks again!

GXPsy Rose · « **Reply #202 on:** March 03, 2009, 08:49:53 PM »

I'm so excited

Are they here......Are they here......Are they here

Oh, wait they just got shipped

They're not here yet....

But they will be in 5-10 days

sol_man · « **Reply #203 on:** March 04, 2009, 08:22:12 AM »

I was starting to worry but mine came in a few days ago. They are very nice quality and will look great on the car. Now if the weather will just warm up so I can get some work done on her and enjoy driving with the top down!!!

Thanks MRZ!!

GXPsy Rose · « **Reply #204 on:** March 09, 2009, 04:40:20 PM »

They're here! They're here!

I know......I know.....

Have to let the engine cool down as I just got home from work.

But soon.......................

DeepBlueGXP · « **Reply #205 on:** March 09, 2009, 04:41:33 PM »

No you don't they just pop on over top, get out there and install them so we can see the photos

MRZ - Performance · « **Reply #206 on:** March 09, 2009, 04:48:57 PM »

good to see most of you guys got them already and that you like them

GXPsy Rose · « **Reply #207 on:** March 09, 2009, 05:47:51 PM »

Here's a before.......even before I painted her engine cover

Here is the after with the New Orange Engine bay billet covers.....

DeepBlueGXP · « **Reply #208 on:** March 09, 2009, 06:22:33 PM »

Nice!!!! Pretty close match too.

MRZ - Performance · « **Reply #209 on:** March 09, 2009, 08:40:15 PM »

Looks great!

nice job!

I got a good picture of those as well

badbird · « **Reply #210 on:** March 11, 2009, 07:49:32 PM »

THERE HERE....THERE HERE....Ok without further adue, I will post some before and after photos, as you can see, my Dejon CAI is not hooked up as I am awaiting a part due to a minor problem. I was in the process of removing my upper radiator hose, and somehow I struck the CAI with my arm, this in turn caused the damn male nipple (fitting on the air duct that is part of the PCV system)to break. ARRRRR....Just for your info, that air duct piece costs $118.00. And of course, is on back order.

Thanks MRZ, it was worth the wait, I think they look "AWESOME"

Sean

GXPsy Rose · « **Reply #211 on:** March 11, 2009, 08:11:06 PM »

Looks great

DeepBlueGXP · « **Reply #212 on:** March 11, 2009, 08:35:47 PM »

Looks awesome & damn you did a lot of work on those hoses. Can you do a close up of the T by the radiator reservoir.

badbird · « **Reply #213 on:** March 11, 2009, 09:01:57 PM »

you betcha....give me a couple minutes...and I will post one.

Sean

badbird · « **Reply #214 on:** March 11, 2009, 09:07:39 PM »

Here ya go!!!

Cheers · « **Reply #215 on:** March 11, 2009, 09:14:32 PM »

Beautiful

PubliusE · « **Reply #216 on:** March 12, 2009, 12:22:47 AM »

Quote from: badbird on March 11, 2009, 09:07:39 PM

Here ya go!!!

Looks Great! Are those plastic sleeves or Stainless? I just purchased a stainless engine hose sleeving kit from Jegs which I hope to get on this weekend.

badbird · « **Reply #217 on:** March 12, 2009, 05:52:40 AM »

The hose covers themselves are nylon braid. The little slip covers on the ends are anodized aluminum. Good luck with your install, dont break that damn nipple when removing your upper radiator hose like I did.

Sean..

P.S. Thanks for the positive comments. Nothing like having fellow car guys compliment your work!!!!!!

Sly Bob · « **Reply #218 on:** March 12, 2009, 09:40:42 AM »

It is very nice work. Love the way it looks.

BeachParty · « **Reply #219 on:** March 12, 2009, 03:44:25 PM »

Got the caps in and they are awesome! Worth the wait for sure. Mathieu's (MRZ) customer service has been top notch!

We're finishing painting the engine cover this weekend and I'll try to get some pics to post up!

GXPsy Rose · « **Reply #220 on:** March 12, 2009, 06:48:11 PM »

Quote from: BeachParty on March 12, 2009, 03:44:25 PM

Got the caps in and they are awesome! Worth the wait for sure. Mathieu's (MRZ) customer service has been top notch!

We're finishing painting the engine cover this weekend and I'll try to get some pics to post up!

Just remember if you don't post soon you'll get the infamous

BeachParty · « **Reply #221 on:** March 12, 2009, 07:19:27 PM »

Quote from: GXPsy Rose on March 12, 2009, 06:48:11 PM

Just remember if you don't post soon you'll get the infamous

I know, I know!! The pressure is killing me!

PubliusE · « **Reply #222 on:** March 12, 2009, 07:27:02 PM »

I'll help you buy some time by showing off my new caps.

Go-N Def · « **Reply #223 on:** March 13, 2009, 04:49:11 AM »

Nice pic, well put together....

badbird · « **Reply #224 on:** March 13, 2009, 06:52:40 AM »

Looks great, very clean looking.

News:

Welcome Guest!!!

Author Topic: OFFICIAL Group Buy on ** Billet Engine Bay Covers ** (Read 85906 times)

Author Topic: OFFICIAL Group Buy on Billet Engine Bay Covers (Read 85906 times)