Author Topic: Maryland Mod Meet Schedule - 2013 (Read 17453 times)

Dave@DDMworks · « **on:** August 23, 2013, 07:43:03 AM »

Just a week away and wanted to get some of the details worked out here -

I will be coming in on Friday, should be there around noon. I will be doing installs on Friday afternoon, Saturday and a couple maybe early on Sunday, but I need to leave Sunday afternoon.

So this is what i have so far -

Friday -
1lilidn - brake rotors, pads and line install with bleed
Ihawk - Battery, thermostat, bleed brakes

Saturday - Dave
Critter - shock install and alignment
Slybob - Alignment
Dark Tech - water pump and alignment

Saturday - DDM Tech #1
Spartan - Lots of stuff

Sunday -

There will also be a sign up list, basically first come first serve and I will get to as many as possible while I am there. Also, if there is anything specifically you want me to bring for the event, just let me know and it will get packed in.

See you'all soon!
Dave

DeepBlueGXP · « **Reply #1 on:** August 23, 2013, 07:44:50 AM »

Dave, didn't Joe Jr call you about a water pump and alignment?

Dave@DDMworks · « **Reply #2 on:** August 23, 2013, 07:49:03 AM »

Yeap, he did. Just going through all of my notes this morning. Do you know what day is going to work best for him to have it done? Also is he getting the pump or do I need to bring one for him?

Also, it will just be me this year, so you can stuff me wherever you need to.

Thanks!

DeepBlueGXP · « **Reply #3 on:** August 23, 2013, 07:50:34 AM »

Since he works on Friday until 5, I suspect Saturday will work. Will you be bringing the white awnings?

Dave@DDMworks · « **Reply #4 on:** August 23, 2013, 07:53:07 AM »

Great, I will put him on Saturday then.

I was planning on bringing both of the big white tents.

DeepBlueGXP · « **Reply #5 on:** August 23, 2013, 07:53:39 AM »

Awesome. I need you to check out Tim's Pontiac G6 for some potential work. We'll talk when you get here.

Dave@DDMworks · « **Reply #6 on:** August 23, 2013, 07:58:25 AM »

Tim bought a plane?

http://youtu.be/w4s6H4ku6ZY

DeepBlueGXP · « **Reply #7 on:** August 23, 2013, 08:18:25 AM »

haha, Pontiac G6

TomatoSoup · « **Reply #8 on:** August 23, 2013, 09:09:37 AM »

Dave, Can you bring an inner fender/hood weatherstrip trim kit please?

elff · « **Reply #9 on:** August 23, 2013, 09:54:29 AM »

Quote from: Dave@DDMworks on August 23, 2013, 07:58:25 AM

Tim bought a plane?

http://youtu.be/w4s6H4ku6ZY

HAHAHAHAHAHAHA

Damn Tim is doing well for himself

Sol Asylum · « **Reply #10 on:** August 23, 2013, 11:05:31 AM »

Quote from: Dave@DDMworks on August 23, 2013, 07:58:25 AM

Tim bought a plane?

http://youtu.be/w4s6H4ku6ZY

Joe/Dave I have the needed license to work on that G6 just let me know what needs to be done.

ihawk95 · « **Reply #11 on:** August 23, 2013, 12:06:55 PM »

I'm booked with Dave for some work later Friday. GoogleMaps says 7 hrs, so I should be there around 4 pm on Friday.

Dave@DDMworks · « **Reply #12 on:** August 23, 2013, 04:34:24 PM »

Quote from: spartan on August 23, 2013, 08:45:51 AM

Dave,

I have several DDM and Werks products I'd like you to install. I just can't find the time it seems. I'd like to have you put in the Werks radiator and in the process put in a GMPP intake and install your PS repositioning part with new fluid, your oil catch can, and install your cross brace. If you end up having more time than that I can keep you busy with other things! This looks to be at least a two hour block to me. I'd like to do it Saturday if possible. Pls confirm and I will schedule accordingly.

Best, Mark

I just hung up the phone with our newest DDMWorks tech who will be coming up to help us out at the event, so we will be able to get you scheduled in on Saturday. I am sure he will make an introduction on this thread soon enough.

Dave@DDMworks · « **Reply #13 on:** August 23, 2013, 04:35:33 PM »

Quote from: TomatoSoup on August 23, 2013, 09:09:37 AM

Dave, Can you bring an inner fender/hood weatherstrip trim kit please?

Yeap, we will pack some extras and bring them up.

SHiNY · « **Reply #14 on:** August 23, 2013, 05:47:24 PM »

Dave,

I see you are already booked a lot so I'll be happy to have RookieRookie work on my car. I think a caliper may be sticking, not sure. It's still pulling as it was last year. Is it possible to get you to do an alignment for me?

Let me know, I'll make myself available to whoever is available

Thanks!

Critterman · « **Reply #15 on:** August 23, 2013, 06:01:59 PM »

Quote from: SHiNY on August 23, 2013, 05:47:24 PM

Let me know, I'll make myself available to whoever is available

Now you are just trying to make GJ jealous!

SHiNY · « **Reply #16 on:** August 23, 2013, 06:03:54 PM »

Quote from: Critterman on August 23, 2013, 06:01:59 PM

Now you are just trying to make GJ jealous!

Not my fault he wussed out! New meat... I'm in!

elff · « **Reply #17 on:** August 23, 2013, 07:33:26 PM »

Karen
I still have all 4 of my stock calipers.
If we can figure out which one is bad we can swap in a good one then re-bleed the brakes.
At least this time I will know that you arent taller than me. It was Kelu

I still laugh about that

SHiNY · « **Reply #18 on:** August 23, 2013, 07:43:01 PM »

That would be awesome!! Thank you so much!

I <3 Elff

Sol Asylum · « **Reply #19 on:** August 23, 2013, 07:49:30 PM »

Quote from: elff on August 23, 2013, 07:33:26 PM

Karen
I still have all 4 of my stock calipers.
If we can figure out which one is bad we can swap in a good one then re-bleed the brakes.
At least this time I will know that you arent taller than me. It was Kelu

I still laugh about that

Are you sure Shiny isn't taller than you?

elff · « **Reply #20 on:** August 23, 2013, 07:59:13 PM »

Well, ummm,
But at least not so tall that I cant reach her brake pedals

SA
Your mission is to make sure we pack the calipers before we drive down to the mm

solli · « **Reply #21 on:** August 23, 2013, 08:01:43 PM »

I ordered the ProBeam and LV's brace which arrived yesterday so the hubs decided that he'd do the honors and install both. Glad for it, since it seems Dave already has his hands full. The car rides on rails and I love it!

We did discover one thing as we read through the instructions: it's a lot easier just to remove the rubber air box on the driver's side that clamps to the 'hose that leads under the engine cover than it is to try to work around it. We just pulled the box off the bushing pins, then followed the rest of the directions.

Anyone know the right term for that '06 air box thing?

Sol Asylum · « **Reply #22 on:** August 23, 2013, 08:15:43 PM »

Quote from: elff on August 23, 2013, 07:59:13 PM

Well, ummm,
But at least not so tall that I cant reach her brake pedals

SA
Your mission is to make sure we pack the calipers before we drive down to the mm

No problem I have a set of calipers at work they measure mm and inches, since they are assigned to me no one will notice them missing. No GJ those calipers don't measure millipeters.

DDM Dave is your new rookie smart enough not to listen to GJ? That last rookie was pretty gullible.

Gentleman Jack · « **Reply #23 on:** August 24, 2013, 12:01:20 AM »

A new rookie? Is he a red head again?

Ok, ok... It's me. I'm the new DDM employee. Ivy just couldn't resist hiring me.

Sol Asylum · « **Reply #24 on:** August 24, 2013, 12:28:05 AM »

Wait do you have red hair? I seam to recall seeing an ID for you that made me think future America's most wanted star, but I don't remember red hair.

News:

Author Topic: Maryland Mod Meet Schedule - 2013 (Read 17453 times)