Author Topic: New WERKSracing Tubular Front and Rear Adjustable Sway Bars group buy pre order! (Read 90546 times)

Gentleman Jack · « **Reply #75 on:** October 23, 2013, 08:56:26 PM »

Critter-

I'm all in. Except, I don't have a kappa, so I'm all out.

ChopTop · « **Reply #76 on:** October 24, 2013, 07:09:49 AM »

The government cannot afford another shutdown please stopping holding us swaybar wanters hostage. Come to the negotiating table and commit to buy! If not for us do it for the children.

werks · « **Reply #77 on:** October 24, 2013, 10:38:02 AM »

Quote from: ChopTop on October 24, 2013, 07:09:49 AM

The government cannot afford another shutdown please stopping holding us swaybar wanters hostage. Come to the negotiating table and commit to buy! If not for us do it for the children.

Not to worry we should have it filled by this weekend for sure!

werks · « **Reply #78 on:** October 26, 2013, 08:51:27 AM »

2 more needed and we can close this group buy up!!!

1LILNDN · « **Reply #79 on:** October 26, 2013, 02:00:31 PM »

Dave ; sent you E-Mail

werks · « **Reply #80 on:** October 26, 2013, 02:12:06 PM »

Quote from: 1 LIL NDN on October 26, 2013, 02:00:31 PM

Dave ; sent you E-Mail

Okay I'll check in a bit sir.

Sly Bob · « **Reply #81 on:** October 26, 2013, 04:20:36 PM »

Sent money Dave, add me to the list (again).

werks · « **Reply #82 on:** October 26, 2013, 05:17:08 PM »

Quote from: Sly Bob on October 26, 2013, 04:20:36 PM

Sent money Dave, add me to the list (again).

You the man Bob!

Sent from my iPad using Tapatalk - now Free

cdnite · « **Reply #83 on:** October 27, 2013, 08:56:05 PM »

Dave I'm calling tomorrow to make a payment for these swap bars so add me to the list!

--Christian

werks · « **Reply #84 on:** October 28, 2013, 11:24:46 AM »

Christian - You are on the list!!!

werks · « **Reply #85 on:** October 28, 2013, 11:27:41 AM »

1 LIL NDN added as well, thanks guys, this group buy is now closed, final order will be placed this afternoon and I will update with expected ETA on these, thanks again all!!!

JoshMcMadMac · « **Reply #86 on:** October 28, 2013, 03:17:23 PM »

Great news. So...about the grease zerks?

werks · « **Reply #87 on:** October 28, 2013, 03:25:43 PM »

Quote from: JoshMcMadMac on October 28, 2013, 03:17:23 PM

Great news. So...about the grease zerks?

The manufacturer cannot supply them with the grease Zerk brackets, what I am going to do is once the bars arrive here I am going to measure out the brackets and see if I can source them from another bushing manufacturer like Prothane or Energy, then I will most likely make it an option to purchase the bars with or without the greasable brackets.

Sly Bob · « **Reply #88 on:** October 28, 2013, 03:54:56 PM »

We could always just do this with the hardware that Dave supplies but I too might spring for an upgrade depending on cost.
http://www.kappaperformance.com/forum/index.php/topic,6246.msg88668.html#msg88668

werks · « **Reply #89 on:** October 28, 2013, 04:27:18 PM »

Yes sir, that is the way to do it! If you want to DIY.

cdnite · « **Reply #90 on:** October 28, 2013, 06:13:05 PM »

Dave I tried calling but could get through so I used the contact form on the website and submitted my contact information.

--Christian

werks · « **Reply #91 on:** October 28, 2013, 06:33:55 PM »

Got it, thanks Christian!

Quote from: cdnite on October 28, 2013, 06:13:05 PM

Dave I tried calling but could get through so I used the contact form on the website and submitted my contact information.

--Christian

JoshMcMadMac · « **Reply #92 on:** November 11, 2013, 10:36:18 AM »

What is the ETA on shipping these?

werks · « **Reply #93 on:** November 11, 2013, 11:32:53 AM »

I will find out this week and post it up here as the guys are just getting back from SEMA today...

JoshMcMadMac · « **Reply #94 on:** November 17, 2013, 10:05:03 AM »

Quote from: werks on November 11, 2013, 11:32:53 AM

I will find out this week and post it up here as the guys are just getting back from SEMA today...

...

werks · « **Reply #95 on:** November 18, 2013, 12:35:19 PM »

We are looking at delivery of our order somewhere around the 15th of December, sorry they got pushed back a bit guys, we made a last minute change to a part of the on the rear bars and with SEMA our manufacturer really got a bit behind.

Sly Bob · « **Reply #96 on:** December 08, 2013, 11:26:26 AM »

Are we still on track to get these out on or about the 15th? It'd be nice to see these under the Christmas tree.

JoshMcMadMac · « **Reply #97 on:** December 10, 2013, 08:32:41 AM »

Quote from: Sly Bob on December 08, 2013, 11:26:26 AM

Are we still on track to get these out on or about the 15th? It'd be nice to see these under the Christmas tree.

Werks? Bueller? Anyone? I am wondering as well, as it would be nice to get these installed over the holiday. You have had payment for two and a half months and slipped shipping a month and a half...you could at least keep us in the loop!

werks · « **Reply #98 on:** December 10, 2013, 10:02:54 AM »

Thank you for contacting me. I did receive your PMs and I put a call into the manufacturer on Monday. I have not yet heard back but as of our last conversation, yes we are looking to ship these before Christmas.

Sorry for the delays, right now I am at their mercy

Sly Bob · « **Reply #99 on:** December 12, 2013, 10:24:35 PM »

I'm assuming you have called them back now for an update?

News:

Welcome Guest!!!

Author Topic: New WERKSracing Tubular Front and Rear Adjustable Sway Bars group buy pre order! (Read 90546 times)