Author Topic: What did you do to your Kappa today! (Read 1263584 times)

Critterman · « **Reply #4225 on:** June 10, 2011, 08:54:06 AM »

GJ - How would we spot the difference in Mike? These are his normal behavior paterns:

cold, clammy skin;
confusion, hallucinations, unusual thoughts or behavior;
severe dizziness

smartin · « **Reply #4226 on:** June 10, 2011, 09:12:43 AM »

Quote from: Arabas on June 10, 2011, 06:37:18 AM

i washed the top and when it dried up, i detailed it with Meguiar's convertible weather proof. BUT the damn can got empty, so i left a small part of the top unsprayed

u can't imagine how difficult is to find this damn product here....

I need to do this to my convertible top. I will try to find this brand here. Thanks for the reminder.

Arabas · « **Reply #4227 on:** June 10, 2011, 09:17:54 AM »

http://cgi.ebay.co.uk/Meguiars-Convertible-and-Cabriolet-Weatherproofer-/110590443849?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item19bfb44149

Here is the product i used Susan...

must find some more asap to finish what i started

smartin · « **Reply #4228 on:** June 10, 2011, 09:35:28 AM »

Thanks, George! I think I've seen that at the auto parts store.

Good luck getting your top completed!

JimVonBaden · « **Reply #4229 on:** June 10, 2011, 09:44:27 AM »

Quote from: smartin on June 10, 2011, 09:35:28 AM

Thanks, George! I think I've seen that at the auto parts store.

Good luck getting your top completed!

I've never seen the weather proofer, but I have seen the cleaner at the auto parts store.

If you find it let me know where.

Thanks,

Jim

smartin · « **Reply #4230 on:** June 10, 2011, 10:31:14 AM »

I sure will, Jim.

Arcrider · « **Reply #4231 on:** June 10, 2011, 10:38:33 AM »

Let's see,

Washed and waxed w/ the Griott's garage system, put mud flaps on the rear, and dropped a handgun on the fender putting a dime size dent in it! Next step is to call a paintless dent remover company, unless anyone knows how to remove it! Ouch!

Gentleman Jack · « **Reply #4232 on:** June 10, 2011, 10:45:38 AM »

Quote from: Arcrider on June 10, 2011, 10:38:33 AM

Let's see,

Washed and waxed w/ the Griott's garage system, put mud flaps on the rear, and dropped a handgun on the fender putting a dime size dent in it! Next step is to call a paintless dent remover company, unless anyone knows how to remove it! Ouch!

Reach in from underneath, aim handgun at said dent, pull trigger. You will no longer have a dent. Your results depend totally on your aim and the caliber of the weapon.

reedred · « **Reply #4233 on:** June 10, 2011, 12:05:15 PM »

Thanks to this thread, scheduled a Formula 303 roof treatment for the weekend. I found this great service that will come to the house and do it in my driveway!

Sly Bob · « **Reply #4234 on:** June 10, 2011, 12:10:36 PM »

Quote from: Arcrider on June 10, 2011, 10:38:33 AM

...dropped a handgun on the fender putting a dime size dent in it! Next step is to call a paintless dent remover company, unless anyone knows how to remove it! Ouch!

Let the pros take it out. Paintless dent repair in my experience is money well spent.

SHiNY · « **Reply #4235 on:** June 10, 2011, 01:27:38 PM »

Quote from: reedred on June 10, 2011, 12:05:15 PM

Thanks to this thread, scheduled a Formula 303 roof treatment for the weekend. I found this great service that will come to the house and do it in my driveway!

Your service would like to inform you that you have plenty of 303 cleaner, but you should purchase more 303 water repellent before the service arrives.

And by "do it" he means treat the roof with Formula 303

reedred · « **Reply #4236 on:** June 10, 2011, 01:55:25 PM »

Doing the other on asphalt in 90+ degree weather honestly didn't occur to me, though I suppose you'll expect to be entertained between coats.

Would the pool table suffice? I had the felt coated with Teflon.

shabby · « **Reply #4237 on:** June 11, 2011, 11:49:26 AM »

Forgestar's meet hoosiers

elff · « **Reply #4238 on:** June 11, 2011, 12:02:58 PM »

WHERES MY COOKIE?!?!?!?!?

Those look sweet.

What is the weight of the rims? and are they 18x9s?

spartan · « **Reply #4239 on:** June 11, 2011, 12:04:45 PM »

Impressive - looks tough. This set-up is just for the track I take it? What are the sizes and offsets?

J_Bond · « **Reply #4240 on:** June 11, 2011, 12:21:41 PM »

Forgestars!!!! NICE!!! one of my favorite wheels!!! only weigh 18-19lbs right? flow-formed cast technology. what's your offset? I'd like mine a little more flush. I'm torn between those and the Enkei PF01's... same weight, but the Forgestars are sexier for sure.

Another coat of ZAINO today with Zaino car-show detailing spray.... beautiful.... She's not the fastest car on the road, but certainly the best-looking!

elff · « **Reply #4241 on:** June 11, 2011, 12:49:30 PM »

J_Bond
Those are 315s. Aint no way to keep them 100% flush without body mods

shabby · « **Reply #4242 on:** June 11, 2011, 02:52:22 PM »

Size is 18x11 with a 50mm offset plus 1" spacer in the back, they weigh 21lbs, tires are 315/30/18's.
They're definitely race only, wouldn't want to drive with them on the street.

Oops i just had to

Yogi · « **Reply #4243 on:** June 11, 2011, 03:09:28 PM »

Quote from: shabby on June 11, 2011, 02:52:22 PM

Size is 18x11 with a 50mm offset plus 1" spacer in the back, they weigh 21lbs, tires are 315/30/18's.
They're definitely race only, wouldn't want to drive with them on the street.

Oops i just had to

Shabby, I'm curious as to why you decided to use the spacer. Was the offset that you needed not available?

smartin · « **Reply #4244 on:** June 11, 2011, 03:23:10 PM »

Not too shabby!

Drove mine out the Prince William Parkway and Fairfax County Parkway. Gorgeous day.

shabby · « **Reply #4245 on:** June 11, 2011, 03:38:00 PM »

Quote from: Yogi on June 11, 2011, 03:09:28 PM

Shabby, I'm curious as to why you decided to use the spacer. Was the offset that you needed not available?

I could of gotten any offset i wanted, i got the spacer because without it the rear wheels wouldn't fit. The front fits fine though so no spacer needed.

elff · « **Reply #4246 on:** June 11, 2011, 03:42:18 PM »

Too funny shabby
Bet that got some funny looks as well as thumb ups

Yogi · « **Reply #4247 on:** June 11, 2011, 03:43:54 PM »

Quote from: shabby on June 11, 2011, 03:38:00 PM

I could of gotten any offset i wanted, i got the spacer because without it the rear wheels wouldn't fit. The front fits fine though so no spacer needed.

Now I see! Thanks, Shabby!

CPB · « **Reply #4248 on:** June 11, 2011, 03:53:38 PM »

just got home from car show fist in class hope we can do as well tomarrow. All Pontiac show at Bill Rapp in Syracuse NY

smartin · « **Reply #4249 on:** June 11, 2011, 03:55:03 PM »

Congrats CPB

News:

Author Topic: What did you do to your Kappa today! (Read 1263584 times)