Author Topic: What did you do to your Kappa today! (Read 1262931 times)

Critterman · « **Reply #4425 on:** June 24, 2011, 08:21:57 AM »

I thought you had gotten your ears fixed Elff? Your recent avatar shows that they are back.

elff · « **Reply #4426 on:** June 24, 2011, 08:27:48 AM »

apparently I should have taken out a warranty on the Pin job.
Stupid Dr.

ihawk95 · « **Reply #4427 on:** June 24, 2011, 08:31:53 AM »

Don't you hate when that happens?

Carbon Sky · « **Reply #4428 on:** June 24, 2011, 09:11:49 AM »

Quote from: elff on June 24, 2011, 08:19:34 AM

For the above situation, I pretty much agree, but there are situations where visual inspection can tell you alot
For example
My Front Axle oil in my Jeep was a Murky white Tan.
Rear Axle was a dark brown almost black.

Conclusion, Water contamination in the front axle, bad inner axle seals.

Solution, replace in axle seals

Fair enough. Yes, if you get some massive amount of oil contamination, i.e. coolant leak, or some other major water intrusion . . . for the most part, you can't really tell anything about oil until you get an oil analysis

S.P. · « **Reply #4429 on:** June 24, 2011, 09:41:56 AM »

I only stated that the color difference between the oils just as an observation. I didn't expect any of the oils to still have their purple color; it was a little suprising. I didn't mean to insinuate that the engine oil was worn down any further than what would be considered normal. My goal for the engine was just to change the oil, not compare products. I agree, a oil analysis test would be best for that.

My comparison will be for the redline oil I put in the tranny and diff vs the royal purple that came out; that was unclear in my earlier post. Sorry for the confusion.

Sly Bob · « **Reply #4430 on:** June 25, 2011, 05:36:20 AM »

Installed my oil catch can from DDM last night. Had to move the rubber feet as they weren't in contact with anything in their stock locations.

elff · « **Reply #4431 on:** June 25, 2011, 10:18:18 AM »

Welcome to my world.
I run into that all time in conference rooms.

Sly Bob · « **Reply #4432 on:** June 25, 2011, 12:13:14 PM »

elff · « **Reply #4433 on:** June 25, 2011, 12:35:40 PM »

Time to finish drilling out the upper mounts for the Koni's
Hopefully next post will have pics of the Eibachs mounted on the Koni shocks and ready for install onto the Sky

TomatoSoup · « **Reply #4434 on:** June 25, 2011, 08:03:02 PM »

Went down to FrictionFighter's today to pick up the Boomerang I bought from him (out of his drifter Sol). He has the absolute CUTEST little dog! We have 4 dogs at home - two Siberians a Border Collie and a Sheltie - and I don't normally like small dogs (I don't much like the Sheltie as a matter of fact). But FF's tiny dog was an absolute darling.

Aspenrose · « **Reply #4435 on:** June 25, 2011, 08:38:35 PM »

washed BoB, clay barred the fascia and hood, in prep for clear bra, more to do, found pin prick sized paint specks, clay bar hardly touched em

any ideas??
got the wind restrictor in, not wired yet, need a switch anyways before I do it. borrowed Kenny's JPM console, undecided on color scheme, but leaning towards black with silver, and less red. cup holder is totally awry, maybe tomorrow open up the dash and see if I can get it back where it belongs...or rip it out altogether.

EarthNTX · « **Reply #4436 on:** June 25, 2011, 08:51:24 PM »

Washed and waxed (to death) mine and then I saw l'il chips..they drive alot of pickups around where I live and of course..if there's a teeny weeny stone, it'll hit me. grrrr

Go-N Def · « **Reply #4437 on:** June 26, 2011, 01:14:06 AM »

Quote from: Aspenrose on June 25, 2011, 08:38:35 PM

washed BoB, clay barred the fascia and hood, in prep for clear bra, more to do, found pin prick sized paint specks, clay bar hardly touched em any ideas??
got the wind restrictor in, not wired yet, need a switch anyways before I do it. borrowed Kenny's JPM console, undecided on color scheme, but leaning towards black with silver, and less red. cup holder is totally awry, maybe tomorrow open up the dash and see if I can get it back where it belongs...or rip it out altogether.

What brand of claybar are you using? They are not created eual....

IBDRINKEN · « **Reply #4438 on:** June 26, 2011, 02:11:35 AM »

walked out to go to work tonight and noticed that I had a flat tire and a big ass screw in the thread. I have not drivnen it in 3 weeks..

elff · « **Reply #4439 on:** June 26, 2011, 08:11:09 AM »

Damn dude
WHat did you do to that screw to piss it off and make it follow you home then?

Aspenrose · « **Reply #4440 on:** June 26, 2011, 10:03:42 AM »

Quote from: Go-N Def on June 26, 2011, 01:14:06 AM

What brand of claybar are you using? They are not created eual....

today's clay bar, or yesterday's, was the Ice one

Gentleman Jack · « **Reply #4441 on:** June 26, 2011, 10:06:50 AM »

Quote from: elff on June 26, 2011, 08:11:09 AM

Damn dude
WHat did you do to that screw to piss it off and make it follow you home then?

It wasn't me I swear!

smartin · « **Reply #4442 on:** June 26, 2011, 10:08:47 AM »

Took it out on the G W Parkway to enjoy a celebration with a Sky owner!

kennysabarese · « **Reply #4443 on:** June 26, 2011, 10:12:27 AM »

Last night was our final night out in Austin. I'm gunna miss this place!

Check out Facebook...

Yogi · « **Reply #4444 on:** June 26, 2011, 10:31:18 AM »

Quote from: Kenny on June 26, 2011, 10:12:27 AM

Last night was our final night out in Austin. I'm gunna miss this place!

Check out Facebook...

Got a link?

Go-N Def · « **Reply #4445 on:** June 26, 2011, 10:35:41 AM »

Quote from: Aspenrose on June 26, 2011, 10:03:42 AM

today's clay bar, or yesterday's, was the Ice one

The off-the-shelf ones aren't that great. I much prefer the one's that PBW makes. You can order from their website and have it delivered in 3-4 days. I got the 3-pack deal from them and and combined them together into one big ball. It does wonders with Spray and Wipe.

http://www.poorboysworld.com/claybars.htm

Aspenrose · « **Reply #4446 on:** June 26, 2011, 10:58:23 AM »

Quote from: Go-N Def on June 26, 2011, 10:35:41 AM

The off-the-shelf ones aren't that great. I much prefer the one's that PBW makes. You can order from their website and have it delivered in 3-4 days. I got the 3-pack deal from them and and combined them together into one big ball. It does wonders with Spray and Wipe.

http://www.poorboysworld.com/claybars.htm

thanks! appreciate the recommendation!

JimmyBaja · « **Reply #4447 on:** June 26, 2011, 11:00:37 AM »

Detailed it & took it out for a drive toppless...

ihawk95 · « **Reply #4448 on:** June 26, 2011, 11:40:25 AM »

I thought about getting the Sol out today, but the radio called for rain. And of course it's perfectly sunny.

I might take it out after work later. It needs a bath...bad.

ophidia31 · « **Reply #4449 on:** June 26, 2011, 02:37:21 PM »

Gave it a good cleaning and then out to the state park for a good picture since I didnt have one yet.

News:

Author Topic: What did you do to your Kappa today! (Read 1262931 times)