Author Topic: Flags for the Solstice Buttress (Read 24365 times)

DeepBlueGXP · « **on:** December 28, 2008, 08:40:31 PM »

I received a pair of flags that KYGXP was working with for the SEM in Lexington. There was a minor change made to allow it to hold onto the release wire. At 45 they began to vibrate and become loose,, so I modified the flag mount and the bottom now holds firm. I tested them to 70mph today

For those of you who have been to my place, you'll recognize the roads. Everyone else can be jealous

, the day temps topped off at 75F. Great top down weather.

http://www.youtube.com/watch?v=duodvV4kDuo

Cheers · « **Reply #1 on:** December 28, 2008, 08:49:00 PM »

WOW Have to try mine with your mod.....DBG strikes again...the new plugs helped too. Is that Dark Tech in chase from the beach? Didn't see any bikini girls this time either

Nice JPM hat!!

Got a call for the guy who makes these tonight -- Have to give him credit for following up and wanting to make the best product possible...w/DBG's help

DeepBlueGXP · « **Reply #2 on:** December 28, 2008, 10:04:44 PM »

I spent some time talking to that guy also. He asked me to post my fix for any of you who have the flag caddie, the base has a (for the lack of better words) a nipple that sits into the buttress. Cut 1/2 of the thickness of the nipple off. Since the design change to the lower section was knotched on a 45 degree to hold the pin in the buttress, the grip edge became lower by the same thickness of the new knotch. Cutting off 1/8 inch of the nipple allows the screw to tigthen enough to firmly hold onto the pin without bottoming out. Do not over tigthen as the base will turn off the pin and possible launch off the car at speeds.

These flags were intended for parades, so cruising down the drag strip or lonely road at speeds greater than posted may cause the flag to depart the vehicle.

Sly Bob · « **Reply #3 on:** December 28, 2008, 11:18:16 PM »

They stayed on really well Joe. When I was down to your place this summer I know that those roads around your place should make anyone living within 100 mile radius of the Tail of the Dragon extremely jealous.

Nice video, nice day and nice hat.

KYGXP · « **Reply #4 on:** December 28, 2008, 11:44:11 PM »

Wow this is great.... I was one of the first ones to have his flags and I want to drive with mine on as well.....

Thanks...... I will try the fix this weekend....

This is me Driving the Dragon with one of them on in May.... I was going about 30 mph

DeepBlueGXP · « **Reply #5 on:** December 29, 2008, 05:11:37 PM »

The first picture shows the stock end of the flag caddie with the threaded in retainer

The second picture shows what to be cut off. Remove the threaded retainer before cutting.

Whip · « **Reply #6 on:** December 29, 2008, 05:21:57 PM »

I know those roads......and I also know the car behind you.

Go-N Def · « **Reply #7 on:** December 29, 2008, 05:32:27 PM »

I like where they're mounted on our cars a lot better than where they go on the Corvette!

RUTurbo · « **Reply #8 on:** December 29, 2008, 07:09:37 PM »

Super nifty, going to have to get some for myself come spring time!

CPB · « **Reply #9 on:** December 29, 2008, 08:27:50 PM »

where can I get these flags and holders? What is the cost? I would love to have a set for this summer
Guess I should read all new posts first found vendor site

Sly Bob · « **Reply #10 on:** December 29, 2008, 09:07:26 PM »

I wonder if he stocks any flags other than U.S. flags?

Cheers · « **Reply #11 on:** December 29, 2008, 09:10:14 PM »

Doug Schiller makes them. He can be found at http://www.flagcaddie.com/paypalForm1.asp

They also make custom flags. KYGXP had some made with her Meet logo etc.
http://www.flagcaddie.com/CustomFlags.asp Would like to have a set for my Dad

DeepBlueGXP · « **Reply #12 on:** December 29, 2008, 09:15:22 PM »

You can click his banner on the right side of the forum to get to his web site.

KYGXP · « **Reply #13 on:** December 29, 2008, 11:10:32 PM »

Quote from: Cheers on December 29, 2008, 09:10:14 PM

Doug Schiller makes them. He can be found at http://www.flagcaddie.com/paypalForm1.asp

They also make custom flags. KYGXP had some made with her Meet logo etc.
http://www.flagcaddie.com/CustomFlags.asp Would like to have a set for my Dad

chuckdoc · « **Reply #14 on:** December 30, 2008, 10:02:28 AM »

Quote from: Cheers on December 29, 2008, 09:10:14 PM

Doug Schiller makes them. He can be found at http://www.flagcaddie.com/paypalForm1.asp

They also make custom flags. KYGXP had some made with her Meet logo etc.
http://www.flagcaddie.com/CustomFlags.asp Would like to have a set for my Dad

Yup, need to think of our Canadian friends. I hope they have forgiven us(US) from attacking them in 1812. They actually kicked our butt and burned Detroit. BTW, if you guys want it, you can have it now. Ya just need to make some improvements.

Chuck

SHEZOOMM · « **Reply #15 on:** December 30, 2008, 10:17:49 AM »

Most Canadian Flags sold at Home Hardware, CTC stores will fit.
Get your Flag Caddie Kit first...
If you have a problem PM me...
Peter

smartin · « **Reply #16 on:** December 30, 2008, 10:47:30 AM »

We need to get flags for the St. Patrick's Day Parade.

DeepBlueGXP · « **Reply #17 on:** December 30, 2008, 10:50:38 AM »

Perhaps a group buy!!! What design do you want?

chuckdoc · « **Reply #18 on:** December 30, 2008, 10:55:22 AM »

A little green flag with a leprechaun on it maybe. No Joe, I will not pose for a picture and I am not wearing that stupid green hate.

DeepBlueGXP · « **Reply #19 on:** December 30, 2008, 11:01:12 AM »

But... It would be a life size photo

smartin · « **Reply #20 on:** December 30, 2008, 11:40:05 AM »

LOL

I don't know. Let's put our heads together and think of something good.

Quote from: DeepBlueGXP on December 30, 2008, 10:50:38 AM

Perhaps a group buy!!! What design do you want?

Cheers · « **Reply #21 on:** December 30, 2008, 12:29:59 PM »

I'm in ---Chuck, you need to reconsider -- at least grow a beard.......

SHEZOOMM · « **Reply #22 on:** December 30, 2008, 01:22:27 PM »

Like this.....

Cheers · « **Reply #23 on:** December 30, 2008, 01:51:59 PM »

SMARTIN -- Maybe time to start a new thread for Washington DC St. Patrick's Day Parade - ?????, March ??, 2009 not sure when the Parade is since THE DAY in on a Tuesday in 2009

Photos say it all:
What it is all about
Last year's LOGO
The Leprechaun and Herself

smartin · « **Reply #24 on:** December 30, 2008, 02:01:48 PM »

Or this

News:

Author Topic: Flags for the Solstice Buttress (Read 24365 times)