Author Topic: Solstice Recessed Grills (Read 280292 times)

Sol Asylum · « **on:** October 26, 2012, 10:34:40 PM »

Here you go Bob. Took about 40 min to draw in Solidworks 06, had to remember how to use the older version which is what I have at home. Of course this is just a guess at the size and is lacking things like draft and installation tabs. A production model shouldn't take more than a few hours to do it's collecting the data from the car to make it work that would take the most time. Anyone have a 3d scan of the Solstice to work with?

Sol Asylum · « **Reply #1 on:** October 27, 2012, 11:23:41 AM »

Like I said those are just a guess dimensionally speaking and I would be very surprised if they would work as is. As far as production I would get a set stereo lithed and then make some casting molds from them, I've done that kind of thing before. For me it's kind of a lack of time keeping me from doing things like this.

Dave@DDMworks · « **Reply #2 on:** October 27, 2012, 12:18:10 PM »

Quote from: Sol Asylum on October 27, 2012, 11:23:41 AM

Like I said those are just a guess dimensionally speaking and I would be very surprised if they would work as is. As far as production I would get a set stereo lithed and then make some casting molds from them, I've done that kind of thing before. For me it's kind of a lack of time keeping me from doing things like this.

I bet a full CAD model of the front bumper would make it a little easier

Sol Asylum · « **Reply #3 on:** October 27, 2012, 12:22:52 PM »

Yeah that would help, what kind of file is that and what are my chances of getting a copy?

Dave@DDMworks · « **Reply #4 on:** October 27, 2012, 12:27:39 PM »

Quote from: Sol Asylum on October 27, 2012, 12:22:52 PM

Yeah that would help, what kind of file is that and what are my chances of getting a copy?

I have it in .xt and .igs, the .xt is 86mb and the .igs is 231mb, so not going to be able to email it to you

As for your chances of getting a copy, I would like 1 chocolate sprinkle doughnut from Krispy Kreme delivered and it is all yours

Actually, I will see if we can host it on our ftp server and if so I can shoot you over a link via PM.

Sol Asylum · « **Reply #5 on:** October 27, 2012, 01:20:24 PM »

That would work. We don't have Krispy Kreme here in Central Hellinois so we might have to work something else out for payment. I might be able to get one of those Elff repellent kids toys would that work? Oh wait he pays you money doesn't he?

1LILNDN · « **Reply #6 on:** October 27, 2012, 09:31:11 PM »

WOW this thread Took a real turnabout . Went from ( New LNF Aftermarket Manifold!!! Check it Out ) to Making Grills .

=============== " Now this is a real derailment " =============

Carbon Sky · « **Reply #7 on:** October 31, 2012, 06:47:10 PM »

Quote from: Arabas on October 26, 2012, 12:48:48 AM

Critter, we only have them for workstations. i know there are Quadro NVS for laptops, not sure the FX series can be used for laptops. you are probably right, the fx quadro (q series now) can only be used in workstation. i have a 2000 for my use, but never actually used it since i know nothing about cad

Hey, just confirmed my vid card is an Nvidia NVS 4200M. I was quoting you what this laptop usually comes with, but apparently this isn't the usual configuration.

Sly Bob · « **Reply #8 on:** October 31, 2012, 08:09:15 PM »

Recessed grills? If you do it I want a set for sure. I have a set of the Aftershock ones that I can uninstall if someone needs them to help with design. They aren't a perfect fit but might help.

Sly Bob · « **Reply #9 on:** October 31, 2012, 08:11:20 PM »

The Aftershock grills fit differently on the GXP than they did on the NA. If I remember correctly, they stuck out a little farther on the bottom with the NA.

Sol Asylum · « **Reply #10 on:** October 31, 2012, 08:20:20 PM »

We will see Bob, I still don't have the front bumper file from Dave.

1LILNDN · « **Reply #11 on:** October 31, 2012, 09:43:32 PM »

I thought the GXP grills were a different size Not so !

Sol Asylum · « **Reply #12 on:** October 31, 2012, 10:07:58 PM »

I wonder if Dave has the CAD file for the GXP too?

Critterman · « **Reply #13 on:** November 01, 2012, 08:56:19 AM »

I believe he does, and there is a difference in the curve of the GXP and N/A grills.

ChopTop · « **Reply #14 on:** November 01, 2012, 08:57:08 AM »

Far as I know Rudy is only person who has the actual 3D/CAD recessed grills files. Would it be an option to see if he'd supply or sell them? I have a unused set, but not even sure a college with a 3D printer would be willing to scan them, let alone knowing the charge to produce a CAD file.

Dave@DDMworks · « **Reply #15 on:** November 01, 2012, 09:01:54 AM »

Quote from: Sly Bob on October 31, 2012, 08:11:20 PM

The Aftershock grills fit differently on the GXP than they did on the NA. If I remember correctly, they stuck out a little farther on the bottom with the NA.

The grills are the same on the NA and the GXP, on the NA the grills fit flush with the nose, and on the GXP the grills fit inside the bumper a little on the bottom. The problem that Rudy had with the recessed grills is he made them fit flush with the GXP nose, which caused them to stick out a little on the NA nose. So if you want the recessed grills to fit flush with both bumpers you would have to make 2 different sets.

SA - I still have not been able to compress them down enough to email, I am shooting you a PM though about them.

Wartie · « **Reply #16 on:** November 01, 2012, 10:16:26 AM »

Quote from: Sly Bob on October 31, 2012, 08:09:15 PM

Recessed grills? If you do it I want a set for sure. I have a set of the Aftershock ones that I can uninstall if someone needs them to help with design. They aren't a perfect fit but might help.

Bob,
Some up close pictures would be a great help, maybe hold a tape measure in the picture for reference. I am also taking a stab at this. I could really use a depth or recess measurement as well.

idkfa · « **Reply #17 on:** November 01, 2012, 10:34:43 AM »

Just host them on your website or any free filesharing site like mediafire.com or filedropper.com. That's actually what they're for

You can even password protect the archive if you don't want it public domain.

Sol Asylum · « **Reply #18 on:** November 01, 2012, 11:10:25 AM »

Quote from: ChopTop on November 01, 2012, 08:57:08 AM

Far as I know Rudy is only person who has the actual 3D/CAD recessed grills files. Would it be an option to see if he'd supply or sell them? I have a unused set, but not even sure a college with a 3D printer would be willing to scan them, let alone knowing the charge to produce a CAD file.

I am not really worried about getting Rudy's CAD files for the grills I can create my own. The file from DDM would help to make sure that the grills I drew would fit in the bumper cover. I haven't really looked at Rudy's product but from what I understand it could use some refinement.

EarthNTX · « **Reply #19 on:** November 01, 2012, 11:48:33 AM »

I really love the look of those grills. Wish I had some.

Sly Bob · « **Reply #20 on:** November 01, 2012, 01:17:51 PM »

Pictures with sizes? ChopTop, can you take some and post them here? My car is in storage and I can get access to it if we need this but it's a ways from home.

I will certainly drive there and take some if you guys need them. Looking forward to this. A set printed in ABS would be awesome. I would pay and I expect I would have to pay more than I did for the original set I bought from Rudy.

Like Dave said, the grills although the same for the NA and the GXP fit a little differently in the bumper. Even Rudy's grills although made for the GXP, never really fit properly in mine. They look great, don't get me wrong, but they could fit better than they do.

Sol Asylum · « **Reply #21 on:** November 01, 2012, 01:24:05 PM »

Quote from: Sly Bob on November 01, 2012, 01:17:51 PM

...never really fit properly in mine. They look great, don't get me wrong, but they could fit better than they do.

That's kind of what I have heard and thus my refinement comment. With a CAD model of the bumper those kind of things should be able to be worked out before parts are even made.

DeepBlueGXP · « **Reply #22 on:** November 01, 2012, 01:31:08 PM »

Quote from: Dave@DDMworks on November 01, 2012, 09:01:54 AM

The grills are the same on the NA and the GXP, on the NA the grills fit flush with the nose, and on the GXP the grills fit inside the bumper a little on the bottom. The problem that Rudy had with the recessed grills is he made them fit flush with the GXP nose, which caused them to stick out a little on the NA nose. So if you want the recessed grills to fit flush with both bumpers you would have to make 2 different sets.

SA - I still have not been able to compress them down enough to email, I am shooting you a PM though about them.

I can setup a FTP for you and John if you want, or you can use yousendit dot come

Dave@DDMworks · « **Reply #23 on:** November 01, 2012, 01:42:54 PM »

Quote from: DeepBlueGXP on November 01, 2012, 01:31:08 PM

I can setup a FTP for you and John if you want, or you can use yousendit dot come

I think we got it worked out, but if not I will take you up on it.

Thanks Joe!
Dave

Critterman · « **Reply #24 on:** November 01, 2012, 02:22:05 PM »

Recess grills, one set please.

News:

Author Topic: Solstice Recessed Grills (Read 280292 times)