Author Topic: What did you do to your Kappa today! (Read 1263832 times)

DickW · « **Reply #550 on:** March 29, 2010, 11:37:27 AM »

Took it to the dealer and they ordered the 2 valves for the cooling system. Bought an extended warranty. It is the best one I could find.

DeepBlueGXP · « **Reply #551 on:** March 29, 2010, 12:21:42 PM »

Took mine back to the dealer for a P0496 emission code.

smartin · « **Reply #552 on:** March 29, 2010, 12:45:56 PM »

Mine passed emissions. But it still throws a code now and then.

1LILNDN · « **Reply #553 on:** March 30, 2010, 08:37:41 PM »

WOW I haven't been home and not touched it in 2 weeks. Going to do the eye-lids on wednesday If I get the painting done . If the

Rain

leaves . Also doing a Model of it 1/18 scale .

Sly Bob · « **Reply #554 on:** March 30, 2010, 09:02:02 PM »

Trying to get the recessed grills painted. I bought the paint a week ago and I now have a renewed appreciation for those that do it for a profession. Have to prime again as I've been having issues.

A few more days and I will post pictures.

snaponbob · « **Reply #555 on:** March 30, 2010, 09:48:12 PM »

STILL waiting for CCW to get my wheels built. But, the weather is great (FINALLY) so I decided to work on the car. Having already swapped to heavier springs a few weeks back I thought I would check the alignment in prep for the Solo season. Seems like it sat higher with the stiffer springs (Duh, huh?), and I thought I had adjusted the collars enough. WRONG. So, measured the cambers, put the car up on stands, dropped the collars another 1/2", and aligned the car to -2.7 deg front and -1.9 deg rear cambers, put it down on my home made skid plates, did a string job to set the toe settings, confirmed my cambers, and took it off the plates. Two and half hours. It's getting quicker!!!

Now I wait for the wheels.

Brad Kenny · « **Reply #556 on:** March 30, 2010, 10:14:23 PM »

Cried as I watching it rain 10" at my house flooding everything... except the garage. At least Lindsey is okay... Basement, that's another story.

I have my Rally stripes for install from ASAP, any last minute advice, lessons learned on graphics installs before I start on Wenesday afternoon???

crappa · « **Reply #557 on:** March 31, 2010, 01:47:24 AM »

Last night while driving home my A-pillar gauge illumination went out. I realized it was nice not to have those red lights staring me in the face during a relaxing drive. Today I fixed the loose wire tap and installed a switch so I can turn them off at will.

nomead · « **Reply #558 on:** March 31, 2010, 08:04:58 AM »

Added 4 ExtremeContact DWS tires...
after hearing all the good press these tires were getting here and elsewhere, I replaced the stocks.
What a difference!

Looking forward to the dragon with these tires!

Critterman · « **Reply #559 on:** March 31, 2010, 09:24:29 AM »

Took the cover off and drove it to work today, supposed to by sunny and in the high sixties. top down and the long way home after work.

DickW · « **Reply #560 on:** March 31, 2010, 09:33:55 AM »

Ordered a Pioneer AVIC-Z110BT nav unit. It is their flagship unit. I got it for 999.00 and I get a 200.00 rebate which cuts it to 799.00. Crutchfield wants 1399.00 with a 200.00 rebate for total of 1199.00. Ordered all the accessories Joe said I needed. He will install it for me.

smartin · « **Reply #561 on:** March 31, 2010, 01:06:23 PM »

^ NIIIIICE!

Getting ready to drop the top and take my Sol down the Parkway!

DeepBlueGXP · « **Reply #562 on:** March 31, 2010, 03:37:15 PM »

Quote from: CT_Solstice on March 30, 2010, 10:14:23 PM

Cried as I watching it rain 10" at my house flooding everything... except the garage. At least Lindsey is okay... Basement, that's another story.

I have my Rally stripes for install from ASAP, any last minute advice, lessons learned on graphics installs before I start on Wenesday afternoon???

clay bar before you put them on. Then use soapy water.

elff · « **Reply #563 on:** March 31, 2010, 04:25:00 PM »

I drove mine today
WOOT.
Gonna put the top down for the ride home.

GXPinKC · « **Reply #564 on:** March 31, 2010, 05:24:34 PM »

The sun was brightly shining and it was beautiful outside and I had some things to do so I had taken off for the day my volunteering for the Kansas University Medical Center and put the top down and drove my baby. That's what I did! Prior to that I worked out at the Prairie Life Center and walked 5 miles on the track. Tomorrow is another great day weather wise so Miss Red Eagle gets to go out again as I have my appointment with my Trainer at the Prairie Live Center. I recommend to anyone to join a YMCA or health club.

We have had some rain last week so could not drive the Eagle, and when winter finally ended we found out that it was the most snow ever recorded in Kansas City, (45 inches for the winter).

Then it rained for two weeks and now back to sanity. Life is good again!

Sly Bob · « **Reply #565 on:** March 31, 2010, 05:42:45 PM »

I painted the center honeycomb of the recessed grills. Tomorrow I blow in the outer ring. I'm not a painter but this has been a learning experience to say the least.

I now have more respect for those that do this for a living.

baconbits · « **Reply #566 on:** March 31, 2010, 06:45:38 PM »

Put the insurance back on it...usually do it May 1 ..but it was 75f here today.. and 10 days this month new high temperature records were set..the snow normally this time of year is 2 feet on my driveway in front of the garage..no snow no rain and forest fire season has started..strange days indeed

Critterman · « **Reply #567 on:** March 31, 2010, 07:39:56 PM »

Took the long way home with the top down, it is so much fun to have the rear squiggle when you hit the gas..............

JimmyBaja · « **Reply #568 on:** March 31, 2010, 07:51:21 PM »

How's that for service boys & girls!!! My SOLO Performance exhaust arrived today, I just ordered it Monday! And not only that, I allready have it installed & test driven!!!!!!!!!!!!!!!!!!!! Only took 2 1/2 hrs including cool down time. IIIIIILLLLLIIIIIIIIIke it!!! Now just waiting on the fascia from Norm's.

I haven't installed the high flow cat yet, I wanted to see how it is without it, will probably do that tomorrow.

spicy3480 · « **Reply #569 on:** March 31, 2010, 08:15:43 PM »

Broke the door handle for the 3rd time!!! These handles are made like crap. Anyone else have this experience?

elff · « **Reply #570 on:** April 01, 2010, 12:00:30 AM »

My Driver side handle is hanging on for dear life.
I'm going to see if I can have the dealer replace it with a Black one so I don't have to rewrap it.
Whatever happened with the aftermarket ones?

1LILNDN · « **Reply #571 on:** April 01, 2010, 12:43:49 AM »

I installed a pair of black cobalt Handles on mine and the OEM's were still like New and worked like new.

smartin · « **Reply #572 on:** April 01, 2010, 10:24:01 AM »

My handles work fine!

Brad Kenny · « **Reply #573 on:** April 01, 2010, 10:30:16 AM »

Today is the wash, clay bar, and ASAP graphics Rally Stripes install, day ONE!!!

I will try to upload before and after pics with progress review while I work.

This should be "fun"... Nerve racking, car ruining, ahhhhhh!!!

SLOW IS FAST when it comes to Mods.

Brazen17 · « **Reply #574 on:** April 01, 2010, 12:56:53 PM »

Got my new Porter-Cable DA buffer in and am about to go practice!

News:

Author Topic: What did you do to your Kappa today! (Read 1263832 times)

nomead