Author Topic: Solstice Recessed Grills (Read 263471 times)

He was just relaying what Dave had told us that he only has the cad file for the NA.

Hey DBG do you still have that cracked GXP front bumper cover off of Sal's car and maybe a set of grills?

Sly Bob · « **Reply #34 on:** November 01, 2012, 07:33:41 PM »

Quote from: Sol Asylum on November 01, 2012, 06:59:56 PM

Wartie's name is the same as yours Bob

I knew that too...

Sorry Wartie.

Wartie · « **Reply #35 on:** November 01, 2012, 07:48:50 PM »

Quote from: Sly Bob on November 01, 2012, 05:52:01 PM

Sorry Dave but I was referring to DDM Dave.

Sorry "Frank"

but the answer is the same. He does not either. BTW, Dave was my dad's name.

And I have a spare set of grilles from an '06

Sol Asylum · « **Reply #36 on:** November 01, 2012, 08:52:44 PM »

Quote from: Wartie on November 01, 2012, 10:16:26 AM

Bob,
Some up close pictures would be a great help, maybe hold a tape measure in the picture for reference. I am also taking a stab at this. I could really use a depth or recess measurement as well.

Agreed we need to get an idea of how far the grills are recessed.

Dave as per our agreement here is my attempt at payment

Will that work?

Sly Bob · « **Reply #37 on:** November 01, 2012, 09:00:52 PM »

Quote from: Sol Asylum on November 01, 2012, 08:52:44 PM

Agreed we need to get an idea of how far the grills are recessed.

Maybe ChopTop will chime in.

ChopTop · « **Reply #38 on:** November 02, 2012, 07:38:59 AM »

Need clarification. Pics or access to the uninstalled set?

I'm not even sure what type of composite Rudy used, it's similar to plaster paris. That's the reason the installation taps break, there's no flexibility in the tabs due to the composite they were molded in.

Whereas the OEM plastic grill and tabs are molded in the same type of plastic but the taps still have a little flexibility that allows for repeated installation or removal.

Also, Rudy design is two parts*. The outer recessed inset grill with molded in tabs, and the inner separate hexagon grill. Which is why you either have to use silicon or fine screws to hold them inside the outer recessed grill.

*four actual pieces. L/R recessed grill, plus L/R hexagon grill.

Wartie · « **Reply #39 on:** November 02, 2012, 07:52:12 AM »

That is very interesting about the two part design, that was actually one of my thoughts on a design. SA is taking the lead on the design, I will let him chime in on the grilles. Access to uninstalled grilles would probably help him the most.

Sly Bob · « **Reply #40 on:** November 02, 2012, 09:04:15 AM »

The two piece design is nice in the fact that it's easy to paint the grills a diffent color than the outside ring. I found that worked well in my case and they look great installed as long as you don't look too close.

Here's what they looked like installed.

http://www.kappaperformance.com/forum/index.php/topic,4298.msg58003.html#msg58003

Critterman · « **Reply #41 on:** November 02, 2012, 09:07:56 AM »

Quote from: Sly Bob on November 02, 2012, 09:04:15 AM

they look great installed as long as you don't look too close.

http://www.kappaperformance.com/forum/index.php/topic,4298.msg58003.html#msg58003

I think that statement says it all.

Sly Bob · « **Reply #42 on:** November 02, 2012, 09:11:50 AM »

I'd be interested in paying a few bucks into a pot via PayPal to help with shipping and development costs to help bring these to fruition.

I was going to pull the recessed grills off the car this winter to modify the mounting system to use screws to mount them to the bumper and to have the outer rings repainted. Now I think I'll hold off until we see how this goes.

Sol Asylum · « **Reply #43 on:** November 02, 2012, 11:08:17 AM »

With regard to how much they are recessed I need to know how far from the outer flange the honeycomb is set back.

As far as one part or two parts that is yet to be determined.

Sol Asylum · « **Reply #44 on:** November 02, 2012, 08:17:26 PM »

You should be able to see from the picture what I need is how far back is the grill moved. Once I get that it shouldn't be too hard to draw in the missing part.

TomatoSoup · « **Reply #45 on:** November 02, 2012, 08:22:29 PM »

How difficult would it be to do alternatives to the recessed honeycomb. For example vertical lines (a La Morgan or old Jag)?

Sol Asylum · « **Reply #46 on:** November 02, 2012, 08:24:20 PM »

Just have to draw it but it could be done. Production cost would probably be the big factor.

TomatoSoup · « **Reply #47 on:** November 02, 2012, 10:27:42 PM »

Ahhh - I thought they were being plastic-printed, so the design was to be the only cost delta. My bad.

Sol Asylum · « **Reply #48 on:** November 03, 2012, 12:00:39 AM »

I guess that could be a means of production too. Once we get a model finished up we can look into things like that.

Sly Bob · « **Reply #49 on:** November 03, 2012, 05:39:08 AM »

Looks like the sides of the rings could be a little bit tapered or sloped and the grill a little smaller. Here's a close up of the rings on the BB.

http://www.solsticeforum.com/forum/f111/recessed-grill-46595/index22.html#post871119

News:

Welcome Guest!!!

Author Topic: Solstice Recessed Grills (Read 263471 times)